Geri Dön

A reconfigurable primitive operator digital filter structure

Başlık çevirisi mevcut değil.

  1. Tez No: 400345
  2. Yazar: HALİL İBRAHİM ESKİKURT
  3. Danışmanlar: DR. D. H. HORROCKS, DR. T. ARSLAN
  4. Tez Türü: Doktora
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1999
  8. Dil: İngilizce
  9. Üniversite: University of Wales-Cardiff
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Elektronik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 185

Özet

Özet yok.

Özet (Çeviri)

The general aim of this work is to investigate a reconfigurable integrated circuit architecture that allows Primitive Operator Filters (POFs) to be efficiently implemented. Digital filters are frequently implemented in hardware form for high speed applications, but conventional approaches lead to very complex circuits. The POF technique greatly reduces the complexity but leads to irregular structures, which therefore do not naturally lend themselves to Integrated Circuit implementation.In this work, a Primitive Operator Filter Field-Programmable Gate Array (POF FPGA) architecture is proposed that allows efficient implementation of POF direct form digital filters, that can be reconfigured for different filters.Various sizes of Configurable Arithmetic Logic Blocks, (CALBs) are investigated for the FPGA and the best one is identified.CALB connection scheme are investigated and a two stage hierarchical approach is adopted. At the upper hierarchical level, a single-bus is used to interconnect the CALBs. At the lower hierarchical level, a fully connected non-blocking method is used for connecting the primitive operators within the CALBs.The VLSI Design is completed to cover all operational parts of the prototype POF FPGA architecture, and simulation studies confirm its correct operation. To implement a digital filter, its POF Signal Flow Graph (SFG) structure is mapped onto the POF FPGA by partitioning the SFG into sub-graphs. Each sub-graph is realised on a CALB. This mapping has been successfully performed for a number of typical filter examples and confirm the general efficiency of the proposed POF FPGA architecture.Formulas have been obtained that allow the required number of CALBs, array area, and operation times to be estimated. These estimates are of importance to both users of the POF FPGA and also to designers of future generations of POF FPGA.Conclusions on the work and suggestions for future work provided

Benzer Tezler

  1. Sahada programlanabilir kapı dizileri ile lojik devre tasarımı ve VHDL kullanılarak bazı devrelerin gerçekleştirilmesi

    Başlık çevirisi yok

    ATEŞ BERNA

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    PROF. DR. AHMET DERVİŞOĞLU

  2. A reconfigurable wearable slot antenna design suitable for smart glasses

    Akıllı gözlük uygulamasına yönelik yeniden yapılandırılabilir giyilebilir yarık anten tasarımı

    ERDEM ÇİL

    Yüksek Lisans

    İngilizce

    İngilizce

    2020

    Elektrik ve Elektronik MühendisliğiBoğaziçi Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ SEMA DUMANLI OKTAR

  3. A reconfigurable computing platform for real time embedded applications

    Gerçek zamanlı uygulamalar için yeniden yapılandırılabilinir bilişim platformu

    FATİH SAY

    Doktora

    İngilizce

    İngilizce

    2011

    Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik Üniversitesi

    Elektrik ve Elektronik Mühendisliği Bölümü

    DOÇ. DR. CÜNEYT FEHMİ BAZLAMAÇCI

  4. A research on a reconfigurable hypar structure for architectural applications

    Mimari uygulamalar için hareketli hiperbolik paraboloit strüktürler üzerine bir araştırma

    GÖZDE SUSAM

    Yüksek Lisans

    İngilizce

    İngilizce

    2013

    Mimarlıkİzmir Yüksek Teknoloji Enstitüsü

    Mimarlık Bölümü

    DOÇ. DR. KORAY KORKMAZ

  5. ReMBot: A reconfigurable, miniature, modular robot with soft connection mechanisms

    ReMBot: Yumuşak bağlantı mekanizmalarına sahip, yeniden-yapılandırılabilir, minyatür, modüler robot

    MUSTAFA UĞUR

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Makine Mühendisliğiİhsan Doğramacı Bilkent Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ONUR ÖZCAN