Bir endüstriyel kurutucunun performansının enerji ve ekserji yöntemi kullanarak belirlenmesi
Determination of an industrial dryer's performance with using energy and exergy method
- Tez No: 255529
- Danışmanlar: DR. ZAFER UTLU, PROF. DR. ARİF HEPBAŞLI
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2009
- Dil: Türkçe
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 157
Özet
Kurutma endüstrisinde, istenilen özelliklere sahip kuru ürün elde etmek için maksimum düzeydeki suyun minimum enerji kullanımı ile uzaklaştırması amaçlanır. Ekserji analizi, son yıllarda, değişik ısıl sistemlerin tasarımı, işletilmesi ve performansının değerlendirmesinde yaygın olarak kullanılmaktadır. Bunlar arasında, enerji yoğun bir işlem olan kurutma büyük önem taşır. Bu tezde, gerçek işletme verisi kullanılarak, İzmir'de bulunan, yıllık üretim kapasitesi 24 milyon m2 olan bir seramik tesisinin enerji ve ekserji analizleri yapıldı. Kurutma sistemi, üç aşamada analiz edildi. 22 oC'lik bir referans (ölü hal) sıcaklığında sistemin her bileşeninin ve tüm sistemin ekserji yok oluşu ve verim değerleri hesaplandı. 2009 yılının Ocak ay'ı için, püskürtmeli (spray) kurutucunun enerji ve ekserji verimleri, sırasıyla, % 65,5 ve % 53,7 olarak bulundu. Dikey kurutucunun enerji verimi ise, % 39 olarak elde edildi.
Özet (Çeviri)
In the drying industry, it is aimed at utilizing a minimum amount of energy in order to remove the maximum moisture for the desired final conditions of the product. In the recent years, exergy analysis has been widely used in the design, operation and performance assessment of various thermal systems. Among these, drying, which is an energy intensive operation, is of a great importance. In this thesis, energy and exergy analyses of a ceramic plant, located in Izmir, with a yearly production capacity of 24 million m2 were performed using the actual operational data. Drying system was analyzed at the three stages. The values for exergy destruction and efficiency were calculated for each component of the system and the whole systems at a reference (dead state) temperature of 22 oC. For the month of January 2009, energy and exergy efficiencies of the spray dryer was found to be 65.5% and 53.7%, respectively. The energy efficiency of the vertical dryer was obtained to be 39%.
Benzer Tezler
- Bir ısı pompalı çamaşır kurutma makinesinin enerji performansının incelenmesi ve iyileştirilmesi çalışmaları
Studies of research and improvements on energy consumption of a household laundry dryer with heat pump
UTKU BULGAN
Yüksek Lisans
Türkçe
2014
Enerjiİstanbul Teknik ÜniversitesiEnerji Bilim ve Teknoloji Ana Bilim Dalı
YRD. DOÇ. DR. MURAT ÇAKAN
- Hibrit (güneş paneli / rüzgar türbini) enerji sistemi destekli endüstriyel tip bir kurutucunun tasarımı ve performansı
Design and performance of a hybrid (solar panel / wind turbine) energy system assisted industrial type dryer
ONUR TAŞKIN
Doktora
Türkçe
2018
EnerjiBursa Uludağ ÜniversitesiBiyosistem Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ VARDAR
DOÇ. DR. NAZMİ İZLİ
- Tokat ilinde güneş enerji destekli ısı pompalı bir kurutucu sistem geliştirilmesi ve domates kurutma performansının farklı kurutma sistemleri ile karşılaştırılması
Desing of solar assisted heat pump dryer system in Tokat and a comparison of different drying systems on tomato drying
HAKAN POLATCI
- Endüstriyel tip kurutucuda kurutma karakteristiğinin belirlenmesi ve modellenmesi
Determination and modelling of drying characteristic in industrial type dryer
AHMET ERHAN AKAN
Doktora
Türkçe
2018
Makine MühendisliğiYıldız Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. DERYA BURCU ÖZKAN
- Hamile ratlarda oksidatif strese neden olan radyasyona karşı kolemanitli betonun koruyucu etkisinin araştırılması
An investigation of protective effect of concrete with colemanite on the radiation-induced oxidative stress in pregnant rats
OSMAN GENÇEL
Doktora
Türkçe
2009
İnşaat MühendisliğiSüleyman Demirel Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA NAZIROĞLU
PROF. DR. MÜMİN FİLİZ