Elektrokimyasal yollarla ikili metal çöktürme koşullarının araştırılması
Two ways electrochemical investigation of metal deposition
- Tez No: 329533
- Danışmanlar: DOÇ. DR. A. TUNCAY ÖZYILMAZ
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2012
- Dil: Türkçe
- Üniversite: Mustafa Kemal Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 81
Özet
Malzeme bilimi olu?turulan materyallerin yapısal özellikleri ve bu materyalleri elde etme yöntemleri arasındaki ili?kiyi incelemektedir. Malzeme biliminin çalı?malarından biride bir metal yüzeyini ba?ka bir metal yada birden çok metal ile kaplanmasıdır. Bu çalı?mada Cd (Kadmiyum) ve Zn (Çinko) , ikili kaplamanın Bakır ve ITO (?ndiyum Kalay Oksit) elektrot üzerinde gerçekle?tirilmesi ve özelliklerinin incelenmesi amaçlanmı?tır. Kaplama i?lemi elektrokimyasal teknikle yapılmı?tır. Öncelikle dönü?ümlü voltametri tekniği ile kaplama ko?ulları belirlenmi?tir (pH, Sıcaklık, Çözelti deri?imi, v.b.). Daha sonra sabit potansiyelde kaplama gerçekle?tirilip zamana kar?ı akım eğrileri elde edilmi?tir. Bu kaplamaların yüzey morfolojisi Taramalı Elektron Mikroskobu (SEM) ile yüzey bile?imleri ise SEM EDX analizleri ile incelenmi?tir.
Özet (Çeviri)
Two Ways Electrochemical Investigation of Metal Deposition Conditions of the structural properties of materials created by the Materials Science and examines the relationship between methods of obtaining these materials.One of the surface of a metal material science studies, or more than one metal with another metal coating.In this study, Cd (Cadmium) and Zn (Zinc), double coating of ITO (Indium Thin Oxide) and is implemented on the properties of the electrode were investigated.Electrochemical techniques in the process of coating will be made.First of all, with the coating technique of alternating voltammetry conditions to be determined (pH, temperature, solution concentration, etc.) then held constant potential plating.?n additions photos of surface were taken with Scanning Electron Microscopy (SEM) ,SEM ?EDX observing the morphology of cover. Surface analysis investigated the electrochemical properties of the coating techniques.
Benzer Tezler
- Mechanical behaviour of nanoporous metals reinforced with carbon based nanomaterials
Karbon tabanlı nanomalzemelerle güçlendirilmiş nano-gözenekli metallerin mekanik davranışı
DENİZ EZGİ GÜLMEZ
Yüksek Lisans
İngilizce
2017
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MESUT KIRCA
- Lab-On-a-Chip içerisinde insan-immünoglobulin G tayini
Human-i̇mmünoglobuli̇n G detecti̇on in Lab-On-a-Chip
SERDAR ŞANLI
- Characterization of pyrrole and thiophene containing polymers and their copolymers
Pirol ve tiyofen içeren polimer ve kopolimerlerin karakterizasyonu
GÜRSEL SÖNMEZ
Doktora
İngilizce
2002
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. ABDÜLKADİR SEZAİ SARAÇ
- Fonksiyonel ftalosiyaninlerin sentezi, metal sensör, optik ve elektrokimyasal özelliklerinin incelenmesi
The synthesis of functional phthalocyanines and the investigation of metal sensor, optic and electrochemical properties
ARMAĞAN GÜNSEL
- Synthesis, characterization and electrochromic properties of conducting copolymers of terephthalic acid bis-(thiophen-3-ylmethyl)thioester and conducting polymer of 1-(4-fluorophenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole
Tereftalik asit bis-(tiyofen-3-ilmetil) tioesterin iletken kopolimerlerinin ve 1-(4-florofenil)-2,5-di(tiyofen-2-il)-1H-pirolün iletken polimerinin sentezi, karakterizasyonu, elektrokromik özellikleri
ÖZLEM TÜRKARSLAN
Yüksek Lisans
İngilizce
2006
KimyaOrta Doğu Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. LEVENT KAMİL TOPPARE