Geri Dön

Farklı yapıştırıcıların flor salınımlarının ve sıyırma kuvvetlerine olan dirençlerinin karşılaştırılması

Comparison of the fluoride realease capacities and shear bond strengths of four different orthodontic adhesives

  1. Tez No: 355218
  2. Yazar: BERNA EVRENOL İZMİRLİ
  3. Danışmanlar: DOÇ. DR. NAZAN KÜÇÜKKELEŞ
  4. Tez Türü: Doktora
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1998
  8. Dil: Türkçe
  9. Üniversite: Marmara Üniversitesi
  10. Enstitü: Sağlık Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Ortodonti Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 103

Özet

Özet yok.

Özet (Çeviri)

The aim of the study was to evaluate the shear bond strength and the fluoride release capacities of four orthodontic light cured adhesives. Group 1 and 2 were the composites, Transbond and Sequence; Group 3 and 4 were the glass ionomer cements, Fuji Ortho LC and 3M. Forty premolar teeth were divided into four groups and metal integral based brackets were bonded to the premolar teeth with different adhesives. Shear stress was applied by the Instron testing machine in a gingivo occlusal direction till the brackets fell off. When the results were statistically evaluated, the only significant difference was between Transbond XT and Sequence. For the fluoride release test, 10 disc shaped specimens were prepared from every adhesive. They were placed into a 1 ml of distilled water and put into an incubator at 37°C. The measurements were taken every day for a week, then once a week till the end of the first month, and once in two weeks till the end of the third month. The total and daily released fluoride amount during the testing period was statistically analized between the groups. The difference between the composite and glass ionomer cements were obvious. All the groups were statistically different from each other (p

Benzer Tezler

  1. New type of f- and p- containing polymeric materials viametal free click reactions

    Metalsiz klik tepkimeleri ile flor ve fosfor içeren yeni tippolimerik malzemeler

    GÖKHAN SAĞDIÇ

    Doktora

    İngilizce

    İngilizce

    2024

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. UFUK SAİM GÜNAY

    PROF. DR. EMRAH ÇAKMAKÇI

  2. Synthesis of 3,5-bis(perfluorobenzyloxy)benzyl acrylate containing polymers

    3,5-bis(perflorobenziloksi)benzil akrilat içeren polimerlerin sentezi

    TUBA ÇAKIR ÇANAK

    Doktora

    İngilizce

    İngilizce

    2012

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. İ. ERSİN SERHATLI

  3. Kan ve tükürük kontaminasyonu durumunda farklı yapıştırıcıların sıyırma kuvvetlerine olan dirençlerinin karşılaştırılması

    Effect of blood and saliva contamination on shear bond strength of brackets bonded with 4 different adhesives

    MEHMET OĞUZ ÖZTOPRAK

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2005

    Diş HekimliğiYeditepe Üniversitesi

    Ortodonti Ana Bilim Dalı

    PROF. DR. TÜLİN ARUN

  4. Karbon kompozitlerin cıvatalı ve yapıştırmalı bağlantılarında hasar analizi

    Failure analysis of bolted and bonded carbon composite joints

    AHMET FARUK KURAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    ÖĞR. GÖR. LEVENT KIRKAYAK

  5. Değişik sıcaklık ve nem etkisinde çalışan birleştirilmiş kompozit malzemelerin yorulma mukavemetlerinin incelenmes

    Investigation of the fatigue strengths of jointed composite materials under various temperature and moisture effects

    GÜRKAN ALTAN

    Doktora

    Türkçe

    Türkçe

    2009

    Mühendislik BilimleriPamukkale Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. MUZAFFER TOPÇU