Hafif betonun mekanik özellikleri üzerine kür şartlarının etkisi
The effect of curing conditions on mechanical properties of lightweight concrete
- Tez No: 169358
- Danışmanlar: Y.DOÇ.DR. SALİH YAZICIOĞLU
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Hafif beton, Mekanik özellikler, Agrega, Uçucu kül, Silis dumanı. VI, Lightweight Concrete, Mechanical Properties, Aggregate, Fly ash, Silica fume vn
- Yıl: 2005
- Dil: Türkçe
- Üniversite: Fırat Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Yapı Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 47
Özet
ÖZET Yüksek Lisans Tezi HAFİF BETONUN MEKANİK ÖZELLİKLERİ ÜZERİNE KÜR ŞARTLARININ ETKİSİ Cemal SÖNMEZOĞLU Fırat Üniversitesi Fen Bilimleri Enstitüsü Yapı Eğitimi Anabilim Dalı 2005, Sayfa: 40 Bu çalışmada, hafif betonun mekanik özellikleri üzerine kür şartlarının etkisi araştırılmıştır. Kaba agrega olarak Elazığ yöresi volkanik cürufu (VC), ince agrega olarak Elazığ Palu yöresi nehir kumu kullanılmıştır. Çalışmada PÇ 42.5 (CEM I 42.5 N) çimentosu ile silis dumanı (SD) ve uçucu kül (UK) iki farklı mineral katkı kullanılmıştır. Kullanılan mineral katkılarından SD %10, UK ise %20 oranlarında çimento ile ağırlıkça yer değiştirilmiştir. Bu malzemelerle hazırlanan deney numuneleri 3, 7 ve 28 günlük su, hava ve naylon kürüne tabi tutularak basınç dayanımı, yarma dayanımı ve ultrasonik test deneylerine tabi tutulmuştur. Çalışmadan elde edilen sonuçlara göre tüm beton serilerinin dayanım özellikleri kür süresine göre artmıştır. En yüksek dayanım özelliklerini su kürüne tabi tutulan numuneler ve bunu takiben naylon kürüne tabi tutulan numuneler gösterirken en düşük dayanım özellikleri hava kürüne tabi tutulan numunelerde gözlenmiştir. Farklı kürlere tabi tutulan numunelerde ise en yüksek dayanım özelliklerini silis dumanı katkılı beton serileri gösterirken, kontrol betonuna göre uçucu kül katkılı beton serileri daha düşük dayanım özellikleri göstermiştir.
Özet (Çeviri)
ABSTRACT Master Thesis THE EFFECTS OF CURING CONDITIONS ON MECHANICAL PROPERTIES OF LIGHTWEIGHT CONCRETE Cemal SONMEZOGLU Firat University Institute of Science and Technology Department of Construction Education 2005, Page: 40 It has been researched the effects of curing conditions on mechanical properties of lightweight concrete. Volcanic pumice from Elazığ neighbourhood has been used as coarse aggregate, river sand from Elazığ-Palu neighbourhood has been used as fine aggregate. Two different minerals admixtures which are silica fume (SF) and fly ash (FA) has been used in this work. They have been replaced with cement as their weight which are used as mineral additions of SF %10, FA %20, experimental samples which are prepared with those In this thesis materials have been applied with compressive strength, splite tensile strength and ultrasonic test experiments such as 3, 7 and 28 days long conditions of water, air and sealed pressure resistance and seperation resistance. As the result obtained at this work, the strength properties of all concrete series are increased by depending on their conditional time line. The highest strength properties are being obtained the samples which are effected by water conditions. Followings are the samples which are affected by sealed conditions and the less strength characteristics are being obtained which are effected air cure. While concrete specimens effectted by different curing conditions which are added with SF are shown that the highest strength properties, the concrete specimens with FA admixture did not increase.
Benzer Tezler
- Pişmiş toprak tuğla, bimsbeton, gazbeton ve perlitli yapı malzemelerinin fiziksel, kimyasal ve mekanik özelliklerinin karşılaştırmalı olarak incelenmesi
A Comparative study of brick, pumice concrete, autoclaved aerated concrete and perlite construction materials including physical, chemical and mechanical properties
YUNUS EMRE ÇİÇEK
Yüksek Lisans
Türkçe
2002
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
DOÇ. DR. MUSTAFA E. KARAGÜLER
- Çimento yerine sığır gübresi külünün kısmi ikamesi ile üretilen pomza agregalı hafif betonun mekanik ve fiziksel özellikleri üzerine etkisinin araştırılması
Investigation of the effect on the mechanical and physical properties of pumice aggregate lightweight concrete produced by partial replacement of cattle manure ash instead of cement
AHMET KORKMAZ
Yüksek Lisans
Türkçe
2024
ZiraatAtatürk ÜniversitesiTarımsal Yapılar ve Sulama Ana Bilim Dalı
PROF. DR. SIRRI ŞAHİN
- The effect of nano-silica on the gas permeability, durability and mechanical properties of high strength lightweight aggregate concrete
Nano-silikanın, yüksek dayanımlı hafif agregalı betonlar üzerinde, gaz geçirgenliği, ışlenebilirlik ve mekanik özelliği etkileri
MOHAMMED LAYTH ABBAS
Yüksek Lisans
İngilizce
2017
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NİHAT ATMACA
YRD. DOÇ. DR. ADEM ATMACA
- Thermal and mechanical performance of cementitious PCM composites
Çimentolu FDM kompozitlerinin ısıl ve mekanik performansları
ERMAN YİĞİT TUNCEL
Doktora
İngilizce
2020
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. BEKİR YILMAZ PEKMEZCİ
- Hafif ve normal agregalı betonların fiziksel ve mekanik özellikleri üzerine farklı kür koşullarının etkisi
The influence of different curing conditions on the physical and mechanical properties of lightweight and normal aggregate concrete
OSMAN GEÇTEN
Doktora
Türkçe
2005
İnşaat MühendisliğiAtatürk Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF.DR. RÜSTEM GÜL