Geri Dön

Hareketli platformlarla fotogrametrik hacim hesabı üzerine bir çalışma

A case study on determination of object volumes with photogrametric mobile platforms

  1. Tez No: 343131
  2. Yazar: SEDAT GÜNER
  3. Danışmanlar: YRD. DOÇ. DR. İBRAHİM ASRİ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Jeodezi ve Fotogrametri, Geodesy and Photogrammetry
  6. Anahtar Kelimeler: Terrestrial Photogrammetry, GPS, Photo Camera, Direct Positioning, Image Matching, Volumetric Analysis
  7. Yıl: 2013
  8. Dil: Türkçe
  9. Üniversite: Gümüşhane Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Harita Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 68

Özet

Gelişen algılayıcı sistemler ve hızla artan konumsal bilgi ihtiyacı karşısında harita yapım sistemlerinin de vizyonu sürekli değişmektedir. Buna paralel olarak günümüz harita üretim sektörü için hareketli platformlar üzerinde birkaç farklı algılayıcının birlikte kullanıldığı doğrudan konum bilgisini üreten sistemler geliştirilmektedir. Mobil Harita Yapım Sistemi (MHYS) denilen bu sistemler ilk kulanım alanı olan yol envanterinin çıkarılması ve yol üst yapı ve çevresinin görüntülenmesi, izlenmesinin yanında bu günkü geldiği noktada pek çok mühendislik çalışmalarında konum ve obje geometrisi belirleme alanlarında da sıklıkla kullanılmaktadır. Teknolojinin gelişmesi ve paralelinde görüntü işleme tekniklerinin de artan kullanımı MHYS?lerin konum ve geometri bilgisi üretmesi bakımından büyük önem taşımaktadır. Bu çalışmada, yukarıda anılan pahalı sistemlere karşın oldukça ucuz olmasının yanında uzaktanlığını (detay temassızlığını) koruyan bir ölçme sitemi olarak tasarlanan GPS destekli hareketli yersel fotogrametrikölçme sisteminden kamera görüntüleri ve dış yöneltme parametreleri elde edildi. Elde edilen bu bilgiler kullanılarak otomatik görüntü eşleme teknikleri ile yüzey modelleri çıkartıldı. Bu yüzey modellerinin hacimsel analiz çalışmalarında kullanılabilirliği için sonuçları analiz edildi. Anahtar Kelimler: Yersel Fotogrametri, GPS, Fotoğraf Kamerası, Doğrudan Konumlandırma, Görüntü Eşleme, Hacimsel Analiz

Özet (Çeviri)

Vision of map production systems chances steadily in time besides the advancement in sensing system and rapidly increasing spatial information requirements. Parallel to these, mobile mapping systems consisting of several sensors that they can directly produce spatial data are developed by todays map production sector. Nowadays, mobile mapping systems are frequently used for the determination of object position and geometry in many engineering projects. Although they were used for road inventory and capturing its superstructure and surrounding environment and monitoring in their early days. Developing technology and increase in the use of image processing techniques are very important in terms of producing spatial and geometric data. In this study, camera images and exterior orientation parameters were directly obtained by a GPS supported mobile terrestrial photogrammetric positioning system even preventing its remote feature and cheapness against expensive systems mentioned above. Surface models created with these data sets and image processing techniques. The results of produced surface models were analyzed for the usability in volumetric analysis studies. Images were obtained by the system were analyzed by image matching techniques and usability of produced surface models from these analyzes were investigated for the determination of object volumes.

Benzer Tezler

  1. Hareketli platform izlemede güncel yaklaşımlar

    Current approaches on tracking the moving platforms

    MUSTAFA KURT

    Doktora

    Türkçe

    Türkçe

    2004

    Jeodezi ve FotogrametriYıldız Teknik Üniversitesi

    Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı

    PROF.DR. ŞERİF HEKİMOĞLU

  2. GPS destekli mobil yersel fotogrametri sistemi

    GPS supported mobile terrestrial photogrammetry system

    İBRAHİM ASRİ

    Doktora

    Türkçe

    Türkçe

    2011

    Jeodezi ve FotogrametriSelçuk Üniversitesi

    Harita Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. ÖZŞEN ÇORUMLUOĞLU

  3. Ekstrüzyona dayalı yapımda yeniden yapılandırma süreçleri için kavramsal bir çerçeve

    A conceptual framework for the reconfiguration processes in extrusion-based making

    HÜLYA ORAL KARAKOÇ

    Doktora

    Türkçe

    Türkçe

    2021

    Mimarlıkİstanbul Teknik Üniversitesi

    Bilişim Ana Bilim Dalı

    PROF. DR. MERYEM BİRGÜL ÇOLAKOĞLU

  4. Karayolu projelerinde yeni teknolojilerin kullanımı

    Usage of new technologies in highway projects

    EMRAH ERDEM ÖZLÜ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Jeodezi ve Fotogrametriİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. MURAT ERGÜN

  5. Web tabanlı açık kaynak kodlu bir platform geliştirilerek jeodezik çalışmalarla kabuk deformasyonlarının statik modelle belirlenmesinin incelenmesi

    Examining the determination of crustal deformationsby static model with geodetic studies by developing aweb-based open-source code platform

    MEHMET BAK

    Doktora

    Türkçe

    Türkçe

    2024

    Jeodezi ve Fotogrametriİstanbul Teknik Üniversitesi

    Geomatik Mühendisliği Ana Bilim Dalı

    PROF. DR. RAHMİ NURHAN ÇELİK