Geri Dön

Farklı agregalı betonların mekanik özelliklerine yüksek sıcaklığın etkisi

Effect of the temperature on mechanical properties of concrete which is prepared by different types of aggregates

  1. Tez No: 259287
  2. Yazar: SERHAT AY
  3. Danışmanlar: DOÇ. DR. SALİH YAZICIOĞLU
  4. Tez Türü: Yüksek Lisans
  5. Konular: Teknik Eğitim, İnşaat Mühendisliği, Technical Education, Civil Engineering
  6. Anahtar Kelimeler: Basınç Dayanımı, Yüksek Sıcaklık, Beton, Farklı Agrega, Çekip Çıkarma, Compressive Strength, High Temperature, Concrete, Different aggregates, Pull-Out
  7. Yıl: 2010
  8. Dil: Türkçe
  9. Üniversite: Fırat Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Yapı Eğitimi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 93

Özet

Beton, yanıcı bir malzeme olmamasına karşın yüksek sıcaklıklar sonrasında değişik davranışlar göstermektedir. Beton hacminin önemli bir kısmını oluşturan agregaların özelliklerindeki farklılıklar ısıtma sırasında betonun performansını önemli derecede etkiler. Bu özelliklerindeki farklılıklardan dolayı betonda çatlama ve parça atmalar gözlenirken aderansta önemli kayıplar oluşmaktadır. Bu sebeple yüksek sıcaklık betonu her zaman tehdit edebilecek bir etkendir ve yüksek sıcaklığın betona verdiği zararları en aza indirgemek için çalışmalar yapılmaktadır.Bu çalışmada, farklı agrega tipleriyle hazırlanan beton numunelere yüksek sıcaklığın etkisi araştırılmıştır. Bu amaçla CEM ? 42,5 N tipi Portland Çimentosu ve 4 farklı tip agrega (Bazaltik kırma taş, Dere agregası, Pomza, Kireçtaşı) içeren betonlar hazırlanmıştır. Belirlenen yaşa gelen (28 gün) numuneler sırasıyla 3000 C, 6000 C ve 9000 C sıcaklıklara tabi tutulmuştur. Bu sıcaklıklara maruz kalan beton numunelerin basınç dayanımlarına, ultrases geçiş hızlarına ve aderans dayanımına bakılmıştır.Yapılan çalışmaların sonucunda yüksek sıcaklığın etkisinde kalan farklı tip agregalarla hazırlanmış betonlarda basınca en dayanıklı olanın bazaltik kırmataş olduğu, en az dayanımında hafif agregayla hazırlanmış olan betonda olduğu görülmüştür. Aynı zamanda hazırlanan beton numunelerde çekip-çıkarma (pull-out) deneyi yapılmış ve sıcaklık arttıkça beton ile donatı arasındaki aderans kuvvetinin azaldığı görülmüştür.

Özet (Çeviri)

Concrete shows different behaviours after the higher temperatures in dispite of it isn?t flammable. Differences in the properties of aggregates which are made up a significant portion of the volume of concrete affect significantly performance of concrete. As cracking and splitting in concrete are being observed due to differences in the properties, it is also made up significant loses in adherence. Because of this reason, it is a factor that may threaten to concrete at high temperature and studies are done to minimize damages to concrete of high temparature.In this study, the effect of high temperature to the concrete specimens prepared with different types of aggregates are investigated. For this purpose, it is prepared mortars containing Portland cement CEM ? 42.5 and four different types of aggregates (basaltic stone crushing, river aggregate, pumice, limestone).The samples in wet determined are respectively subjected to 3000 C, 6000 C and 9000 C temperature. It is investigated to adherence strength, switching speed of ultrasound and compressive strength of concrete specimens exposed to this temperature.As a result of study done, It has been observed that the basaltic stone crushing is the most resistant to pressure in concretes and the concrete prepared by lightweight aggregate is the minimum resistant to pressure. At the same time, the pull-out of concrete test has been done in the concrete samples prepared and it has been seen decreasing of the adhesion force that is between concrete and matrix with increasing temperature.

Benzer Tezler

  1. Recycled aggregate concrete at elevated temperatures

    Geri kazanılmış agregalı betonların yüksek sıcaklıktaki özellikleri

    BÜLENT ÇELİK

    Doktora

    İngilizce

    İngilizce

    2007

    İnşaat MühendisliğiBoğaziçi Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF.DR. TURAN ÖZTURAN

  2. Pasinler ? Demirdöven pomzası ile üretilen hafif betonların mekanik özelliklerine atmosferik basınçlı buhar kürünün etkisi

    Effect of atmospheric pressure steam curing to mecanical properties of lightweight concrete produced with Pasinler ? Demirdöven pumice

    TÜRKAY KOTAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2009

    İnşaat MühendisliğiAtatürk Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. RÜSTEM GÜL

  3. Hafif ve normal agregalı betonların fiziksel ve mekanik özellikleri üzerine farklı kür koşullarının etkisi

    The influence of different curing conditions on the physical and mechanical properties of lightweight and normal aggregate concrete

    OSMAN GEÇTEN

    Doktora

    Türkçe

    Türkçe

    2005

    İnşaat MühendisliğiAtatürk Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF.DR. RÜSTEM GÜL

  4. Kendiliğinden yerleşen betonlara çimento tipi ve atmosferik buhar kürü çevrimlerinin etkisi

    The effect of cement type and the atmospheric steam curing cycles on the properties of variable types self compacting concrete

    MUHAMMED SAİD GÜL

    Yüksek Lisans

    Türkçe

    Türkçe

    2011

    İnşaat MühendisliğiAtatürk Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. ABDULKADİR CÜNEYT AYDIN

  5. Taze halde soğuk havaya maruz hafif betonların fiziksel ve mekanik özelliklerinin incelenmesi

    Investigation of physical and mechanical properties of fresh lightweight concretes subjected to cold weather

    AHMET YOLCU

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    İnşaat MühendisliğiGümüşhane Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ÖZLEM ÇAVDAR