Geri Dön

Sepiyolitin gazbeton özelliklerine etkisinin incelenmesi

The investigation of the effect of sepiolite on the properties of the autoclaved aerated concrete

  1. Tez No: 344005
  2. Yazar: MUSA SAVAŞ
  3. Danışmanlar: DOÇ. DR. İLHAMİ DEMİR
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2013
  8. Dil: Türkçe
  9. Üniversite: Kırıkkale Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 113

Özet

Gazbeton ince öğütülmüş silisli bir agrega ve inorganik bir bağlayıcı madde (kireç ve/veya çimento) ile hazırlanan karışımın gözenek oluşturucu bir madde ilavesi ile hafifletilmesi ve buhar kürü ile sertleştirilmesi ile elde edilen gözenekli hafif betondur.Bu çalışmada; gazbeton üretiminde hammadde olarak, kuvars kumu yerine kullanılan sepiyolitin gazbeton üzerindeki basınç dayanımı, kuru yoğunluk değeri, rutubet muhtevası değeri ve ısıl iletkenlik değerine etkisi araştırılmıştır. Çalışmada, duvar elamanı olarak kullanılan ve ticari olarak üretimi yapılan G2/04 (Birim Hacim Ağırlığı400 kg/m3, Isı İletim Kat Sayısı 0,11-0,013 W/mK ve Basınç Dayanımı 2,5 N/mm2) sınıfı gazbeton üretimi baz alınarak, Dolsan Madencilik 'ten alınan sepiyolitin, hammadde olarak kullanılan kuvarsit yerine %5, %10, %15, %20 ve %25 oranlarında ikame edilerek gazbeton örnekleri üretilmiştir. Yapılan numuneler 60 ºC sıcaklıkta 4 saat buhar küründe bekletildikten sonra 180 ºC'de 11 bar basınçta 6,5 saat otoklavda küre tabi tutulmuştur. Üretilen örneklerin basınç dayanımı, kuru yoğunluk değeri, rutubet muhtevası değeri ve ısıl iletkenlik değeri belirlenmiştir.Sonuç olarak, gazbetona kuvars yerine sepiyolit ikamesinde optimum oranın %10 olduğu belirlenmiştir.

Özet (Çeviri)

The autoclaved aerated concrete is a porous concrete which is obtained from a mixture composed of fine pulverized silicated aggregate and inorganic binding material (lime and/or cement) and produced by lightening the mixture with a substance causing production pores and hardening it with steam curing.In this study, the effect of the addition of sepiolite used as a raw material in the production of autoclaved aerated concrete on the compressive strength, dry density, moisture content and thermal conductivity values of the aerated concrete was investigated. In the study, the samples of autoclaved aerated concrete were produced by the addition of the sepiolite obtained from Dolsan Madencilik as a raw material instead of quartzite by the ratio of %5, %10, %15, %20 and %25 based on the production of autoclaved aerated concrete in the class of G2/04 (Maximum Gross Density-dry400 kg/m3 , Thermal Conductivity 0,11-0,013 W/mK ve Average Compressive Strenght 2,5 N/mm2 ) which is used as a wall member and produced commercially. The produced samples were subjected to curing in autoclave at 180 ºC and under the pressure of 11 bars for a 6,5 hrs after steam curing at 60 ºC for 4 hrs. Then, the compressive strength, dry density, moisture content and thermal conductivity values of these samples were determined.As a result, the replacement of sepiolite instead of quartzite at the production of autoclaved aerated concrete, the optimum ratio is determined as %10.

Benzer Tezler

  1. Doğal ve yapay malzemelerle oluşturulan reaktif bariyer sistemiyle sızıntı suyu kaynaklı kirlilik kontrolünün irdelenmesi

    Investigation of the leachate sourced pollution control by permeable reactive barriers composed of natural and synthetic materials

    ELİFCAN ORAL

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    Çevre MühendisliğiOndokuz Mayıs Üniversitesi

    Çevre Mühendisliği Ana Bilim Dalı

    DOÇ. DR. EMRE BURCU GÜNGÖR

  2. Kendi kendini temizleyen endüstriyel atıklı betonlar

    Self-cleaning concretes containing industrial waste

    SERDAL ÜNAL

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    İnşaat MühendisliğiEskişehir Osmangazi Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. MEHMET CANBAZ

  3. Biyopolimer yüzeylerinde TiO2'in nano boyutta dağıtılması ve karakterizasyonu

    Dispersion and characterization of TiO2 in nano scale on biopolymer surfaces

    ÖYKÜ ÜRK

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    Kimyaİstanbul Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. AYBEN KİLİSLİOĞLU

    DOÇ. DR. ZEHRA TUBA ŞİŞMANOĞLU

  4. Modelling wellbore hydraulics through thermal rheological sepiolite mud properties

    Sondaj kuyusu hidroliğinin sepiyolit çamuru ısıl reolojik özellikleriyle modellenmesi

    ALI ETTEHADI

    Doktora

    İngilizce

    İngilizce

    2016

    Petrol ve Doğal Gaz Mühendisliğiİstanbul Teknik Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÜRŞAT ALTUN

  5. Sepiolit'in adsorplama ve ağartma özelliklerinin sinterleşme sıcaklığı ile değişimi

    Alteration of adsorption and bleaching properties of sepiolite with its sintering temperature

    NİLGÜN BİÇER

    Yüksek Lisans

    Türkçe

    Türkçe

    1985

    KimyaSelçuk Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. YÜKSEL SARIKAYA