Sezgisel yöntemlerle kablo demetlerinin en iyi şekilde yerleştirimi üzerine bir çalışma
A study about optimizing placement of the cable bunchs using heuristic methods
- Tez No: 372013
- Danışmanlar: DOÇ. DR. AYLİN KANTARCI
- Tez Türü: Yüksek Lisans
- Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Computer Engineering and Computer Science and Control
- Anahtar Kelimeler: Yerleştirme problemleri, kutulama problemi, paketleme problemi, sırt çantası, tesis yerleşim problemi, sezgisel yöntemler, Placement problems, bin packing, packaging problem, knapsack, plant layout problem, heuristics methods
- Yıl: 2014
- Dil: Türkçe
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Bilgisayar Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 87
Özet
Bu tezde, yerleşim ve paketleme problemleri kapsamında ele alınan sırt çantası, kutulamave tesis yerleşimproblemleri incelenmiş, bu problemler için önerilen çözüm yöntemlerinden yola çıkılarak işletmedeki yerleşim problemi için sezgisel bir çözüm yöntemi geliştirilmiştir. Kablo demetlerinin raflara en iyi şekilde yerleştirilmesi probleminin çözümü iki aşamalı olarak ele alınmıştır. Birinci aşamasında tesis yerleşim problemine benzetilerek en uygun modülün seçimi sağlanmış, ikinci aşamada ise paketleme ve sırt çantası problemlerine benzetilerek modül içerisindeki en uygun adres belirlenmiştir. Tezin sonunda, C# programlama dili ile geliştirilen uygulamanın ekran görüntüleri ve geliştirilen sezgisel çözüm yönteminin, mevcut durum ve rastgele atama yapan iki farklı çözüm yöntemiyle karşılaştırmalı performans sonuçları paylaşılmıştır.
Özet (Çeviri)
In this thesis, bin packing, knapsack and plant placement problems which are placement and packing problems have been studied and a heuristic solution has been generated for the placement problem of the factory on the basis of recommended solutions for these problems. The problem of placement of the cable bunches into the shelves has been covered under two steps. In the first step, selection of the best possible container problem has been solved on the basis of quadratic assignment problem solution methods. In the second step, the problem of finding the best address in the container has been solved on the basis of bin packing and knapsack problem solutions. At the end of the thesis, the user interface screenshots of the software, which has been developed by C# programming language, and performance results of the heuristic solution method, which is compared with current state and two different randomized solution methods, have been shared.
Benzer Tezler
- Akış tipi çizelgeleme problemlerinin sezgisel yöntemlerle optimizasyonu
Optimization of flow shop scheduling problems using heuristic techniques
SÜNDÜZ DAĞ
Doktora
Türkçe
2012
Endüstri ve Endüstri Mühendisliğiİstanbul Üniversitesiİşletme Ana Bilim Dalı
PROF. DR. NECDET ÖZÇAKAR
- Demontaj hattı dengelemeye yönelik sezgisel yöntemlerle esnek bir yazılım geliştirilmesi
Development of a flexible software for disassembly line balancing with heuristic methods
ÜMRAN KAYA
Yüksek Lisans
Türkçe
2019
Endüstri ve Endüstri MühendisliğiSüleyman Demirel ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. HALİL İBRAHİM KORUCA
- Kafes sistemlerin performans optimizasyonu ve gerdirme yöntemiyle yük taşıma kapasitelerinin artırılması
Increasing the performance of truss structures via optimization of their specifications and installing pre-tensioned cables
ALI MORTAZAVI
Doktora
Türkçe
2017
İnşaat MühendisliğiEge Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. AYHAN NUHOĞLU
- A capacitated and distance-limited continuous location allocation problem for spatial planning of decentralized distribution systems
Merkezi olmayan dağıtım sistemlerinin sürekli uzayda konumsal planlaması için kapasite ve mesafe kısıtlı yer seçimi problemi
OĞUZHAN EFE ŞAKRAK
Yüksek Lisans
İngilizce
2017
Endüstri ve Endüstri Mühendisliğiİhsan Doğramacı Bilkent ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. AYŞE SELİN KOCAMAN
- Investigation of timbral qualities of guitar using wavelet analysis
Gitarın tınısal özelliklerinin dalgacık analizi kullanılarakaraştırılması
ŞAFAK EKMEN
Yüksek Lisans
İngilizce
2020
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. ŞAHİN SERHAT ŞEKER
PROF. DR. CAN KARADOĞAN