Geri Dön

Ön gerilmeli anizotrop levha ve ön gerilmeli anizotrop yarı düzlemden oluşan sistemin titreşimli hareketli yük etkisindeki dinamik davranışı

Dynamics of a system comprising a pre-stressed orthotropic layer and pre-stressed orthotropic half-plane under the action of an oscillating moving load

  1. Tez No: 244043
  2. Yazar: NİHAT İLHAN
  3. Danışmanlar: PROF. DR. SURKAY AKBAROV
  4. Tez Türü: Doktora
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2008
  8. Dil: Türkçe
  9. Üniversite: Yıldız Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 86

Özet

Tezde ön gerilmeli anizotrop levha ve ön gerilmeli anizotrop yarı düzlemden oluşan sistemin zamana göre harmonik değişen hareketli yük etkisindeki dinamik davranışı düzlem şekil değiştirme halinde parçalı homojen cisim modeli çerçevesinde, Ön Gerilmeli Ortamlarda Dalga Yayılımının Üç Boyutlu Doğrusallaştırılmış Teorisi (ÖODYÜT) uygulanarak incelenmiştir. Sabit hızla hareket eden yük örtü tabakasının üst yüzeyinden sisteme etki etmektedir. Söz konusu problemin çözümü hareketli yükün subsonik hız sınırları altında, örtü tabakası ve yarı sonsuz ortam arasındaki düzlemde tam temas ve tam olmayan temas koşulları için yapılmıştır.Sayısal sonuçlar yükün hareket doğrultusundaki örtü tabakasının elastisite modülü yarı sonsuz ortamın elastisite modülünden daha büyük olması durumu için elde edilmiştir. Malzeme parametrelerinin, yükün titreşim frekansının, ön gerilmenin; kritik hız ve gerilme yayılımına etkisine ait sayısal sonuçlar verilmiş ve mühendislik açısından yorumlanmıştır.Kritik hızın yarı sonsuz ortamın Rayleigh dalgası hızına yakın değerler aldığı ve örtü tabakasındaki ön gerilmenin bu değerleri arttırdığı görülmüştür. Ayrıca hareketli yükün titreşim frekansının kritik hız değerlerini azalttığı tespit edilmiştir.

Özet (Çeviri)

This thesis investigates the dynamic response to a time-harmonic oscillating moving load of a system comprising an initially stressed covering layer and initially stressed half-plane, within the scope of the piecewise-homogeneous body model utilizing Three-Dimensional Linearized Theory of Elastic Waves in Initially Stressed Body (TLTEWISB). It is assumed that the materials of the layer and half-plane are anisotropic (orthotropic), and that the velocity of the line-located time-harmonic oscillating moving load is constant as it acts on the free face of the covering layer. Our investigations were carried out for a two-dimensional problem (plane-strain state) under subsonic velocity for a moving load in complete and incomplete contact conditions.The corresponding numerical results were obtained for the stiffer layer and soft half-plane system in which the modulus of elasticity of the covering layer material (for the moving direction of the load) is greater than that of the half-plane material. The effects of the oscillating frequency of the moving load, initial stress and mechanical properties of the materials on the critical velocity and stress distribution are investigated.In particular, it was established that the critical velocity of the moving load is controlled mainly with a Rayleigh wave speed of a half-plane material and the initial stretching of the covering layer causes these values to increase. Moreover, it was established that with the oscillating frequency of the moving load, the values of the critical velocity decrease.

Benzer Tezler

  1. Tectonic and magmatic structure of Lake Van basin and its structural evolution, Eastern Anatolia accretionary complex (EAAC), East-Turkey

    Van Gölü havzasının tektonik ve magmatik yapısı ve yapısal evrimi, Doğu Anadolu yığışım karmaşığı (DAYK), Doğu Türkiye

    MUSTAFA TOKER

    Doktora

    İngilizce

    İngilizce

    2011

    Jeofizik Mühendisliğiİstanbul Teknik Üniversitesi

    İklim ve Deniz Bilimleri Ana Bilim Dalı

    PROF. DR. A. M. CELAL ŞENGÖR

  2. Investigation of the effect of heat treatments on the formability of the 6061 Al alloy

    Isıl işlemlerin 6061 Al alaşımının şekillendirilebilirliğineetkisinin incelenmesi

    RAŞİD AHMED YILDIZ

    Doktora

    İngilizce

    İngilizce

    2019

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ŞAFAK YILMAZ

  3. Crustal properties in Western Anatolia and Aegean sea revealed by joint inversion of p-receiver functions and P-wave polarisations

    Batı Anadolu ve Ege denizinin kabuk yapısının p dalgası alıcı fonksiyonları ve polarize P dalgalarının birlikte ters çözümü ile incelenmesi

    GÜNİZ BÜŞRA YALÇIN

    Yüksek Lisans

    İngilizce

    İngilizce

    2020

    Jeofizik Mühendisliğiİstanbul Teknik Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. TUNA EKEN

  4. Investigation of mantle kinematics beneath Turkey and adjacent regions based on seismological and numerical modelling

    Türkiye ve yakın çevresinin altında kalan üst mantonun kinematik özelliklerinin sısmolojik ve sayıssal model ve gözlemlerile incelenmesi

    JUDITH MARIA CONFAL

    Doktora

    İngilizce

    İngilizce

    2020

    Jeofizik Mühendisliğiİstanbul Teknik Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    PROF. DR. TUNCAY TAYMAZ

  5. Çatlak içeren ön gerilmeli şeritte çatlak ucunda oluşan gerilme şiddeti faktörünün belirlenmesi

    The determination of the stress intensity factor at the crack tips in an initial stretched strip

    ARZU TURAN

    Doktora

    Türkçe

    Türkçe

    2005

    MatematikYıldız Teknik Üniversitesi

    Matematik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. NAZMİYE YAHNİOĞLU