Konfeksiyon sanayinde pantolon üretiminin M.T.M. (method time measurement) yöntemi ile optimizasyonu
Başlık çevirisi mevcut değil.
- Tez No: 42166
- Danışmanlar: PROF.DR. NÜKET YETİŞ
- Tez Türü: Doktora
- Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1995
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 259
Özet
ÖZET Bu çalışmada, klasik beş cepli spor pantolon modeli için standart üretim süresi M. T. M yöntemi uygulanarak saptanmıştır. öncelikle seçilen isletmenin çalışma şartları sabit tutularak tek tek işlem analizleri yapılmış ve mevcut standart süre tesbit edilmiştir. Daha sonra uzanma mesafelerini kısaltan ve çalışanın hareketlerini kolaylaştıran nakil araçlarının kullanılması önerilmiş ve bu durumda elde edilecek standart üretim süresi, M. T. M. yöntemi ile saptanmıştır. Standart sürenin tesbitinde harcanan süreyi en fazla etkileyen ve zaman kayıplarının en fazla olduğu bölüm olan Dikimhane (îş Hazırlık - Dikim - Bitim işlemleri) Bölümü ele alınmıştır. önerilen sistemin uygulanması durumunda üretimde sağlanacak verimlilik artışı %15 olarak bulunmuştur. Elde edilen bu verimlilik artış oranı, yüksek üretim -»gelir artışına karşılık yatırım maliyetinin düşük olması açısından önemli bir orandır. Sonuç olarak önerilen bu sistem, standart üretim türünde çalışan tüm işletmeler için verimlilik artışı sağlayan bir sistemdir. üretilen pantolonda model değişikleri olması durumunda sistem yeni modele uyum sağlayabilecektir. Ancak pantolon dışındaki diğer ürün türleri için yeni sistemlerin geliştirilmesi gereklidir.
Özet (Çeviri)
ABSTRACT In this study, the standard production period of the classical sport trouser with five pockets is evaluated by using M.T.M. method. First of all, the working proses is analyzed step by step by keeping the working conditions as constant, then the standard period is evaluated. And then, the tools which shorten the distance of reaching and facilitate the actions of the workers are advised. Lastly, the standard production period of this kind of working process is determined by using M.T.M. method. Also, in this study sewing room (work preparing - sewing - finishing) is examined because of it's great effect on the period and it's a known fact that the production in this department needs much more time than the others. The increase in the productivity would be 15% when the suggested method is applied. This increase is a considerable one especially if the high level of total income from the production and the low level of cost of investment is taken into consideration. As a result, this system leads an increase in the productivity for the all factories produce in the standard form. In the case of any modification in the model of the trousers this system would adapt to this new model. Also, it's important to note that new systems are required for the all productions except the trousers. IV
Benzer Tezler
- Konfeksiyon sanayinde işçi verimliliğini etkileyen faktörler üzerine bir araştırma
Research into the factors which influence labour productivity in apparel industry
OKŞAN KANSOY
Yüksek Lisans
Türkçe
1997
Tekstil ve Tekstil MühendisliğiEge ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÜLSEREN KUMRUER
- Konfeksiyon işletmelerinde performans ölçümleri ve işgücü planlanmasına katkıları
Başlık çevirisi yok
SEVİN BRAV
Yüksek Lisans
Türkçe
1985
İşletmeEge ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. M. NAZMİ ERCAN
- Değişik tipte kumaş kalitelerinin konfeksiyon öncesi uygulanabilirlik, işlenebilirlik özellikleri üzerine bir araştırma
Başlık çevirisi yok
BUKET BÜYÜKÇELEBİ
Yüksek Lisans
Türkçe
1998
Tekstil ve Tekstil MühendisliğiEge ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÜLSEREN KURUMER
- Türk tekstil ve konfeksiyon ihracatçısı küçük ve orta ölçekli işletmelerde uluslararasılaşma sürecinde dijitalleşmenin etkileri ve örgütsel öğrenme odaklı bir model önerisi
The effects of digitalization in textile and clothing industries during internationalization with an organizational learning focus: A model proposal
BAHAR DİVRİK
Doktora
Türkçe
2022
İşletmeİstanbul Medipol ÜniversitesiYönetim ve Strateji Bilim Dalı
DOÇ. DR. ELİF BAYKAL
- Türkiye'deki tekstil-konfeksiyon işletmelerinin (KOBİ'lerinin) tedarik, üretim ve lojistik faaliyetlerinin ulusal rekabet üzerindeki etkileri
The effects of supply, production and logistics process of textile-apparel sector in Turkey (KOBIs) on national competition
ÖZLEM KAYA
Doktora
Türkçe
2013
Giyim EndüstrisiGazi ÜniversitesiGiyim Endüstrisi ve Moda Tasarımı Ana Bilim Dalı
PROF. DR. FATMA ÖZTÜRK