A study on compliance characteristics of common crack growth specimens
Başlık çevirisi mevcut değil.
- Tez No: 364326
- Danışmanlar: DOÇ. DR. ÖKTEM VARDAR
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1987
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 127
Özet
Özet yok.
Özet (Çeviri)
In fracture mechanics tests, one of the parameters that must be known is the specimen crack length. One of the techniques used to measure the crack length is“compliance technique”. It averages crack length variations through the specimen thickness and can be easily utilized where environmental chambers make direct crack ~ength measurements ·difficult. In this study, the information in the literature about compliance cha~acteristics of common crack growth specimens is reviewed, alternative solutions are compared and new expressions ~re developed by using compliance data in the literature. An experimental work is performed to compare .the loading and the unloading compliances in the presence of plastic deformation and to investigate the effect of crack tip configuration on the compliance characteristics of compact tension (C(T» specimens. It is concluded that loading and unloading compliances are the same in the presence of plastic deformation for small scale yielding and it seems that the compliance calibration curves shift to left with increasing crack tip radius so that they estimate smaller crack lengths for any specific compliance value.
Benzer Tezler
- Eğri eksenli enine çatlaklı çubukların düzlem dışı analizi
Out of plane analysis of curved beams with transverse crack
BARIŞ AYBER
Yüksek Lisans
Türkçe
2017
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. EKREM TÜFEKCİ
- Zor hasta olgusu ve Isparta il merkezindeki hastaneler üzerinde bir çalışma
Difficult patient phenomenon and a study on hospitals in center of Isparta
RUKİYE ÇELİK
Yüksek Lisans
Türkçe
2012
HastanelerSüleyman Demirel ÜniversitesiSağlık Yönetimi Ana Bilim Dalı
DOÇ. DR. RAMAZAN ERDEM
- Menkul kıymetlerin pazarlanması ve aracı kurumlar üzerine bir uygulama
Merketing of securıtıes and a study on ıntermediary ınstıtutıons
AYÇA ERTURAN
- Numerical and experimental investigation on the crushing behaviour of auxetic lattice cells produced with additive manufacturing techniques
Eklemeli imalat teknikleri ile üretilmiş ökzetik kafes yapıların ezilme davranışlarının nümerik ve deneysel olarak incelenmesi
KADİR GÜNAYDIN
Doktora
İngilizce
2020
Havacılık Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. HALİT SÜLEYMAN TÜRKMEN
DR. ÖĞR. ÜYESİ ANTONIO MATTIA GRANDE
- The role of taxation in European Union Sovereign debt crisis
Vergilendirmenin Avrupa Birliği kamu borçları krizi üzerindeki etkisi
SEMİHA ÖZTÜRK
Yüksek Lisans
İngilizce
2019
EkonomiOrta Doğu Teknik ÜniversitesiAvrupa Çalışmaları Ana Bilim Dalı
DOÇ. DR. GÜL İPEK TUNÇ