Ejektörlü otobüs klimalarında ejektör boyutlarının çeşitli parametrelere göre belirlenmesi
Determination of the ejector dimensions used in bus air conditioning systems according to various parameters
- Tez No: 423994
- Danışmanlar: YRD. DOÇ. DR. ŞABAN ÜNAL
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: Türkçe
- Üniversite: Osmaniye Korkut Ata Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 95
Özet
Ejektörlü soğutma sistemleri uzun yıllardır araştırmacılar tarafından incelenmekte olan bir alandır. Bu çalışmada; otobüslerde kullanılan mevcut buhar sıkıştırmalı soğutma çevrimi ve iki fazlı ejektör ile iki buharlaştırıcı kullanılarak oluşturulan yeni çevrimin termodinamik analizi yapılmıştır. Ejektörlü soğutma sisteminde kullanılan ejektörün boyutları belirlenerek çeşitli parametrelere göre değişimleri incelenmiştir. Elde edilen sonuçlara göre, otobüs klima sistemine ejektör eklenmesiyle sistemin soğutma etkinliğinin yaklaşık %15 oranında artacağı görülmüştür. 32kW soğutma kapasitesine sahip bir otobüs klimasında, Akdeniz iklim şartları dikkate alınarak belirlenen çalışma şartlarına göre toplam ejektör uzunluğu yaklaşık 793mm olarak hesaplanmıştır. Ejektör toplam uzunluğunun hesaplanmasında en etkili parametrelerin ise lüle, karışım bölgesi ve difüzör verimleri ile yoğuşturucu ve birinci buharlaştırıcı sıcaklıklarının olduğu görülmüştür.
Özet (Çeviri)
Ejector cooling systems is an area that is being investigated by researchers for many years. In this study; thermodynamic analysis of current vapor compression refrigeration cycle used in buses and new vapor compression refrigeration cycle with two phase ejector and two evaporators is made. Dimensions of ejector used in ejector refrigeration cycle are determined and changes in dimensions are investigated according to various parameters. Air conditioning systems which are used in buses have increased cooling efficiency about 15 percent just by adding two phase ejector into the system according to the obtained results. The total length of the ejector according to operating conditions determined by considering Mediterranean climate zone is estimated to be approximately 793mm in a bus air conditioning system which has 32kW cooling capacity. It also has been seen that nozzle, mixing section and diffuser efficiencies, condenser and primary evaporator temperatures are the most effective parameters in calculation of the total length of the ejector.
Benzer Tezler
- Ejektörlü otobüs klimalarında yoğuşturucu ve buharlaştırıcının boyutlandırılması ve çeşitli parametrelere göre incelenmesi
Dimensioning of the condenser and evaporator for the ejector bus air conditioning system and investigation according to different parameters
AHMET KÜÇÜKÇİRKİN
Yüksek Lisans
Türkçe
2015
Makine MühendisliğiOsmaniye Korkut Ata ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ŞABAN ÜNAL
- R134a ve R744 ile çalışan otobüs klimalarında iki fazlı ejektörün genleşme valfi olarak kullanılması durumunda sistemin çeşitli parametrelere göre analizi
The analysis of bus refrigeration system working with R134a and R744 refrigerants according to different parameters in case of using two-phase ejector as expansion valve
ÇAĞRI KUTLU
Yüksek Lisans
Türkçe
2015
Makine MühendisliğiOsmaniye Korkut Ata ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ŞABAN ÜNAL
- Ejektör genleştiricili otobüs klimasında ejektör boyutlarının HAD yöntemi kullanılarak belirlenmesi
Determination of the ejector dimensions using the CFD method for the bus air conditioner with ejector expansion
HAKAN AKGÜN
Doktora
Türkçe
2022
Makine MühendisliğiOsmaniye Korkut Ata ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. ŞABAN ÜNAL
- Ejektörlü soğutma sistemlerinin termodinamik analizi
Thermodynamic analysis of a cooling system with ejector
ESRA SEVEN
Yüksek Lisans
Türkçe
2021
Makine MühendisliğiOsmaniye Korkut Ata ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. ERTUĞRUL CİHAN
- Ejektörlü bir soğutma sisteminin tasarımında optimizasyon koşullarının teorik ve deneysel olarak araştırılması
Theoretical and experimental investigation of optimization conditions in a design of an ejector cooling system
GAMZE YAKUT
Doktora
Türkçe
2016
EnerjiSüleyman Demirel ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA ACAR