Mandibular implant destekli hareketli protezlerde implant sayısı ve tutucu türünün kemikteki stres dağılımlarına etkisinin sonlu elemanlar analizi ile incelenmesi
The evaluation of the effect of number of implants and type of attachment on the stress distribution in bone: a finite element analysis
- Tez No: 281717
- Danışmanlar: PROF. DR. ÖMER KUTAY
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2010
- Dil: Türkçe
- Üniversite: İstanbul Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 244
Özet
Günümüzde dişsiz alt çenelerde kullanılan hareketli protezlerde tutucu olarak en sık bar veya top başlı tutucular kullanılmaktadır. Bu çalışmanın amacı, implant üstü hareketli protezler için kuvvet dağılımı açısından en elverişli tutucu türünü ve en uygun implant sayısını belirlemektir. Bu çalışmada dişsiz alt çene kemiğinde interforaminal bölgede farklı sayıda implant ve iki farklı tutucu türü ile oluşan gerilmeler incelendi.Çalışmada %10'uk formalinde bekletilmiş bir kadavradan alt çene diseke edilerek çıkarıldıktan sonra 3 boyutlu dental volumetrik tomografi alındı. Strain gage analizi için interforaminal bölgeye 5 adet implant yerleştirildi. Destek kemik üzerine 16 adet rozet starin gage yapıştırıldı. Kondillerin rotasyon yapmasına ve alt çenenin horizontal hareketine izin veren özel bir düzenek hazırlandı. 4 farklı yükleme bölgesinden 100 N statik kuvvet uygulandı.Sonlu elemanlar yönteminde hazırlanan matematiksel modelde herhangi bir yerdeki sayısal değerlerin elde edilebilği, ancak verilerin hazırlanan modelin gerçeği taklit etme başarısıyla orantılı olarak klinik ve ağız içi koşullardan uzaklaşabileceği bilindiği için, bu çalışmada sonlu elemanlar analizi ile incelenen tüm durumlar strain gage analizi ile sınanarak daha güvenilir sonuçlar elde edilmeye çalışıldı.Sonuçlar ışığında kemikte en olumlu gerilme dağılımları 4 implantla desteklenen bar tutucuda ortaya çıkmıştır. Ancak tüm durumlarda gerilmeler açısından oluşan farkların çok büyük olmadığının altı çizilmelidir. Bu farkların klinik olarak önemi olup olmadığı uzun süreli takip çalışmalarıyla değerlendirilmelidir. Kemik yoğunluğu veya hacminin düşük olduğu durumlarda implantların kuvvetler karşısında olumsuz etkilenmemesi için hareketli protez desteği olarak 4 implant ve tutucu türü olarak bar tercih edilmesi tavsiye edilebilir.
Özet (Çeviri)
Implant overdentures can be supported with bar attachments as well as ball/O-ring abutments fixed on 2, 3 or 4 implants.Validation of biomechanical stress and strain measurements is important to gain reliable results. The comparison of strain gage analysis (SGA) results and finite element analysis (FEA) calculations, where mutual agreement and compatibility should be looked for, seems to be important for clinical implications. The aim of this study was to determine under in vitro conditions, the ideal attachment type and number of implants for implant overdenture support.The mandible of a formalin fixed human cadaver was involved in this in vitro strain gage measurement study. 6 different OVDs were tested: 2-implant, 3-implant or 4-implant supported bar OVDs and OVDs retained by 2, 3 or 4 retentive anchors. In the strain gage analysis the emerging stress under 100 N pressures was measured at 16 different sites. The measurements were repeated 6 times and statistical analysis was performed. The stress levels in the mandible caused by bite force loading for the same situations were calculated with finite element analysis too.The results indicate that the lowest stresses occur in the four implant bar retained situation. However, it should be pointed out that the emerging stresses in each situation are very close to each other and the results should be evaluated by clinical follow-up studies. In critical clinical cases with low bone density or volume, the use of 4 implants with a bar retention could be recommended for overdenture support.
Benzer Tezler
- Implant destekli hareketli protezlerde farklı tedavi seçeneklerinde meydana gelen komplikasyonların incelenmesi
Investigation of complications occuring in different treatment options in implantsupported removable prosthesis
EZGİ ERDENOL
Doktora
Türkçe
2023
Diş HekimliğiBaşkent ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. SELİM ERKUT
- İmplantüstü bar tutuculu protezlerde farklı malzemelerle güçlendirilen çeşitli akrilik kaide kalınlıklarının kırılma dayanımına etkisi
The effect of various acrylic denture base thicknesses, reinforcement materials and acrylic resin types on fracture strength in mandibular implant overdentures with bar attachment
SELEN TOKGÖZ
Doktora
Türkçe
2019
Diş Hekimliğiİstanbul ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. FATMA GÜLBAHAR IŞIK ÖZKOL
- Mandibular implant destekli overdenture protezlerde farklı tutucu sistemlerinin stres dağılımına etkisinin sonlu elemanlar analizi ile değerlendirilmesi
Evaluation of different attachment systems on stress distribution for implant supported mandibular overdenture prosthesis using finite element analysis
SHIRHAN HALILOV
Doktora
Türkçe
2020
Diş HekimliğiSelçuk ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. İSA YÖNDEM
- Alt çene tam ve kısmi dişsizlik vakalarında diş, implant ve diş - implant destekli hareketli protez uygulamalarında protetik yapılar ve çevre dokulardaki stres, gerinim ve yer değiştirmenin 3 boyutlu sonlu elemanlar stres analiz yöntemi ile değerlendirilmesi
Evaluation of prosthetic structures and mandibular tissues on total and partial edentulous patient treated with tooth, implant and implant-tooth supported removable overdenture prosthesis, by three dimensional finite element analysis
DENİZ DAĞLIK
Doktora
Türkçe
2012
Diş HekimliğiBaşkent ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. ALPER ÇAĞLAR
- Mandibuler implant tutuculu overdenture uygulamalarında, kısa implantların ve tutucu tiplerinin farklı kemik dansiteleri üzerinde oluşturacağı streslerin üç boyutlu sonlu elemanlar stres analiz yöntemi ile biyomekanik olarak incelenmesi
Biomechanical investigation of stress caused by short implants and retainer types on different bone densities in mandibular implant retained overdenture applications by THREE-dimensional finite element stress analysis method
GİZEM KILIÇ
Doktora
Türkçe
2022
Diş HekimliğiAnkara ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. SEMİH BERKSUN