Rezin infiltrasyon tekniğinin ağartma işlemi uygulanmış başlangıç çürük lezyonları üzerine etkisinin değerlendirilmesi.
The evaluation of resin infiltration effects on bleached initial caries lesions.
- Tez No: 366087
- Danışmanlar: PROF. DR. NURDAN MESERRET BAŞEREN
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2014
- Dil: Türkçe
- Üniversite: Hacettepe Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Diş Hekimliği Bölümü
- Bilim Dalı: Diş Hastalıkları ve Tedavisi Ana Bilim Dalı
- Sayfa Sayısı: 139
Özet
Bu in vitro çalışmanın amacı, ağartma işlemi uygulanmış beyaz nokta lezyonlarının mikrosertliği ve renk değişimi üzerine rezin infiltrasyon uygulamasının etkisinin ve rezinin penetrasyonunun değerlendirilmesidir. Çalışmada 70 adet çekilmiş sığır kesici dişleri kullanılmış ve her bir dişten elde edilen iki adet mine örneği akrilik kalıplara gömülmüştür (n=135). Örneklerin başlangıç renkleri ve yüzey sertliklerinin belirlenmesi için sırasıyla, CIE L*a*b* sistemi ve Vita Klasik renk skalasının elde edildiği spektrofotometre ve mikrosertlik test cihazı kullanıldı. Örneklerde yapay beyaz nokta lezyonları oluşturulduktan sonra, renk ve mikrosertlik ölçümleri tekrarlandı. Ardından, örnekler rastgele üç gruba bölündü (n=45): Grup I- Rezin infiltrasyon; Grup II-Ağartma; Grup III: Ağartma/Rezin infiltrasyon. Diğerlerinden faklı olarak Grup III'deki örnekler; ağartma uygulaması sonrasında 2 hafta süreyle pH siklusuna tabi tutulduktan sonra, rezin infiltrasyon uygulaması yapılarak, tekrar 2 hafta süreyle pH siklusuna tabi tutuldu. Uygulamalar sonrası tüm örnekler 4 hafta boyunca pH siklusuna tabi tutuldu. Renk ve mikrosertlik ölçümleri 4 hafta sonunda tekrarlandı. Renk değişimi ve yüzey mikrosertlik iyileşme oranı (SMHR) hesaplandı. Rezin infiltrantın penetrasyonu tarama elektron mikroskopu ile değerlendirildi. Veriler ANOVA and Tukey testi (5%) ile istatistiksel olarak değerlendirildi. Grup I ve Grup III arasında SMHR değerleri anlamlı bir faklılık göstermezken (p=1.00), ağartma uygulanmış grup en düşük yüzey mikrosertlik iyileşme değeri gösterdi (p
Özet (Çeviri)
The aim of this in vitro study was to investigate the effect of resin infiltration on color and microhardness of white spot lesions treated with bleaching and to analysis of the penetration of the infiltrant. Enamel specimens were prepared from extracted bovine incisors (n=135). Initial color and surface hardness were measured with spectrophotometer using the CIE L*a*b* system, Vita Classical shade guide and a hardness device, respectively. After producing artificial white spot lesions, color and hardness values were remeasured. Then specimens were randomly divided into three groups (n=45per group): Group I-resin infiltrated; Group II- bleached; Group III-bleached/resin infiltrated. Resin infiltration was performed after the bleached samples submitted to a pH-cycling regime for two weeks in group III and the specimens resubjected to a pH cycling regime for two weeks. After subjecting all specimens to pH cyclus, assessment of color and microhardness were repeated after 4 weeks of treatments. Color alterations and the percentage of surface microhardness recovery (SMHR) were calculated. The penetration of infiltrant was evaluated with scanning electron microscope. Data were submitted to one-way ANOVA and Tukey test (5%). There were no significant differences between Group I and III in SMHR values (p=1.00). Bleached samples showed the lowest SMH recovery (p < 0.05). In terms of color, no statistically significant differences were found in ΔE* values between group I and II (p=0.525). Color alterations (ΔE*) were observed in all groups with the highest of group III. The bleaching treatment prior resin infiltration, produced significant color alteration in demineralized enamel. It was concluded that the microhardness of carious lesions increased with the infiltration of resin. Furthermore, the bleaching treatment prior resin infiltration, produced no significant alteration on microhardness. The penetration of resin infiltrant was significantly deeper in Group I. Within the limitations of this study, it can be concluded that the bleaching treatment before the resin infiltration produced significant color alteration in tested specimens. Resin infiltration was shown to significantly increase micro-hardness of demineralized enamel in Group I and III. The bleaching treatment infiluenced the penetration of the infiltrants negatively.
Benzer Tezler
- Yapay çürük lezyonu oluşturulmuş dişlerde farklı yüzey hazırlık prosedürlerinin rezin infiltrasyon tekniğinin penetrasyon derinliğine etkisi: Konfokal mikroskop çalışması
The effect of different surface preparation procedures on the depth of penetration of the resin infiltration technique in teeth with artificial caries lesions: A confocal microscope study
MEHMET ÇİLOĞLU
Diş Hekimliği Uzmanlık
Türkçe
2021
Diş HekimliğiGaziantep ÜniversitesiÇocuk Diş Hekimliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ GÜL KESKİN
- Beyaz nokta lezyonlu dişlerde beyazlatma sonrası antioksidan uygulamasının rezin infiltrasyon başarısına etkisi
The effect of antioxidant application on the success of resin infiltration after bleaching in teeth with white spot lesions
İSMAİL SERHAT SADIKOĞLU
Doktora
Türkçe
2019
Diş HekimliğiEge ÜniversitesiRestoratif Diş Tedavisi Ana Bilim Dalı
PROF. DR. MURAT TÜRKÜN
- Beyaz nokta lezyonlarının tedavisinde uygulanan farklı tedavi yöntemlerinin klinik takibi
White spot lesions of different treatment modalities in the treatment of clinical follow-UP
MUHAMMED ÇAYABATMAZ
Doktora
Türkçe
2014
Diş HekimliğiErciyes ÜniversitesiDiş Hastalıkları ve Tedavisi Ana Bilim Dalı
DOÇ. DR. YAHYA ORÇUN ZORBA
- Bukkal yüzeydeki beyaz nokta lezyonlarında uygulanan farklı tedavi seçeneklerinin klinik olarak karşılaştırılması
Comparision of different threpeutic approaches at white spot lesions on buccal surfaces clinically.
BURCU GÖZETİCİ
Diş Hekimliği Uzmanlık
Türkçe
2015
Diş Hekimliğiİstanbul Medipol ÜniversitesiRestoratif Diş Tedavisi ve Endodonti Ana Bilim Dalı
YRD. DOÇ. DR. FUNDA ÖZTÜRK BOZKURT
- Icon® materyali ile rezin infiltrasyon yöntemi sonucunda materyalin mikrosertliği, yapay çürük lezyonuna penetrasyonu ve AFM ile yüzey kalitesinin incelenmesi
Evaluation of the resin infiltration technique with the material icon® and the assessment of microhardness, penetration into artificial caries lesions and surface quality using AFM
ELİF BERİL GÜRDOĞAN