Geri Dön

Karbon bazalt hibrit kompozitlerin mekanik özelliklerine diziliş sırasının etkisinin incelenmesi

Investigation of effect of stacking squence on the mechanical properties of hybrid composites

  1. Tez No: 434997
  2. Yazar: ERTUĞRUL GAZİ KAYMAZ
  3. Danışmanlar: YRD. DOÇ. DR. MUSTAFA ASLAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Metalurji Mühendisliği, Metallurgical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2016
  8. Dil: Türkçe
  9. Üniversite: Karadeniz Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 109

Özet

Bu çalışmada el yatırma yöntemiyle üretilen karbon-bazalt elyaf takviyeli kompozitlerin üretim sırasındaki diziliş sırasının kompozitin mekanik özelliklerine etkisi incelenmiştir. El yatırma yönteminde kullanılan reçinelerin değişmesinin kompozite kazandırdığı özellikler ve mukavemet özelliklerine yapmış olduğu etkiler incelenmiştir. El yatırma yöntemi kullanılarak üretilen bu malzemeler 25x25 cm boyutlarında ve 3 cm kalınlıkta üretilmiştir. Üretim sırasında 40 bar basınç uygulanmış ve tahta kalıplar kullanılmıştır. Yapılan çalışmada reçine farkının etkisi de incelenmiştir. El yatırma yöntemi kullanılarak toplamda 8 hibrit 8 düz numune üretilmiştir. Reçineler polyester reçine ve vinil ester reçinesi, sertleştiriciler ise MEKP ve kobalt kullanılmıştır. Numuneler çekme, eğilme ve darbe deneyi olmak üzere 3 farklı deneye tabi tutulmuştur. Elde edilen sonuçlar doğrultusunda diziliş sırasının bu malzemelerin mekanik özelliklerine etkisi incelenmiştir.

Özet (Çeviri)

In this study effect of the stacking squence on mechanical properties of carbon-basalt reinforced composites are investigated. Also the effect of changing resin which used in hand lay-up process, on composites strength properties and what we gained to composites properties. The composites are manifactured by hand lay-up process and dimensions are 25x25 cm and approximetaly 3-4 cm for thickness. Applied 40 bar pressure and used board molds. In this process effect of resin difference also investigated. With this process 8 hybrid 8 regular specimen manifactured. Polyester and vinly ester used as resins, methly ethylketon peroxide and cobalt used as hardeners. Tensile, flexural and impact tests applied on specimens. The effect on the mechanical properties of the material in line sequential ordef of the results obtained was investigated.

Benzer Tezler

  1. Development of new generation, high performance polypropylene composites

    Yeni nesil, yüksek performanslı polipropilen kompozitlerin geliştirilmesi

    ORKUN KAYMAKÇI

    Doktora

    İngilizce

    İngilizce

    2021

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. NURSELİ UYANIK

  2. Hibrit kompozitlerin termo-mekanik özelliklerin incelenmesi

    Investigation of thermo-mechanical properties of hybrid composites

    ZEKİYE ERDOĞAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Makine MühendisliğiErciyes Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MUNİSE DİDEM DEMİRBAŞ

  3. The properties of natural fiber reinforced hybrid composite materials as an alternative to carbon fiber composites

    Karbon fiber kompozitlere alternatif olarak doğal fiber takviyeli hibrit kompozit malzemelerin özellikleri

    OKAN ÇELİK

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Otomotiv MühendisliğiÇukurova Üniversitesi

    Otomotiv Mühendisliği Ana Bilim Dalı

    PROF. DR. ABDULKADİR YAŞAR

  4. Investigation of impact behavior of the nano-scaled particle filled hybrid composite plates

    Nano katkılı hibrit kompozit plakaların darbe davranışlarının incelenmesi

    NURETTİN FURKAN DOĞAN

    Doktora

    İngilizce

    İngilizce

    2019

    Makine MühendisliğiGaziantep Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AHMET ERKLİĞ

  5. Termal çevrimin bazalt-karbon ıntra-ply hibrit elyaf takviyeli karbon nanotüp veya grafen dolgulu polimer kompozitlerin mekanik ve termal özellikleri üzerindeki etkileri

    The effect of thermal cycling on mechanical and thermal properties of graphene or carbon nanotube dispersed intra-ply basalt-karbon fiber hybrid polymer composites

    FARZİN AZİMPOUR SHİSHEVAN

    Doktora

    Türkçe

    Türkçe

    2015

    Makine MühendisliğiAtatürk Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. HAMİT AKBULUT