Elektronik atık devre kartlarının pirolizi
Pyrolysis of e- waste printed curciut boards
- Tez No: 392677
- Danışmanlar: PROF. DR. AHMET MUAMMER CANEL
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: Türkçe
- Üniversite: Ankara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 133
Özet
Bu çalışmanın amacı elektronik atıklardan piroliz yöntemiyle değerli ürünler elde etmek, bu ürünlerin yapısal ve kimyasal bileşimlerini ve verimleri üzerine etkiyen faktörleri incelemektir. Çalışmada, Evciler Kimya Elektronik Atık Fabrikasından temin edilen örnekler (cep telefonu devre kartı ve elektronik ve elektrikli eşya devre kartı) kullanılmıştır. Deneylerde öncelikle; sıcaklığın etkisini incelemek amacıyla her iki örnek için 500, 600, 700, 800 ve 900C'de pirolize uğratılmıştır. E-atıkların pirolizinde sıvı ürün verimine sıcaklığın ve katalizörün etkisi araştırılmıştır. Katalizörün etkisini incelemek amacıyla verimin en yüksek olduğu deney sıcaklıklarında MCM-41 ve kırmızı çamur (red mud) katalizörleri kullanılarak piroliz deneyleri yapılmıştır. Araştırma sonucunda cep telefonu devre kartı için verimin en yüksek olduğu piroliz sıcaklığı 700C, elektronik ve elektrikli eşya devre kartı için 600C olarak bulunmuştur. İşlemler sonucunda elde edilen sıvı fazın bileşimi GC-MS analiziyle aydınlatılmıştır. Katı fazın bileşimi FTIR ve SEM analizleriyle incelenmiştir. Örneklerin sıcaklıkla bozunmasını incelemek amacıyla her iki örnek için TGA deneyleri yapılmıştır. TGA ölçümlerinin Ozawa ve Coats-Redfern yöntemlerine göre değerlendirilmesi sonucu kinetik hesaplamalar yapılmıştır. Elektronik ve elektrikli eşya devre kartı için Ozawa yöntemi ile hesaplanan aktivasyon enerjisi değerleri farklı atmosferlerde sırasıyla (N2+O2: 4-1, N2+O2: 9-1 ve N2 atmosferi ) 45.25; 26.96 ve 29.66 kJ/mol , Coats-Redfern yöntemi ile hesaplanan aktivasyon enerjisi değerleri 0.031; 0.029 ve 0.020 kJ/mol olarak bulunmuştur. Cep telefonu devre kartı için Ozawa yöntemi ile hesaplanan aktivasyon enerjisi değerleri farklı atmosferlerde sırasıyla (N2+O2:4-1, N2+O2: 9-1 atmosferi ) 72.15; 19.10 kJ/mol , Coats-Redfern yöntemi ile hesaplanan aktivasyon enerjisi değerleri 0.024; 0.019 ve 0.019 kJ/mol olarak bulunmuştur.
Özet (Çeviri)
The purpose of this study is to obtain valuable products from electronic waste (e-waste) with pyrolysis method, to examine structural and chemical composition of these products, and to investigate the factors that effect the efficiency of these products. The samples ( printed circuit boards of mobile phone and electronic equipments) used in this study were provided from Evciler Chemistry E-Waste Factory.In order to investigate the effect of the temperatures, both samples were pyrolysed at 500, 600, 700, 800 and 900C. Through the pyrolysis of e-wastes, the effects of the temperature and catalyst on the liquid product efficiency were investigated. To examine the effect of the catalyst, red mud and MCM-41 catalysts were used in the pyrolysis experiments at the temperatures that the efficiency is the highest. As a result of experiments it was found that pyrolysis temperature with the highest efficiency for printed circuit boards of mobile phone is 700C, and for printed circuit boards of electronic equipments is 600C. The composition of liquid phase which was obtained through the processes was identified by analysing GC-MS spectroscopic method. Composition of solid phase was determined by using spectroscopic methods such as FTIR and SEM. To examine decomposition of the both samples with the temperatures TGA experiments were conducted. Evaluating TGA results via Ozawa and Coats-Redfern methods some kinetic parameters of thermal decompositions were caculated. By using Ozawa method activation energy values for printed circuit board of electronic equipment at different atmospheres (N2+O2: 4-1, N2+O2: 9-1 ve N2 atmosphere ) were caculated as 45.25; 26.96 and 29.66 kJ/mol respectively, and by using Coats-Redfern method activation energy values were calculated as 0.031; 0.029 and 0.020 kJ/mol respectively. By using Ozawa method, activation energy values for printed circuit boards of mobile phone at different atmospheres (N2+O2: 4-1 and N2+O2: 9-1 atmosphere ) were calculated as 72.15; 19.10 kJ/mol respectively, and by using Coats-Redfern method, activation energy values were calculated as 0.024; 0.019 and 0.019 kJ/mol respectively.
Benzer Tezler
- Atık baskılı devre kartlarının termal bozunma süreçlerinin incelenmesi
Investigation of thermal degradation processes of waste printed circuit board
HAVVA HANDE CEBECİ
Yüksek Lisans
Türkçe
2021
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. AYSEL KANTÜRK FİGEN
DR. ÖĞR. ÜYESİ KORKUT AÇIKALIN
- Atık baskı devre kartlarından metallerin farklı yöntemlerle ayrıştırılmaları
Separation of metals from waste printed circuit boards with different methods
DUYGU HAZAL AKÇALI
Yüksek Lisans
Türkçe
2017
Çevre MühendisliğiGebze Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. NİHAL BEKTAŞ
- Elektronik atıklardan metallerin fiziksel ve hidrometalurjik yöntemlerle geri kazanımı
Recovery of metals from electronic wastes using physical separation and hydrometallurgical methods
ERSİN YENER YAZICI
Doktora
Türkçe
2012
Maden Mühendisliği ve MadencilikKaradeniz Teknik ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
DOÇ. DR. HACI DEVECİ
- Atık devre kartlarından bakırın biyoliç ve kimyasal liç yöntemleriyle geri kazanımı
Recovery of copper from waste circuit boards by bioleaching and chemical leaching methods
AHMET DENİZ BAŞ
Yüksek Lisans
Türkçe
2012
Maden Mühendisliği ve MadencilikKaradeniz Teknik ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
DOÇ. DR. HACI DEVECİ
- Evaluation of recovery potential for precious and rare earth metals from e-waste
E-atıklardaki değerli ve nadir toprak metallerinin geri kazanım potansiyelinin değerlendirilmesi
MERVE ŞAHAN
Yüksek Lisans
İngilizce
2016
Çevre MühendisliğiBoğaziçi ÜniversitesiÇevre Teknolojileri Ana Bilim Dalı
DOÇ. DR. BURAK DEMİREL