Determination of minimum aspect ratio for rigid PVC pipe die
Bir sert PVC bord kalıbında asgari kesit oranının belirlenmesi
- Tez No: 364320
- Danışmanlar: DOÇ. DR. SABRİ ALTINTAŞ
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1987
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 179
Özet
Özet yok.
Özet (Çeviri)
In this treatise, an effort is made to determine a minimum aspect ratio for a rigid PVC pipe die. In pursuing that objective, the mechanisms whereby extruders work and how plastics flow through dies are presented. Following this introduction is a review of the various extrusion methods. Next comes a discussion of material data necessary for the design of a die. In an attempt to link practice with theory, a theoretical foundation for die design is also considered. A design methodology is then laid down for a rigid PVC pipe die and clarified with an example. Lastly included is an interpretetion of tests run on pipe samples which were extruded on the dies implemented in accordance with the calculations. It is shown that the extrusion volume and the mechanical properties of a rigid PVC pipe are related to and can be controlled by the land length. It is also deduced that a minimum die aspect ratio exists below which the properties of a pipe deteriorate unacceptably.
Benzer Tezler
- Rüzgar enerjisi dönüşüm sistemlerinin aerodinamik kapsamı ve güç belirlenmesi analizlerinde potansiyel akım yöntemleri
Aerodynamic aspects of wind energy conversion systems and potential flow methods in performance prediction analysis
ALİ ALPER AKYÜZ
Yüksek Lisans
Türkçe
1997
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak Mühendisliği Ana Bilim Dalı
DOÇ. DR. M. ADİL YÜKSELEN
- NiMn,NiMnP+ ve CrFe alaşım ince filmlerinde elektron spin rezonans (ESR) ve direnç ölçümleri
Başlık çevirisi yok
MUSTAFA ÖZDEMİR
Doktora
Türkçe
1998
Fizik ve Fizik Mühendisliğiİstanbul Teknik ÜniversitesiFizik Mühendisliği Ana Bilim Dalı
PROF. DR. YILDIRHAN ÖNER
- Çelik lif donatılı betonların performansa dayalı tasarımı ve optimizasyonu
Optimization and performance based design of steel fiber reinforced concretes
MUHSİN YALÇIN
Doktora
Türkçe
2009
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. CANAN TAŞDEMİR
- Çift turboprop motorlu ve sivil amaçlı bir keşif/devriye uçağının roskam yöntemi ile ön dizaynı
Başlık çevirisi yok
SELÇUK ESEN
- Pervane aerodinamiği için girdap kafes uygulamaları
Vortex lattice applications for propeller aerodynamics
EMRE ŞAHİN
Yüksek Lisans
Türkçe
2013
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. MAHMUT ADİL YÜKSELEN