Geri Dön

PLC ile soğutma sistemi otomasyonu

Cooling system automation with PLC

  1. Tez No: 438901
  2. Yazar: AHMET PİŞMİŞOĞLU
  3. Danışmanlar: DOÇ. ÖMER GALİP SARAÇOĞLU
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: PLC, tel çekme, otomasyon, PLC, wire drawing, automation
  7. Yıl: 2016
  8. Dil: Türkçe
  9. Üniversite: Erciyes Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 66

Özet

Çelik tel çekme fabrikalarında soğutma sistemleri, yaygın olarak kullanılan ısı değiştiricilerdir. Soğutma sistemlerin amacı hem sisteme beslenen suyun sıcaklığını istenilen değerlere indirmek hem de sisteme istenilen basınç değerinde suyun beslenmesini sağlamaktır. Çalışmada sıcak su havuzunda toplanan suyun sıcaklığı ölçülerek soğutma kulelerinin çalışması, hattın basınç değeri ölçülerek de soğuk suyun makinelere beslenmesini sağlayan grupları otomatik olarak denetleyen bir program yazılmıştır. Bu şekilde sıcaklık ve basınç parametrelerinin ikisini de hesaba katarak makinelere beslenen su istenilen set sıcaklığına düşürülürken herhangi bir arızaya sebebiyet vermeden sistemin kontrolü sağlanmaktadır. Bu tez çalışmasında PLC ile soğutma sisteminin otomasyonu tasarlanmış ve gerçekleştirilmiştir. Sistemin kontrolünü gerçekleştirmek için PLC ve Operatör Panel kullanılmıştır. Kullanıcı operatör panel üzerinden otomatik ya da manuel kontrol işlemleri yapabilmektedir. Yapılan otomasyon sistemi sayesinde % 20 ile %25 arasında enerji tasarrufu sağlanmış, pompa motorları sırayla çalıştırılarak eş yaşlandırma yapılmış ve sistem otomatik olarak çalıştığı için sistemi kontrol eden operatöre ihtiyaç kalmamıştır.

Özet (Çeviri)

Cooling systems are widely used to exchange the heat emerged in stell wire drawing factories. The purposes of cooling system are both to reduce the temperature of water supplied to the system to desired values and to provide the feeding of the water at desired pressure system. In this study a program has been written that control two groups automatically. First, the cooling towers are running by measuring the temperature of the water collected in the hot water pool. Second, the water pumps are treading cold water from cold water pool by measuring the pressure of the pipe line. In this way, wire drawing machines are running with desired water temperature and pressure without any fault in the cooling system. In this study, automation of the cooling system has been designed and implemented with PLC. PLC and operator panel are used to control of the system. Users can control the process both automatically and manually via the operator panel. Automation system provides energy savings between 20 % and 25 %. Also pump motors running in sequence so that co-aging is made to pumps. Finally system works automacally therefore system does not need an operator to control the system.

Benzer Tezler

  1. PLC ile kontrol edilen endüstriyel bir sistemin cep telefonu ile uzaktan kontrolü

    The remote control by using mobile phone of an industrial system which is controlled PLC

    KUDRET DEMİR

    Yüksek Lisans

    Türkçe

    Türkçe

    2010

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolGazi Üniversitesi

    Elektrik Eğitimi Ana Bilim Dalı

    PROF. DR. İSMAİL COŞKUN

  2. Rulman yağlama sistemi test otomasyonu ve arayüzü geliştirilmesi

    Test automation and interface development for bearing lubrication system

    İSMAİL ATİZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Elektrik ve Elektronik MühendisliğiMarmara Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. HAYRİYE KORKMAZ

  3. Sıvı yağ üretimi ve kazan proseslerinde enerji verimliliği için sistem tasarımı, uygulaması ve otomasyonu

    System design, implementation and automation for energy conservation in oil production and boiler processes

    SÜLEYMAN YILMAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Elektrik ve Elektronik MühendisliğiÇukurova Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. K. ÇAĞATAY BAYINDIR

  4. Bir pvc profil üretim tesisindeki su soğutma sisteminin enerji analizi ve iyileştirilmesi

    Energy analysis and improvement of water cooling system in a pvc profile production facility

    İSMAİL CANER

    Yüksek Lisans

    Türkçe

    Türkçe

    2014

    EnerjiBalıkesir Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. NADİR İLTEN

  5. Ekstrüzyon makinesi sıcaklık kontrolü

    Temperature control of extrusion machine

    BERK SEVİNÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Kontrol ve Otomasyon Mühendisliği Ana Bilim Dalı

    PROF. DR. MÜJDE GÜZELKAYA