Production of nano-sized boron products from boron derivatives
Bor türevlerinden nano boyutlarda bor uç ürünleri üretimi
- Tez No: 374180
- Danışmanlar: PROF. DR. TURAN BATAR
- Tez Türü: Doktora
- Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2014
- Dil: İngilizce
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Maden Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Cevher Hazırlama Bilim Dalı
- Sayfa Sayısı: 151
Özet
Türkiye, dünyadaki en büyük bor rezervlerine sahip olmasına rağmen ileri teknoloji ürünlerde kullanılan bor uç ürünlerinin fabrikasyonu için gerekli tesislere sahip değildir. Var olan tesisler ise bor uç ürün üretimi için yeterli teknolojiye sahip değillerdir. Kısacası, ülkemizde boraks pentahidrat, boraks dekahidrat ve borik asit gibi bor türevleri üretilirken, bu ürünlerden asıl katma değeri oluşturan bor uç ürünlerinin eldesini sağlayacak tesisimiz bulunmamaktadır. Endüstriyel çapta bor karbür, bor nitrür, bor karbonitrür ve elementel bor gibi uç ürünler çok yüksek enerji gideri ve çevresel sorunlar (karbondioksit emisyonu) ile üretilmektedir. Bu çalışmanın amacı ise, elektro depozitleme yöntemi kullanarak nano boyutlarda toz yada kaplama olarak bor uç ürün eldesini sağlamaktır. Düşük maliyetli, düşük enerji giderli ve çevre dostu bu kimyasal yöntem ile bor uç ürün eldesinin mümkün olup olmadığı araştırılmıştır. Sonuç olarak, elektro depozitleme yöntemi ile karbondioksit emisyonu, sinterleme ve ısıl işlemler olmadan, düşük sıcaklıklarda bor uç ürünlerinin eldesi sağlanmıştır. Kullanılan her bor türevi ve üretilen bor uç ürününe göre gerekli analizler ışığında en uygun deneysel koşullar belirlenmiştir.
Özet (Çeviri)
Turkey has the most abundant boron reserves in the world; however, the boron end products to be used in advanced technology are not available since the existing production plants in Turkey do not possess the technology to produce advanced boron end products. Though, several boron derivatives such as borax pentahydrate, borax decahydrate and boric acid used in this study are produced in Turkey, there is no production of boron end products from these derivatives. The production of boron end products such as boron carbide, boron nitride, boron carbonitride and elemental boron are possible on industrial scale. However, these processes which consume large amounts of energy and cause unacceptable levels of environmental problems (carbon dioxide emission) stop short of being economical. The main objective of this thesis is to assess the production of nano-sized boron end products from boron derivatives by electro-deposition as powders or coating. The possibility of nano-sized boron end product manufacturing by a relatively cheap and energy conscious chemical method is investigated. It was found that, production of boron end products could be achieved by electro-deposition at low temperatures without any carbon dioxide emission regardless of the path of sintering and thermal treatment. The optimum experimental parameters for the process are provided through an in depth analysis of test results.
Benzer Tezler
- Püskürtmeli kurutma ve termal bozunma prosesleri ile ZnO esaslı partiküllerin ve kompozit yapıların sentezlenmesi ve karakterizasyonu
Characterization and synthesis of ZnO based particles and composite structures via spray drying and thermal decomposition processes
ŞEYMA DUMAN
Doktora
İngilizce
2016
Seramik Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. BURAK ÖZKAL
- Farklı uygulama alanları için nano boyutta bor esaslı malzemelerin sentez ve karakterizasyonu
Synthesis and characterization of boron based nano-sized materials for different application areas
CANSU NOBERİ
Doktora
Türkçe
2017
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. CENGİZ KAYA
- Fabrication of vanadium and niobium borides via milling-assisted solid state synthesis methods and sintering techniques
Vanadyum ve niyobyum borürlerin öğütme destekli katı hal sentezleme yöntemleri ve sinterleme teknikleri ile üretimi
ÖZGE BALCI
Doktora
İngilizce
2015
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Bölümü
PROF. DR. İSMAİL DUMAN
- Sol-jel yöntemi ile polimerik öncülerden nükleer kalite bor karbür tozların düşük sıcaklıkta üretimi ve radyasyon kalkanı olarak polimer nanokompozitlerde kullanımı
Production of nuclear grade boron carbide powders from polymeric precursors by sol-gel method and their utilization as radiation shield in polymer nanocomposites
SUNA AVCIOĞLU
Doktora
Türkçe
2020
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. FİGEN KAYA
- Atık suların temizlenmesinde mineral kökenli atıklardan adsorbent geliştirilmesi
Development of mineral based adsorbent from waste materials for wastewater treatment
ÜNZİLE YENİAL
Doktora
Türkçe
2018
Maden Mühendisliği ve Madencilikİstanbul Teknik ÜniversitesiCevher Hazırlama Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLAY BULUT