Betonarme yapıların kolon-kiriş birleşim bölgelerinin deprem performanslarının incelenmesi
Seismic behaviour of beam-column joints of reinforced concrete structures
- Tez No: 222359
- Danışmanlar: DOÇ.DR. ALPER İLKİ
- Tez Türü: Yüksek Lisans
- Konular: Deprem Mühendisliği, İnşaat Mühendisliği, Earthquake Engineering, Civil Engineering
- Anahtar Kelimeler: Kolon-Kiris Birlesim Bölgesi, Enine Kiris, Döseme, Column-Beam Joint, Transverse beam, Slab
- Yıl: 2007
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Deprem Mühendisliği Bilim Dalı
- Sayfa Sayısı: 109
Özet
Bu çalısma kapsamında 2 adet birlesim bölgesinde etriye bulunmayan numuneler üretilmistir. Numunelerden biri kolon, kiris, enine kiris ve döseme detayı içerirken, digeri sadece kolon ve kiristen olusacak sekilde tasarlanmıstır. iki numune arasındaki belirleyici parametre enine kiris ve dösemenin etkisi olarak belirlenmistir. Her iki numuneye de %12.5 (114 kN) eksenel yük verilmis ve belirli yerdegistirme adımları kullanılarak deneyler yerdegistirme kontrollü olarak yapılmıstır. Deneylerde, sıyrılma ve kesme etkilerinin beraber ortaya çıkmasıyla birlikte numunelerin göçme durumuna ulastıkları gözlemlenmistir. Enine kiris ve döseme detayı bulunan numune digerine oranla daha fazla yük tasımıs ve enerji sönümlemistir. Enine kiris ve dösemenin olması birlesim bölgesindeki çatlak genisliklerinin diger numuneye göre daha küçük olmasına etken olmustur. Deney sonuçları, ilgili yönetmeliklerin vermis oldugu beton tarafından karsılanan (çekme ve basınçta) kesme kuvvetinin sınır degerleri ile karsılastırılmıstır.
Özet (Çeviri)
In this study, two specimens have been produced without using stirrups in the joint section. While one of the specimens involves column, beam, transverse beam and slab details, the latter is only composed of column and beam sections. The determining factor for these two specimens has been stated as the effect of transverse beam and slab sections on the behavior of the specimen. %12.5 (114 kN) of the bearing capacity of the column section has been applied to both specimens as the axial force and using specific displacement steps the experiments have been held displacement controlled. In the experiments, it is observed that the specimens have reached the failure mechanism with arise of slipping and shear effects together. The specimen with transverse beam and slab section bared more load and absorbed more energy than the other specimen. Transverse beam and slab caused the crack sizes in the joint to be smaller than the ones in the other specimen. Experimental results are compared to limit values of shear force, countered by concrete (in compression and tension), proposed by pertinent codes.
Benzer Tezler
- Düşük dayanımlı betonarme yapılarda kolon-kiriş birleşim bölgelerinin deprem performansının deneysel olarak incelenmesi
Experimental investigation on the seismic performance of beam-column joints in low-strength reinforced concrete structures
ATAKAN MANGIR
Doktora
Türkçe
2018
İnşaat Mühendisliğiİstanbul Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. TURGAY ÇOŞGUN
- Improvement of the cyclic flexural capacity of RC columns with FRP reinforcement
Lifli polimer donatılar kullanılarak betonarme kolonların çevrimsel yükler altında eğilme kapasitelerinin artırılması
ENGİN CÜNEYT SEYHAN
Doktora
İngilizce
2016
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ALPER İLKİ
- İki yönlü tekrarlı yüklemeler altındaki betonarme kenar kolon-kiriş birleşimlerinde çelik tel takviyeli betonun kullanıldığı etkili bölgenin araştırılması
An Experimental study on the effective zone of the steel fiber reinforced concrete used in exterior beam-column connections subjected to bi-directional reversals cyclie loadings
MUSTAFA GENÇOĞLU
- Betonarme yapılarda oluşan soğuk derzlerin birleşim bölgelerinin dayanımına ve sünekliğine olan etkisinin incelenmesi
Investigation of the effect of cold joints on the strength and ductility of the joints in reinforced concrete buildings
İSMET AYMAK
Yüksek Lisans
Türkçe
2020
İnşaat MühendisliğiBursa Uludağ Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SERKAN SAĞIROĞLU
- Betonarme çerçevelerin farklı histeretik modeller kullanarak çözümlenmesi
Analysis of reinforced concrete frames using different histeretic models
MELİS TAŞKIN
Yüksek Lisans
Türkçe
2013
İnşaat MühendisliğiKocaeli Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. FUAD OKAY