Işıkla polimerizasyon cihazlarının estetik dolgu materyalleri üzerine etkilerinin incelenmesi
Investigation of the effects of light curing units on esthetic filling materials
- Tez No: 196112
- Danışmanlar: PROF. FAİK BÜLENT TOPBAŞI
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: FTIR, LED, mikro sertlik, dönüsüm derecesi, nanokompozit, FTIR, LED, microhardness, conversion degree, nanocomposite
- Yıl: 2007
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Diş Hastalıkları ve Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 135
Özet
Kompozit materyallerin mekanik ve biyolojik özellikleri, polimerizasyon derecesinden ileri derecede etkilenmektedir. Polimerizasyon derecesi, direkt olarak FTIR spektral analizi ile veya indirekt olarak mikro sertlik testleri ile ölçülebilir. Çalısmamızın amacı farklı ısıklı cihazlarla polimerize edilen kompozitlerin, değisik renk ve kalınlıklarda, polimerizasyon derecesini direkt ve indirekt yöntemlerle belirlemek ve bu test yöntemlerinin hassasiyet derecesini ortaya çıkarmaktır. Çalısmamızda bu amaçla, farklı yapılarda olan 3 değisik kompozit materyalden (Supreme, Venus, Admira), A1 ve C3 renkleri 2 mm. kalınlıkta, 40 sn. 1 QTH (Coltolux) ve 2 LED (Freelight II, Cellalux) ısıklı cihazla polimerize edilmis toplam 18 grup olusturulmustur. Bunun yanında Supreme marka kompozitten, 2 mm kalınlıkta 20 sn ve 4 mm. kalınlıkta 40 sn. aynı ısıklı cihazlar kullanılarak, 12 grup daha elde edilmistir. Olusturulan grupların Vickers mikro sertlik testi ile alt ve üst tabakasından sertlik değerleri, FTIR-ATR spektral analiz testi ile de alt tabakasından monomer değisim seviyeleri belirlenip, istatistiksel analize tabi tutulmustur. Çalısmamızda, monomer değisim seviyeleri ve mikro sertlik testleri arasında belli noktalarda farklılıkların olustuğu gözlemlenmistir. Bu farklar genel olarak materyalin doldurucu partikül yapısı, rengi ve kalınlığı ile alakalı durumlarda ortaya çıkmıstır. Mikro sertlik testlerinin her kosulda monomer değisim seviyesini gösteremeyeceği, özellikle Supreme gibi yeni gelistirilmis monomer ve doldurucu içeren kompozit materyallerin değerlendirilmesinde, daha hassas yöntemlere ihtiyaç olduğu sonucuna varılmıstır. Kompozit materyallerde son dönemde kullanılmaya baslanan yeni monomer ve doldurucu partiküllerin, monomer değisim seviyesini ve mikro sertlik değerlerini olumlu yönde etkilediği tespit edilmistir. Bunun yanında polimerizasyonun gerçeklestirildiği cihazın bu özelliklerin olusmasında büyük önem tasıdığı, özellikle ikinci jenerasyon LED cihazlarının polimerizasyon basarısının halojen cihazlardan daha üstün olduğu belirlenmistir.
Özet (Çeviri)
Mechanical and biological properties of composite resins mostly depend on the polymerization degree. The polymerization degree can be determined directly by FTIR spectral analysis or indirectly by microhardness measurement. The aim of this study is to determine the polymerization efficiency of different light curing units on different kind of composites, at different shades and thickness with direct and indirect measurements for polymerization degree and to find out the sensitivity of these methods. For this purpose we used 3 different composite materials (Supreme, Venus, Admira)of A1 and C3 shade and polymerized them with 1 QTH (Coltolux) and 2 LED (Freelight II, Cellalux) curing lights for 40 sec. at 2 mm. thickness to form 18 group. Also, from the composite Supreme we formed another 12 group from 2 mm. thickness at 20 sec. and 4 mm. thickness at 40 sec. curing times. We determined microhardness with Vickers tester and the degree of monomer conversion with FTIR-ATR spectral testing. The data were statistically analysed. The negative correlation found between the two test methods can be mostly attributed to the inorganic filler particule type, shade and thickness. We found out that microhardness measurement can not always be assigned for the degree of conversion. In particular, composite resins like Supreme, that have newly developed monomer and inorganic filler type, need to be tested using more sensitive methods. Another finding is that the newly developed monomer system and the filler particles have a positive effect on the both the monomer conversion and the microhardness. In addition to this, the light curing unit has an important role in the formation of these features; especially the 2.nd generation LED curing units which are capable of curing composites better than the high power output QTH units.
Benzer Tezler
- Farklı ışık cihazları ve farklı uygulama teknikleri ile polimerize edilen bir posterior kompozitin mikrosertlik, polimerizasyon büzülmesi ve polimerizasyon esnasinda açığa çıkan ısı açısından değerlendirilmesi
The evaluation of microhardness, polymerization shrinkage and the heat released during polymerization of a posterior composite polymerized with different techniques and different light devices
CİHAN ÖZ
Doktora
Türkçe
2014
Diş HekimliğiDicle ÜniversitesiÇocuk Diş Hekimliği Ana Bilim Dalı
DOÇ. DR. BUKET AYNA
- Synthesis of conjugated polymers through light- induced step-growth polymerization
Işıkla başlatılmış kademeli büyüme polimerizasyon yoluyla konjuge polimerlerin sentezi
TUĞBA ÇELİKER
Doktora
İngilizce
2023
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. YUSUF YAĞCI
PROF. DR. BARIŞ KIŞKAN
- Polisaj sonrası ekstra polimerizasyon uygulamasının kompozit rezinlerde renk değişimine etkisinin araştırılması
Effect of extra polymerization after polishing procedures on color stability of composite resins
KÜBRA ALAN
Diş Hekimliği Uzmanlık
Türkçe
2016
Diş HekimliğiOndokuz Mayıs ÜniversitesiRestoratif Diş Tedavisi Ana Bilim Dalı
YRD. DOÇ. DR. EMEL KARAMAN
- Kompozit rezinin yüzey sertlik değerleri üzerine farklı ışık cihazlarının etkisi
Effect of different light curing units on the surface hardness of a composite resin
HAKAN AKTÜRK
Doktora
Türkçe
2007
Diş HekimliğiAnkara ÜniversitesiDiş Hastalıkları ve Tedavisi Ana Bilim Dalı
PROF.DR. GÜRKAN GÜR
- Farklı ışık kaynakları ile polimerize edilen rezin simanın fiziksel özelliklerinin değerlendirilmesi
Evaluation of physical properties of resin cement with different light sources
BAHADIR DÖKMEZ
Doktora
Türkçe
2006
Diş HekimliğiAnkara ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF.DR. AYHAN GÜRBÜZ
PROF.DR. DERYA ÖZTAŞ
PROF.DR. RIZA GÜRBÜZ