Elektrokimyasal olarak oluşturulacak polianilin kaplama ve nikel kaplama üzerine polianilin kaplamanın 304 çeliğin korozyon davranışına etkisinin incelenmesi
The investigation of effect of polyaniline coating synthezed as electrochemical and the investigaton of the effect of poly aniline coating on nickel on 304 steel corrosion behaviour
- Tez No: 238313
- Danışmanlar: YRD. DOÇ. DR. AYSEL BÜYÜKSAĞİŞ
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2009
- Dil: Türkçe
- Üniversite: Afyon Kocatepe Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 113
Özet
Bu çalışmanın amacı; 304 çeliğin korozyon karakteristiklerini Tafel ekstrapolasyonu, lineer polarizasyon ve elektrokimyasal impedans yöntemleri ile belirlemektir. İletken polimer olan polianilin (PANI) elektrokimyasal siklik voltametri yöntemiyle çelik yüzeyinde sentezlenmiştir. Watt banyosu kullanılarak çelik yüzeyi elektrokimyasal olarak nikel ile kaplanmıştır. Ek olarak nikel kaplı çelik elektrot üzerine elektrokimyasal siklik voltametri yöntemiyle PANI sentezlenmiştir. Tekli ve ikili kaplamaların çeliğin korozyon direnci üzerine etkisi 0, 48, 120 ve 168 saatlik zaman dilimlerinde % 3,5 NaCI, 1 N NaOH ve 1 N HCI ortamlarında incelenmiştir. Kaplamasız, PANI, Ni + PANI kaplı çeliğin yüzey morfolojisi SEM-EDX ile incelenmiştir. Yüzeyde sentezlenen polianilin FTIR spektrumu kullanılarak analiz edilmiştir. Yüzeyde oluşan film kalınlıkları optik mikrometre ile ölçülmüştür. Çiftli kaplama (Ni + PANI ), tekli kaplama (PANI)' ya göre daha iyi korozyon direnci göstermiştir. 0,3 M okzalik asit + 0,1 M anilin ortamında elde edilen siklik voltamogramlar çelik yüzeyinde PANI kaplandığını göstermiştir. PANI'nin oluşum reaksiyonu otokataliktir. PANI çelik yüzeyinde oksit oluşumunu desteklemektedir. 1 N NaOH ve 1 N HCI ortamlarında Ni+PANI kaplama, PANI kaplamaya göre daha iyi korozyon direnci göstermiştir. % 3,5 NaCl ortamında ise PANI kaplama 48 saat ve 120 saatte, Ni+PANI kaplamaya göre daha iyi korozyon direnci göstermiştir. Ni+PANI kaplama ise 0 ve 168 saatte PANI kaplamaya göre daha iyi korozyon direnci göstermiştir. 1 N HCl ve 1 N NaOH ortamlarında Ni+PANI kaplı çeliğin korozyon akımı PANI kaplamanın korozyon akımından küçüktür. 1 N NaOH ortamında PANI kaplı çelikte korozyon akımı zamanla azalmıştır. SEM-EDX analizleri Ni+PANI kaplı yüzeyin daha homojen ve gözeneksiz olduğunu göstermiştir. Bu elektrokimyasal deney sonuçları ile de uyumludur.
Özet (Çeviri)
The aim of this study is to determine the corrosion characteristics of 304 steel by the methods of Tafel extrapolation, linear polarization and electrochemical impedance spectroscopy (EIS). The polyaniline (PANI), which is a conductive polymer, is synthesized on the steel surface by the way of electrochemical cyclic voltammetry method. The steel surface is covered with nickel as electrochemical Watt?s bath. Additionally, PANI is synthesized on the steel electrode covered with nickel by the method of electrochemical cyclic voltammetry method. The effect of single and double coats of steel on corrosion resistance is examined in 3.5 % NaCl, 1 N NaOH and 1 N HCl solutions for the time zone of 0, 48, 120 and 168 hours. The surface morphology of steel, which is uncovered, is examined by SEM-EDX and the PANI one is also examined in the same way. And the one covered with Ni + PANI is examined in the same way too. The synthesized polyaniline on the surface is analyzed by FTIR spectrum. The film thickness occurred on the surface is measured by optic micrometer. Double coatings (Ni + PANI) has showed better corrosion resistance than single coating (PANI). The cyclic voltammograms obtained in 0,3 M oxalic acid + 0,1 M aniline solution shows that there is PANI coat on steel surface. The reaction occurrence of PANI is autocatalytic. PANI supports the oxide formation on the steel surface. Ni+PANI coatings in 1 N NaOH and 1 N HCl solutions has showed better corrosion resistance than PANI coating. On the other hand, PANI coating in 3.5% NaCl solution has revealed better corrosion resistance than Ni+PANI coatings for 48 and 120 hours. However, Ni+PANI coatings has showed better resistance than PANI coating for 0 and 168 hours. The corrosion current of the steel covered with Ni+PANI in 1 N HCl and 1 N NaOH solutions is lower than the corrosion current of PANI coating. The corrosion current in the steel covered with PANI in 1 N NaOH solution has decreased in the course of time. SEM-EDX analyses have showed that the surface covered with Ni+PANI is more homogenous and compact. This result is also convenient with the electrochemical experiment results.
Benzer Tezler
- Corrosion prevention of carbon steel and aluminium metals by PANI/CeO2 nanocomposite coatings
PANI/CeO2 nanokompozit kaplamalar ile karbon çelik ve alüminyum metallerinin korozyonunun önlenmesi
HANDE YOLSAL ACAR
Yüksek Lisans
İngilizce
2015
Kimyaİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. ESMA SEZER
- Polipirol, polianilin, polietilendioksitiyofen içeren tabakalı elektrokromik cihaz (ECD) üretimi ve özelliklerinin araştırılması
Production of laminal electrochromic devices (ECDs) containing polypyrrole, polyaniline, polyethylenedioxythiophene and investigation their properties
UFUK ABACI
Doktora
Türkçe
2013
Fizik ve Fizik MühendisliğiKocaeli ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. H. YÜKSEL GÜNEY
- N-substituye karbazollerin endüstriyel metallerin korozyonunu önlemedeki etkileri
Corrosion inhibition effect of N-substituted carbazole on the corrosion of some industrial metals
SADIK ÖZTÜRK
- Elektrokimyasal olarak oluşturulacak polianilin (PANI) kaplamanın demirli malzemelerin korozyon davranışları üzerine etkilerinin incelenmesi
Electrochemical synthesis and corrosion performance of polyaniline (PANI)coating on iron substrates
ALİ TUNCAY ÖZYILMAZ
- Ultramikroelektrot (UME) hazırlanması ve uygulamaları
Preparation of ultramicroelectrode and its applications
GÜNEŞ EROĞLU