Geri Dön

Pressure, gas ratio and operation voltage optimization of a helium-neon laser

Helyum-neon lazerde; Basınç, gaz oranı ve çalışma voltajı optimizasyonu

  1. Tez No: 167118
  2. Yazar: HULUSİ BİROL BİLGİLİ
  3. Danışmanlar: DOÇ. DR. AKİF ESENDEMİR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
  6. Anahtar Kelimeler: HeNe Laser, Pressure, Gas Analysis, Getter IV, HeNe Laser, Pressure, Gas Analysis, Getter IV
  7. Yıl: 2005
  8. Dil: İngilizce
  9. Üniversite: Orta Doğu Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Fizik Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

ABSTRACT PRESSURE, GAS RATIO AND OPERATION VOLTAGE OPTIMIZATION OF A HELIUM-NEON LASER BİLGİLİ, Hulusi Birol M.S., Department of Physics Supervisor : Assoc. Prof. Dr. Akif Esendemir January 2005, 50 pages Aim of this thesis is to investigate the optimum working parameters of a helium- neon laser. Partial pressure ratios, total pressures of the gases and voltage-current characteristics were studied. The analysis of the results includes the minor factors (impurity, volume, etc.) and their effects to main parameters (laser power, voltage, current). Tables, which were formed by measured optical parameters as wavelength and power, converted to graphs and from these graphs optimal working conditions for the laser are obtained.

Özet (Çeviri)

ABSTRACT PRESSURE, GAS RATIO AND OPERATION VOLTAGE OPTIMIZATION OF A HELIUM-NEON LASER BİLGİLİ, Hulusi Birol M.S., Department of Physics Supervisor : Assoc. Prof. Dr. Akif Esendemir January 2005, 50 pages Aim of this thesis is to investigate the optimum working parameters of a helium- neon laser. Partial pressure ratios, total pressures of the gases and voltage-current characteristics were studied. The analysis of the results includes the minor factors (impurity, volume, etc.) and their effects to main parameters (laser power, voltage, current). Tables, which were formed by measured optical parameters as wavelength and power, converted to graphs and from these graphs optimal working conditions for the laser are obtained.

Benzer Tezler

  1. Hava boşluklu / vakum membran distilasyonu prosesleri kullanılarak jeotermal sulardan bor giderimi

    Boron removal from geothermal water by using air gap / vacuum membrane distillation processes

    ELİFNUR GEZMİŞ YAVUZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Çevre Mühendisliğiİstanbul Teknik Üniversitesi

    Çevre Mühendisliği Ana Bilim Dalı

    DOÇ. DR. DERYA YÜKSEL İMER

  2. Pem yakıt hücrelerinde kompozit bipolar plakaların üretiminde grafen kullanılabilirliğinin araştırılması

    Investigation of the usability of graphene use in the production of composite bipolar plates for pem fuel cells

    YASİN AKIN

    Doktora

    Türkçe

    Türkçe

    2025

    Makine MühendisliğiSakarya Uygulamalı Bilimler Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. İBRAHİM ÖZSERT

    DOÇ. DR. HÜSEYİN KAHRAMAN

  3. Karbotermik ferrobor üretim parametrelerinin optimizasyonu

    The optimization of parameters for the carbothermic production of ferroboron

    ONURALP YÜCEL

    Doktora

    Türkçe

    Türkçe

    1992

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    PROF. DR. OKAN ADDEMİR

  4. Düzgün olmayan alanda SF6, N2 ve SF6+N2 gazlarında boşalma gerilimlerine elektrod yüzey pürüzlülüğünün etkileri

    Effects of electrode surface roughness on corona inception and breakdown voltages in SF6, N2 and SF6+N2 in non-uniform fields

    MURTAZA FARSADİ

  5. Doğrusal kompresörlerin modellenmesi ve analizi

    Modeling and analysis of linear compressors

    MUSTAFA MELİH DOĞAN

    Doktora

    Türkçe

    Türkçe

    2024

    Mekatronik MühendisliğiDokuz Eylül Üniversitesi

    Mekatronik Ana Bilim Dalı

    PROF. DR. MUSTAFA SERHAN KÜÇÜKA

    DR. ÖĞR. ÜYESİ BARIŞ OĞUZ GÜRSES