Mikron altı bor karbür katkısının ve reaksiyon sinterlemenin bor karbür-titanyum diborür kompozitlerine etkilerinin incelenmesi
An investigation on the effects of sub micron boron carbide addition and reaction sintering to boron carbide-titanium diboride composites
- Tez No: 293905
- Danışmanlar: PROF. DR. ABDÜLKADİR OKAN ADDEMİR
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2010
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Üretim Metalurjisi ve Teknolojileri Mühendisliği Bilim Dalı
- Sayfa Sayısı: 95
Özet
Bu çalışmada, mikron altı partikül boyutlarında bor karbür katkısı ve reaksiyon sinterleme yöntemleri ile bor karbür, titanyum diborür ve bor karbür, titanyum dioksit ve elementel karbonun reaksiyonu ile sıcak preste hacimce %85B4C - %15TiB2 oranına sahip kompozitler üretilip; mikron altı bor karbür katkısının ve reasiyon sinterlemenin B4C-TiB2 kompozitlerinin mekanik ve fiziksel özelliklerine etkisi incelenmiştir. Yapılan deneyler sonucunda; mikron altı bor karbür katkısı ile numunelerin sertlik ve kırılma mukavemeti değerlerinde önce artış daha sonra ise azalma gözlenmiştir. Reaksiyon sinterleme ile üretilen numunelerde ise mikron altı bor karbür katkısı ile sertlik ve kırlıma mukavemeti değerlerinde önce azalma daha sonra ise artış gözlenmiştir.
Özet (Çeviri)
In this study, %85B4C - %15TiB2 ratio by volume composites are produced in hot press with reaction sintering method of boron carbide, titanium dioxide and carbon and with the addition of sub micron particle size boron carbide and titanium diboride; in addition to these, the effects of the addition of sub micron boron carbide and reaction sintering on the mechanical and physical properties of B4C-TiB2 composites were examined. Results of the experiments; with the addition of the sub micron boron carbide, first an increase than a decrease was observed on the hardness and the fracture toughness properties of the samples. On the other hand, first a decrease than an increase was observed on the hardness and fracture toughness properties of reaction sintered samples with the addition of sub micron boron carbide.
Benzer Tezler
- Bor karbür-titanyum diborür kompozitlerinin reaktif spark plazma sinterleme yöntemiyle üretilmesi ve karakterizasyonu
Production and characterization of boron carbide-titanium diboride composites by reactive spark plasma sintering
ASLI BURCU ÜSTÜNOVA
Yüksek Lisans
Türkçe
2012
Metalurji Mühendisliğiİstanbul Teknik Üniversitesiİleri Teknolojiler Ana Bilim Dalı
PROF. DR. FİLİZ ÇINAR ŞAHİN
- Polielektrolit ve sürfaktan kullanımının bor karbür tozunun sol-jel metodu ile sentezi üzerindeki etkilerinin incelenmesi
Investigation of the effects of using polyelectrolyte and surfactant on the synthesis of boron carbide powder by sol gel method
ZEYNEP NAZ ATEŞ
Yüksek Lisans
Türkçe
2022
Fizik ve Fizik MühendisliğiYıldız Teknik ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. EROL KAM
PROF. DR. FİGEN KAYA
- Sol-jel yöntemi ile polimerik öncülerden nükleer kalite bor karbür tozların düşük sıcaklıkta üretimi ve radyasyon kalkanı olarak polimer nanokompozitlerde kullanımı
Production of nuclear grade boron carbide powders from polymeric precursors by sol-gel method and their utilization as radiation shield in polymer nanocomposites
SUNA AVCIOĞLU
Doktora
Türkçe
2020
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. FİGEN KAYA
- Synthesis and characterization of hafnium boride-based ceramic powders
Hafniyum borür-esaslı seramik tozlarının sentezlenmesi ve karakterizasyonu
NAZLI AKÇAMLI
Doktora
İngilizce
2016
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. İSMAİL DUMAN
- Combustion synthesis and characterization of molybdenum and boron containing multicomponent composite materials
Molibden ve bor içeren çok bileşenli kompozit malzemelerin yanma sentezi ile üretimi ve karakterizasyonu
SEVINCH RAHIMI MOGHADDAM
Doktora
İngilizce
2019
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. CEVAT BORA DERİN