Statik itme (pushover) yöntemi kulanılarak yapıların analizi
The analysis of the structures with the use of static pushover method
- Tez No: 212275
- Danışmanlar: YRD. DOÇ. DR. M. ZEKİ ÖZYURT
- Tez Türü: Yüksek Lisans
- Konular: Deprem Mühendisliği, İnşaat Mühendisliği, Earthquake Engineering, Civil Engineering
- Anahtar Kelimeler: Pushover Analiz, Kapasite Egrisi, Kapasite Spektrumu, Nonlineer Statik Analiz, Performans Metodu, Statik tme Yöntemi
- Yıl: 2007
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Yapı Bilim Dalı
- Sayfa Sayısı: 102
Özet
Özet yok.
Özet (Çeviri)
Keywords : Pushover analyse, capacity curve, capacity spectrum, nonlinear static analyse, performance method, static pushover method In this research, the pushover analyse, in the concrete structural systems resulting in more realistic analyses and in nonlinear analyse methods has been examined. By using this method, the behaviour of the buildings against the earthquake forces has been considered, the quake safety verification and the reinforcement of the buildings which show unsafety from the point of view of resistance against the quake forces has been explained. Although by using ?static pushover analyse?, the verification of the resistance against the earthquake forces of the present building has been done and its reinforced situation?s performance results has been considered. This research is represented in five chapters, the first chapter includes the aim of this research, introduction the issue and it?s emphasize Chapter 2 contains the performance concept for the buildings, structural and nonstructural performance levels and in the determination of these levels effective in defining criteria are explained. The ground movements are also referred. In the chapter 3, analyse by using pushover method, obtain of the capacity curve of the building, capacity spectrum method and how the performance can be achieved are presented. In chapter 4, five storied present building is analysed by using the STAD4-CAD software according to the TDY respectively 1975 and 1998 version and another analyse has been applicated to the reinforced type of the same building. In the last chapter analyse outcomes are compared and general lookover has been done.
Benzer Tezler
- Mevcut bir yapının statik itme analizi (pushover) yöntemi ile güçlendirme performansının değerlendirilmesi
The analyses of the structures with the use of static pushover method
HAKAN ÇELİK
Yüksek Lisans
Türkçe
2009
İnşaat MühendisliğiSakarya Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NECATİ MERT
- Mevcut çok katlı yapının statik itme (pushover) yöntemi ile analizi
The analyses of the structures with the use of static pushover method
ALİ BOZAN
Yüksek Lisans
Türkçe
2008
İnşaat MühendisliğiSakarya Üniversitesiİnşaat Mühendisliği Bölümü
YRD. DOÇ. DR. M.ZEKİ ÖZYURT
- Statik itme (pushover) yöntemiyle mevcut bir yapının güvenliğinin belirlenmesi
Determination of the seismic safety of an existing structure by pushover analysis method
DENİZ CAN
Yüksek Lisans
Türkçe
2005
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF.DR. MELİKE ALTAN
- Prefabrike çelik uzay kafes çatı sistemli büyük açıklıklı yapıların sismik performansı
Seismic performance of large span structures with prefabricated steel space truss roof system
ZÜLEYHA ÖZGÜR
Yüksek Lisans
Türkçe
2006
İnşaat MühendisliğiSüleyman Demirel Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
Y.DOÇ.DR. ZEKİ AY
- Statik itme (pushover) yöntemi ile çapraz elemanlı betonarme çerçevelerin performans seviyelerinin belirlenmesi
Performance evaluation of braced RC frames with pushover analysis
ATACAN ATALAR
Yüksek Lisans
Türkçe
2005
İnşaat MühendisliğiKaradeniz Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF.DR. ALEMDAR BAYRAKTAR