Geri Dön

Identification and localization of damage: A flexibility-based approach

Başlık çevirisi mevcut değil.

  1. Tez No: 400036
  2. Yazar: BURCU GÜNEŞ
  3. Danışmanlar: PROF. DİONİSİO P. BERNAL
  4. Tez Türü: Doktora
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2001
  8. Dil: İngilizce
  9. Üniversite: Northeastern University
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 149

Özet

Özet yok.

Özet (Çeviri)

Changes in the flexibility matrices have been investigated by several researchers as a possible means of characterizing damage. However, no systematic approach has been offered to map these changes to responsible elements of the structure. The Damage Locating Vector (DLV) approach presented in the thesis provides a systematic and theoretically based methodology for interrogating the changes in flexibility and localizing the damage. In this regard, a related issue addressed in this study is the development of an approach to assemble the flexibility matrices exclusively from the measured vibration data without computing the undamped modes, which often presents challenges in practice. Another source of difficulty with the available methods that use flexibility derives from the fact that they are restricted to cases where the input is known deterministically. A fundamental contribution made in this direction is the development of a procedure for extracting matrices that differ from the flexibility by a single undetermined multiplier for cases where the excitation derives from ambient sources and is not known in a deterministic sense. The last issue examined in this study is estimation of the degree of damage using the synthesized flexibility at the damaged state. The results of the application of the methodology to the ASCE-IASC benchmark structure indicate that the localization technique is robust in the presence of noise, modal truncation and modeling errors. Quantification of the damage, however, requires an accurate baseline model.

Benzer Tezler

  1. Identification and localization of damage:a flexibility-based approach

    Esneklik matrisi temelli hasar tanımlama ve lokalızasyon yöntemi

    BURCU GÜNEŞ

    Doktora

    İngilizce

    İngilizce

    2001

    İnşaat MühendisliğiNortheastern University

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. DİONİSİO BERNAL

  2. Hava araçlarında yapısal sağlık izlemesi için mekanolüminesans malzemenin geliştirilmesi

    Development of mechanoluminescent material for structural health monitoring in aircraft

    ONUR ÖZDAĞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2025

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ NURİ SOLAK

  3. Identification and localization of high impedance faults in distribution networks

    Dağıtım şebekelerindeki yüksek empedans arızaların tespiti ve konumunun belirlenmesi

    EREN BAHARÖZÜ

    Doktora

    İngilizce

    İngilizce

    2025

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. SUAT İLHAN

    DR. ÖĞR. ÜYESİ GÜRKAN SOYKAN

  4. Field testing and model updating of typical RC buildings for damage identification

    Tipik betonarme yapılarda hasar tespiti üzerine saha deneyleri ve model güncellemesi

    PINAR İNCİ KOÇAK

    Doktora

    İngilizce

    İngilizce

    2017

    Bilim ve Teknolojiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ALPER İLKİ

    PROF. DR. F. NECATİ ÇATBAŞ

  5. Hasarlı kirişlerde hasar tespiti için hüzme oluşturma algoritmalarının kullanılması

    Damage identification in damaged beams using beamforming algorithms

    OZAN ÜREL

    Yüksek Lisans

    Türkçe

    Türkçe

    2025

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. UĞURCAN EROĞLU