Borlu polimer-odunkompozitleri
Polymer with boron-wood composite
- Tez No: 177088
- Danışmanlar: PROF. DR. M. HAKKI ALMA
- Tez Türü: Yüksek Lisans
- Konular: Ormancılık ve Orman Mühendisliği, Forestry and Forest Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2008
- Dil: Türkçe
- Üniversite: Kahramanmaraş Sütçü İmam Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Orman Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 116
Özet
Bu tezde borik asit kullanılarak, sıcaklık ve sürelerde borlu fenol formaldehit polimerleri sentezlenmiştir. Elde edilen polimerler ile odun talaşları ve yerfıstığı kabuğu talaşları belli oranlarda karıştırılarak yeni kompozitler elde edilmiştir. İlk önce sentezlenen borlu polimerlerin ısıl dirençleri, bağlı bor miktarı ve FT-IR spektraları, serbest fenol miktarları, erime dereceleri ve moleküler ağırlıkları tayin edilerek ticari fenol formaldehit reçinesi ile karşılaştırılmıştır. Özellikle bu polimerlerde bağlı fenol miktarlarına ve FT-IR spektralarına dayanarak borun bu polimerlere kimyasal olarak bağlandığı tespit edilmiştir. Sonra, sentezlenen bu polimer, odun talaşları ve yerfıstığı kabuğu talaşlarının belirli oranlarda eklenerek elde edilen kompozitlerin fiziksel, mekanik ve bazı biyolojik bozunma özellikleri yapılmıştır. Bu polimerlerden elde edilen yeni kompozitlerin söz konusu özellikleri, ticari olarak üretilen borsuz fenol formaldehit polimer esaslı kompozitlerin özellikleri ile karşılaştırılmıştır. Borlu polimer-odun kompozitlerin bazı fiziksel (ısı iletkenliği, elektrik direnç parametreleri, su almaya karşı direnci, mikroskopik yapısı) ve mekanik (eğilme direnci, eğilmede elastikiyet modulü ve çentik şok direnci) özelliklerinde ticari fenol formaldehit polimer esaslı kompozitlerinkine göre olumlu anlamda iyileşmeler tespit edilmiştir.
Özet (Çeviri)
In this thesis, boron-based phenol formaldehyde polymers were synthesized by using boric acid at different reaction conditions (e.g., temperature and residence time), and new composites were obtained by mixing them with wood powders and peanut shell. First of all, the thermal resistance, melting points, the ratio of boron bonded with polymers, FT-IR spectra, free phenol content, and molecular weights of the boron modified polymers were determined, and those properties were compared to commercial phenol formaldehyde polymers. It was found that boron was reacted with phenol formaldehyde resin type polymers on the basis of the content of reacted boron determined and FT-IR spectra. Then, the physical, mechanical and some biological degradation properties of the composites made of the combination of boron- modified polymers, wood powders and peanut shell powders were done and compared with those of commercial phenol formaldehyde polymer-based composites. The results showed that some physical (thermal conductivity, the parameters of electrical conductivity, water resistance and microscopic structure) and some mechanical properties (bending strength, elasticity of modulus for bending strength and izod impact strength) of the composites made of the boron-modified based polymer and wood powders were improved in comparison to those of the ones prepared from commercial phenol formaldehyde polymers and wood powders.
Benzer Tezler
- Borik asit ve polikaprolakton modifikasyonunun ahşabın biyolojik dayanım ve boyut stabilizasyonu ile bor yıkanmasına etkisi
The effect of boric acid and polycaprolactone modification on biological resistance, dimensional stability and boron leaching of wood
ZEYNEP NUR KARTAL
Yüksek Lisans
Türkçe
2019
Ağaç İşleriBursa Teknik ÜniversitesiBiyokompozit Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MAHMUT ALİ ERMEYDAN
- Production and characterization of boron containing flame retardant polyamide-6 and polypropylene composites and fibers
Bor içeren güç tutuşur polamid-6 ve polipropilen kompozitlerin ve liflerin üretilmesi ve karakterizasyonu
MEHMET DOĞAN
Doktora
İngilizce
2011
Polimer Bilim ve TeknolojisiOrta Doğu Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Bölümü
PROF. DR. ERDAL BAYRAMLI
- Borlu emprenye maddeleri ile ön işleme tabi tutulan kayın odunundan hazırlanan odun polimer kompozitlerinin fiziksel, mekanik, termal ve üst yüzey özellikleri
Physical, mechanical, thermal and surface characteristics of wood-polymer composites prepared from beech wood pretreated with boron-compounds
MEHMET GEÇER
Yüksek Lisans
Türkçe
2015
Ağaç İşleriMuğla Sıtkı Koçman ÜniversitesiAğaç İşleri Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. ERGÜN BAYSAL
- Alev geciktirici katkı maddelerinin kauçuk malzemede mekanik ve yanma özelliklerine etkisinin incelenmesi
An investigation of flame retardants in rubber materilas on their mechanical and flammibility properties
MESUT DEMİRTAŞ
Yüksek Lisans
Türkçe
2012
Polimer Bilim ve TeknolojisiKarabük ÜniversitesiMetal Eğitimi Ana Bilim Dalı
DOÇ. DR. MUSTAFA ACARER
PROF. DR. ŞENNUR CANDAN
- Polimer matris kompozit malzemelerde çeşitli bor bileşiklerinin katkısının mekanik ve termal özellikler üzerine etkisi
The effect of additives of various boron compounds on mechanical and thermal properties of polymer matrix composite materials
MERVE BİLGE
Yüksek Lisans
Türkçe
2023
Polimer Bilim ve TeknolojisiGazi Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ALİ ÖZGEDİK