A comparative study of modeling methods for two-dimensional electromagnetic scattering data
Elektromanyetik saçılım verilerinin iki-boyutlu modelleme yöntemleri icin karşılaştırmalı bir çalışma
- Tez No: 200401
- Danışmanlar: PROF.DR. LEVENT GÜREL
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Matrix pencil method (MPM), matrix enhancement and matrix pencil (MEMP) method, 2D modeling, electromagnetic scattering data
- Yıl: 2007
- Dil: İngilizce
- Üniversite: İhsan Doğramacı Bilkent Üniversitesi
- Enstitü: Mühendislik ve Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 74
Özet
Bu ara»st³rman³n amac³, elektromanyetik sa»c³l³m problemlerinde kar»s³la»s³lan iki boyutlu verilerin model tabanl³ parametre tahmin tekni~gi kullanarak modellen- mesidir. Birka»c Äornekten olduk»ca do~gru bir model olu»sturulduktan sonra, bu model kullan³larak orijinal Äornekler istenilen herhangi bir noktada ve istenilen say³da interpolasyon veya extrapolasyon yap³labilir, bu da haf³zada depolanmas³ ve Äol»cÄulmesi gereken verilerin say³s³n³n azalt³lmas³n³ sa~glar. Bu yÄontemin di~ger bir avantaj³ ise, hesaplamalar³n numerik Äornekler yerine analitik model Äuzerinde yap³labilmesidir; bu sayede hesaplamalar³n karma»s³kl³~g³ azalt³lm³»s olur. Modeldeki terim say³s³n³n yÄuksek olmas³, daha hassas »cÄozÄum imkan³ sa~glasa da, hesaplaman³n karma»s³kl³~g³n³ ve haf³za gereksinimini de artt³r³r. Bu sebepten dolay³, bu ara»st³rman³n di~ger bir amac³ ise optimizasyon problemini »cÄozerek, has- sasiyeti maksimize edip, ayn³ zamanda terim say³s³n³ minimumda tutmakt³r. Bu »cal³»smada, Äozellikle matris kalem metodu olmak Äuzere bir »cok modelleme tekni~gi kar»s³la»st³r³lm³»st³r. Bu tekniklerin performans³n³n artt³r³labilmesi i»cin baz³ teknikler Äonerilmi»s, avantajlar³ ve dezavantajlar³ tart³»s³lm³»st³r. Ayr³ca, Äonerilen tekniklerin kullan³lmas³n³n daha iyi modeller sa~glad³~g³ gÄosterilmi»s, fakat uygu- lan³labilirli~gi daha yÄuksek alternati°er geli»stirmeye yÄonelik baz³ noktalara da de~ginilmi»stir. Anahtar sÄozcÄukler : Matris kalem yÄontemi, matris geli»stirme ve matris kalem yÄontemi, iki-boyutlu modelleme, elektromanyetik sa»c³l³m verisi.
Özet (Çeviri)
The aim of this research is to model two-dimensional data encountered in elec- tromagnetic scattering problems using model-based parameter estimation tech- niques. Once a highly accurate model is constructed from a few samples, the model can then be used to interpolate between or extrapolate from the original samples at any desired point and any number of times, thus reducing the amount of data needed to be stored in memory or required to be measured. An added advantage is that the computations required to be carried out on the numerical samples can instead be carried out on the analytical model, which may reduce the computational complexity. It is intuitive that a higher number of terms in the model, increases the accu- racy, but additionally it has the unwanted e®ect of increasing the computational complexity and memory requirement as well. An additional goal, therefore, is to solve the optimization problem of obtaining a model by maximizing the accuracy and minimizing the number of terms. Several modeling techniques are compared in this study, especially those based on matrix pencil methods. Some techniques for optimizing their performance have also been suggested. The pros and cons of each method are also discussed. It is shown that using the suggested techniques provides us with better models, but some pointers are also provided towards investigating more viable alternatives.
Benzer Tezler
- Model,ng of helically applied current to the inductively coupled radio frequency plasma torch in two dimensions
İki boytta burgusal akımlı bağlaşımlı radyo frekanslı plazma alev meşalesi (TORCH) modellemesi
MEHMET CANTÜRK
Doktora
İngilizce
2004
Fizik ve Fizik MühendisliğiOrta Doğu Teknik ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. SİNAN BİLİKMEN
- Taksim Cumhuriyet Meydanı örneğinde fotogrametri ve lazer tarama verileriyle bütünleşik 3B kent modeli üretimi
Producing 3D city model with the combined photogrammetric and laser scanner data in the example of Taksim Cumhuriyet Square
CUMHUR ŞAHİN
Doktora
Türkçe
2011
Jeodezi ve FotogrametriYıldız Teknik ÜniversitesiHarita Mühendisliği Ana Bilim Dalı
PROF. DR. AYHAN ALKIŞ
- Uydu görüntülerinden 3. boyut bilgisinin çıkarılması
Estimating third dimension data from sar images
ÖZKAN EREN
Yüksek Lisans
Türkçe
2009
Jeodezi ve Fotogrametriİstanbul Teknik ÜniversitesiUydu Haberleşmesi ve Uzaktan Algılama Ana Bilim Dalı
YRD. DOÇ. DR. M. ZEKİ COŞKUN
- Origami tabanlı eklem tasarımı ve tasarımın nümerik ve deneysel analizi
Numerical and experimental analysis of A novel origami robotics based hinge design
BÜŞRA DALKILINÇ
Yüksek Lisans
Türkçe
2018
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. ZEKİ YAĞIZ BAYRAKTAROĞLU
- Design and deployment of deep learning based fuzzy logicsystems
Derin öğrenme tabanlı bulanık sistemlerin geliştirilmesi ve uygulanması
AYKUT BEKE
Doktora
İngilizce
2023
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
DOÇ. DR. TUFAN KUMBASAR