Geri Dön

Exergetic and thermoeconomic performance analysis and optimization of diesel engine powered cogeneration systems

Dizel motorlu kojenerasyon sistemlerinin ekserjetik ve termoekonomik performans analizi ve optimizasyonu

  1. Tez No: 179657
  2. Yazar: AYŞEGÜL ABUŞOĞLU
  3. Danışmanlar: DOÇ. DR. MEHMET KANOĞLU
  4. Tez Türü: Doktora
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Birleşik Isı ve Güç Üretimi (CHP), Kojenerasyon, Dizel Motor, Enerji, Ekserji, Eksergoekonomik Analiz, Termoekonomik Analiz, Optimizasyon, Combined Heat and Power (CHP), Cogeneration, Diesel Engine, Energy, Exergy, Exergoeconomic Analysis, Thermoeconomic Analysis, Optimization
  7. Yıl: 2008
  8. Dil: İngilizce
  9. Üniversite: Gaziantep Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 313

Özet

Bu çalışmada, termoekonomik analiz ve optimizasyon yaklaşımı, Gaziantep'te bulunan, 25.32 MW elektrik ve 8100 kg/saat buhar çıktısı olan ağır yakıtlı ve dizel motor tahrikli gerçek bir kojenerasyon sistemine, Sanko Dizel Motorlu Kojenerasyon'a uygulanmıştır. Bu çalışmada sunulan yaklaşım, herhangi bir sistem bileşeni için verilen maliyet ve performans girdilerinin birleşiminin, sistemdeki bileşenlerin ürün çıktılarının ekserjileri ve yakıt maliyetleri sabit kalmak koşuluyla, optimum dizayn şartlarında hesaplanmasını mümkün kılan iteratif (yinelemeli) bir performans iyileştirme yöntemidir. Kojenerasyon sistemine giren yakıtın ekserjisi 62,800 kW olarak hesaplanmıştır. Sisteme giren toplam yakıt ekserjisinin %40.4' ü elektriğe, % 0.3' ü ise buhara çevrilmektedir. Dizel motorlu kojenerasyon sisteminin ikinci kanun (ekserji) verimi %40.6 olarak hesaplanmıştır. Gerçek çalışma şartlarında sisteme giren yakıtın ekserjiye bağlı maliyeti ve birim ekserji maliyeti sırasıyla 1806 $/saat ve 2.70 $/GJ bulunmuştur. Sistemdeki dizel motorlar için yakıt girdisi değerleri sırasıyla 1933.3 $/saat ve 2.85 $/GJ olarak hesaplanmıştır. Gerçek çalışma şartlarında elektrik maliyeti 10.31 $/GJ (8.90 ¢/kW-saat) bulunmuştur. Termoekonomik optimizasyon çalışması neticesinde elektrik maliyeti 8.38 $/GJ (6.70 ¢/Kw-saat) olarak hesaplanmıştır, termodinamik optimizasyon sonucunda ise elektrik maliyeti 21.36 $/GJ' e (23.18 ¢/kW-saat) yükselmektedir. Sistemde üretilen buharın gerçek çalışma şartlarında, termodinamik ve termoekonomik optimizasyon çalışmaları sonucunda maliyeti sırasıyla, 5.22 ¢/kW-saat, 10.04 ¢/kW-saat, and 4.50 ¢/kW-saat olarak hesaplanmıştır. Egzoz emisyon analiz sonuçlarına göre, birleşik ısı ve güç kullanımı, ısı ve gücün ayrı üretildiği sistemlere göre enerji ve ekserjiye bazlı analizlerde yakıt tüketiminde sırasıyla %23.84, ve %17.25 oranında bir tasarruf sağlamaktadır.

Özet (Çeviri)

In this thesis, we perform exergetic and thermoeconomic performance analysis and optimization of diesel engine powered cogeneration systems. The procedure and formulation of thermodynamic and thermoeconomic analysis are provided and they are applied to an actual cogeneration system located in Gaziantep, Turkey [Sanko Diesel Engine Powered Cogeneration (DEPC) plant] with an electrical power of 25.32 MW and a steam mass flow rate of 8100 kg/h. The approach presented in this thesis is an iterative performance improvement procedure in which the integration of the cost and performance data for a given system component permits the calculation of optimum design conditions when the exergy of the component product and the cost of the component fuel based on SPECO approach remain constant. The exergy input to the plant by fuel is 62,800 kW and 40.4% of this exergy is converted to electrical power while steam production accounts for 0.3% of exergy input. The corresponding exergetic efficiency of this cogeneration plant is 40.6%. The exergetic cost rate and the specific unit exergetic cost of the fuel entering the plant are determined to be 1806 $/h and 2.70 $/GJ, respectively. In optimization studies of the plant, the electricity cost and steam cost are determined for three cases. The electricity cost is 8.90 ¢/kWh in actual base case, 6.70 ¢/kWh in thermoeconomically optimal case, and 23.2 ¢/kWh in thermodynamically optimal case. The steam costs are 5.22 ¢/kWh, 4.50 ¢/kWh, and 10.04 ¢/kWh, respectively, in these three cases. Exhaust emission characteristics of DEPC plant are also assessed, and we determined that using combined power and heat production provide fuel savings of 23.8% in energy approach and 17.3% in exergy approach with respect to separate units of power and heat production.

Benzer Tezler

  1. Gemilerde organik rankine çevrimine dayalı atık ısı geri kazanım sistemlerinin ileri termal analizleri ve termo-ekonomik optimizasyonu

    Advanced thermal analyses and thermo-economic optimization of waste heat recovery systems based on organic rankine cycle onboard ships

    MEHMET AKMAN

    Doktora

    Türkçe

    Türkçe

    2021

    Enerjiİstanbul Teknik Üniversitesi

    Gemi İnşaatı ve Gemi Makineleri Mühendisliği Ana Bilim Dalı

    PROF. DR. SELMA ERGİN

  2. Jeotermal bölgesel ısıtma sistemlerinin ekserjik ve ekonomik analizi

    Exergoeconomic analysis of geothermal district heating systems

    LEYLA ÖZGENER

    Doktora

    Türkçe

    Türkçe

    2005

    Makine MühendisliğiEge Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ.DR. ARİF HEPBAŞLI

    PROF.DR. İBRAHİM DİNÇER

  3. Bir ham petrol destilasyon ünitesinin kullanılabilir enerji ve termoekonomik analizi

    Exergetic and thermoeconomic analyses of a crude oil distillation unit

    ÖMER FARUK DİLMAÇ

    Doktora

    Türkçe

    Türkçe

    2011

    EnerjiYıldız Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. ESEN BOLAT

    YRD. DOÇ. DR. SEMRA ÖZKAN

  4. Güneş enerjisi kaynaklı ısı pompası destekli ısıtma sistemlerinin termodinamik ve termoekonomik analizi

    Thermodynamic and exergetic analysis of solar heat pump assisted heating systems

    ZOZAN SİYAHHAN

    Doktora

    Türkçe

    Türkçe

    2009

    Makine MühendisliğiYıldız Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. GALİP TEMİR

  5. Plastik parça üretim tesisinin termoekonomik analizi

    Thermoeconomic analysis of a plastic parts production facility

    MEHMET MURAT GÜR

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Makine MühendisliğiBayburt Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. RABİ KARAALİ