Geri Dön

Toryuma seçici iyon baskılı polimerin hazırlanması ve karakterizasyonu

Preperation and characterization of selective thorium-ion imprinted polymer

  1. Tez No: 346610
  2. Yazar: SİMGE DANACI
  3. Danışmanlar: PROF. DR. MERAL ERAL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2013
  8. Dil: Türkçe
  9. Üniversite: Ege Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Nükleer Bilimler Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 69

Özet

İyonik baskılamada; metil metakrilat monomer (MMA), etilen glikol dimetakrilat (EGDMA) çapraz bağlayıcı ajan ve 2-tenoiltrifloro aseton(TTA)-toryum iyonu kompleksi kalıp molekül olarak kullanılarak; toryum iyonunu seçimli olarak bağlayabilen iyon baskılı polimerler hazırlanmıştır. Moleküler baskılama çalışmalarında, monomer: taslak molekül oranı 4:1 olarak çalışılmıştır. Bu çalışmada, adsorban olarak sentezlenen toryum (IV) iyonu baskılı P(MMA-co-EGDMA) polimeri iki farklı yöntemle, üç adımda sentezlenmiş ve toryum iyonu adsorpsiyonunda kullanılabilirliği incelenmiştir. Hedef iyon, adsorbandan uzaklaştırılarak geri bağlama çalışmaları yapılmıştır. Toryumun nitrat ve klorür formu ile yapılan deneylerinden, toryum iyonu adsorpsiyonunun anyondan bağımsız olduğu sonucuna ulaşılmıştır. Adsorpsiyon için uygun koşullar; pH 4? de ve 15 dakikalık çalkalama süresinde elde edilmiştir. Bu koşullarda elde edilen adsorpsiyon verimi %92 olarak bulunmuştur.

Özet (Çeviri)

Ion imprinted polymer (IIP) material was prepared in two steps: (i) by forming a complex of thorium imprinted ion with thenoyltrifluoro acetone(TTA) and (ii) by thermally copolymerizing them with methyl methacrylate (MMA) as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the cross-linking monomer in presence of benzoyl peroxide(BP) as initiator and 2-methoxy ethanol as porogen. The IIP material formed was subsequently leached with 50% (v/v) HCl to obtain leached materials which then rebind thorium ions selectively from aqueous solutions. Corresponding non-imprinted polymer (NIP) materials were also prepared under the same conditions exactly as the IIP but in the absence of the thorium ion. In this study, thorium (IV) ion imprinted polymeric particlespoly(MMA-co-EGDMA) have been synthesized as an adsorbent. Two different methods were used for this study. Optimum adsorption conditions were investigated in 4 steps. Ion binding studies were carried out by removing the thorium ions from the polymeric particles. Experiments with thorium nitrate and chloride form, have shown that the adsorption of thorium ion is independent from their anion form.In this study, optimum adsorption conditions were determined at pH 4. Adsorption studies werecarried out by ICP-OES.Adsorption efficiency was 92%.Due to the high selectivity shown by this new material for thorium ions, it has been successfully employed for the selective separation and preconcentration of thorium ions from aqueous systems. Extensive characterizations of IIP (both unleached and leached) were done using TGA, IR and BET-surface area and pore size analysis.

Benzer Tezler

  1. Toryum –nadir toprak elementleri konsantresinden toryumun yan ürün olarak kazanılması ve solvent emdirilmiş reçineler ile nadir toprak elementlerinin ayrılması

    Recovery of thorium as a by-product from thorium-rare earth elements concentrate and separation of rare earth elements using solvent impregnated resins

    SELCAN SENGÜL

    Doktora

    Türkçe

    Türkçe

    2021

    KimyaEge Üniversitesi

    Nükleer Bilimler Ana Bilim Dalı

    PROF. DR. HÜSEYİN TEL

  2. Yatağan termik santrali kül dağındaki toryumun kül ve topraktaki davranışının ve yeraltı sularına geçişinin incelenmesi, katı faz ekstraksiyonu ile deriştirilmesi

    Investigation of thorium behaviour in ash and soil, and mobilization to underground water in Yatağan coal power plant ash basin, thorium concentration via solid phase extraction

    BÜLENT KIRKAN

    Doktora

    Türkçe

    Türkçe

    2012

    KimyaMuğla Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. GÜL ASİYE AYÇIK

  3. Uranyum ve toryumun adsorpsiyonu için aljinat biyopolimerlerinin hazırlanması ve çeşitli uygulama alanlarının incelenmesi

    Preparation of alginate biopolymers for uranium and thorium adsorption and investigation of different application areas

    CEM GÖK

    Doktora

    Türkçe

    Türkçe

    2010

    KimyaEge Üniversitesi

    Nükleer Bilimler Ana Bilim Dalı

    PROF. DR. ŞULE AYTAŞ

  4. Sulu Çözeltilerden U(VI) ile Th(IV)'ün Farklı Adsorbanlarla Adsorpsiyonunun İncelenmesi ve Sentetik Radyoaktif Atık Sulara Uygulanması

    Investigation of U(VI) and Th(IV) Adsorptıon with Different Adsorbents from Aqueous Solutıons and Application to Synthetıc Radioactive Waste Water

    ÇİĞDEM ÖTER

    Doktora

    Türkçe

    Türkçe

    2018

    KimyaYüzüncü Yıl Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. ÖZLEM SELÇUK ZORER

  5. Toryum, seryum ve lantanın TBP emdirilmiş XAD-16 reçinede ardışık sorpsiyon ile ayrılma koşullarının incelenmesi

    Investigation of seperation conditions of thorium, cerium and lanthanum via successive sorption onto TBP impregnated XAD-16 resin

    İBRAHİM ÖZTÜRK

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    KimyaEge Üniversitesi

    Nükleer Bilimler Ana Bilim Dalı

    PROF. DR. YÜKSEL ALTAŞ