Geri Dön

Sol-gel yöntemi ile ZnO kuantum noktalarının sentezlenmesi ve karakterizasyonu

Syntesis and characterisation of ZnO quantum dots by sol-gel method

  1. Tez No: 254965
  2. Yazar: BÜLENT COMBA
  3. Danışmanlar: DOÇ. DR. AYŞE EROL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilim ve Teknoloji, Fizik ve Fizik Mühendisliği, Science and Technology, Physics and Physics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2009
  8. Dil: Türkçe
  9. Üniversite: İstanbul Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Fizik Ana Bilim Dalı
  12. Bilim Dalı: Katıhal Fiziği Bilim Dalı
  13. Sayfa Sayısı: 101

Özet

Bu çalışmada ZnO (çinko oksit) kuantum noktaları, kristal nanoyapı üretim yöntemlerinden biri olan sol-gel yöntemi ile sentezlenmiştir. Elde edilen ZnO nanoyapıların (kuantum noktalarının) morfolojisi Taramalı Elektron Mikroskobu (Scanning Electron Microscopy, SEM), kristal yapısı X-Işını Kırınımı (X-Ray Diffraction, XRD) ve bileşimi Enerji Dağılım Spektroskopisi (Energy Dispersive Spectroscopy, EDS) ölçümleri ile incelenmiştir.ZnO kuantum noktalarının optiksel özellikleri Fotoışıma yöntemi kullanılarak incelenmiştir. ZnO nanoyapıların sensör özelliklerinin araştırılmasında Kuartz Kristal Mikrobalans (Quartz Crystal Microbalance, QCM) tekniği kullanılmıştır. Ayrıca sentezlenen ZnO nanoyapılardan üretilen nem sensörünün değişken nem ortamındaki sensivitesi, elektriksel direnç değişikliğine bağlı olarak incelenmiştir.Sonuç olarak ZnO kuantum noktalarının sol-gel metoduyla sentezlenip potansiyel bir nem sensörü olarak kullanılabileceği gösterilmiştir.

Özet (Çeviri)

In this study, the quantum dots of ZnO (zinc oxide) have been synthesized by using the sol-gel method which is one of the producing methods of nanostructures. By measuring of; (1) Scanning Electron Microscopy (SEM), the morphology of ZnO nanostructures (quantum dots) gotten, (2) X-Ray Diffraction (XRD), their crystal structure, (3) Energy Dispersive Spectroscopy (EDS), its? combination have been researched.The optical characteristic of the ZnO quantum dots have been researched by using photoluminescence spectroscopy. During the investigation of the sensor characteristics of ZnO nanostructures and the research of adsorption kinetic, the method of Quartz Crystal Microbalance (QCM) has been used. Apart from this, sensor characteristics of synthesized ZnO nanostructures, as a dependent upon the changes of electrical resistance, have been researched in the humidity circumstance.Consequently, it is showed that the ZnO quantum dots can be used as a potential humidity sensor, synthesizing by using sol ? gel method.

Benzer Tezler

  1. Neodiyum (Nd+3) iyonu ile katkili silisyum oksit (SiO2 ) camlarinin mikro-yapi ve optik özelliklerine ZnSe kuantum noktalarinin etkisi

    The effect of neodymium ion (Nd3+) doped silisyum dioxide (SiO2) glasses on the micro-structure and optical properties of ZnSe quantum dots

    THAMİ ELBOUKHARİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Fizik ve Fizik Mühendisliğiİstanbul Teknik Üniversitesi

    Fizik Mühendisliği Ana Bilim Dalı

    PROF. DR. GÖNÜL ÖZEN

  2. Structural and magnetic properties of Co doped ZnO films

    Co katkılı ZnO filmerin yapısal ve manyetik özellkilerinin incelenmesi

    MÜNEVVER ÇAKIROĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2008

    Metalurji MühendisliğiMarmara Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. LÜTFİ ARDA

    YRD. DOÇ. DR. SEVAL GENÇ

  3. NiO/ZnO ve NiO/ZnO/Al2O3 nanokompozit partiküllerinin ultrasonik sprey piroliz (USP) yöntemiyle üretimi

    Production of NiO/ZnO and NiO/ZnO/Al2O3 nanocomposite particles by ultrasonic spray pyrolysis (USP) technique

    DUYGU YEŞİLTEPE

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. SEBAHATTİN GÜRMEN

  4. Bakır/gümüş/çinko oksit (CuAg/ZnO) partiküllerinin ultrasonik sprey piroliz yöntemiyle üretimi

    Production of CuAg/ZnO nanocomposite particles by ultrasonic sprey pyrolysis

    TOLGA ÇAKMAK

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. SEBAHATTİN GÜRMEN

  5. Ni/ZnO nanokompozit partiküllerinin ultrasonik sprey piroliz tekniğiyle üretimi

    Production of Ni/ZnO nanocomposite particles via ultrasonic spray pyrolysis (USP) method

    İLAYDA KOÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2013

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    İleri Teknolojiler Ana Bilim Dalı

    PROF. DR. SEBAHATTİN GÜRMEN