Geri Dön

Mechanical performance of self-compacting glass concrete and its application in concrete filled steel tubular members under compression

Kendiliğinden yerleşen cam katkılı betonların mekanik performansı ve basınç altındaki beton dolgulu çelik tüp elemanlarda uygulanması

  1. Tez No: 477756
  2. Yazar: RAHMAN KHALEEL MAHMOOD AL BAWI
  3. Danışmanlar: DOÇ. DR. ESRA METE GÜNEYİSİ
  4. Tez Türü: Doktora
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2017
  8. Dil: İngilizce
  9. Üniversite: Gaziantep Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 177

Özet

Çelik ve beton kullanımını içeren kompozit sistemler, yapı mühendisliğinde yaygın olarak kullanılmaktadır. Son zamanlarda, atık ürünlerin beton üretimi gibi mühendislik uygulamalarında kullanılması, çevre dostu yapıların geliştirilmesini ve sürdürülebilir üretim kavramını teşvik etmektedir. Bu tezde, öncelikle, yapısal kendinden yerleşen beton (KYB) üretiminde yeşil renkli atık camın (AC) kullanılması olasılığı araştırılmıştır. Bunun için basınç, yarmada çekme, net eğilme dayanımları ve elastisite modülü açısından mekanik ve kırılma özellikleri değerlendirildi. Kırılma özellikleri çentikli kirişler üzerindeki üç noktalı eğilme testi ile de ölçülmüştür. Tezin ikinci bölümünde, AC içeren KYB dolgulu ve eksenel yükleme yapılan çelik tüp elemanların sayısal olarak yapısal tepkileri araştırılmıştır. Çalışmanın ana parametreleri ince ve iri AC agrega içeriği (% 0 - 100), beton çekirdeğinin basınç dayanımı (46-47 MPa), çap -et kalınlık oranı D/t (40-100) ve çelik tüpün akma dayanımından fy (250-750 MPa) oluşmaktadır. Kompozit kolonların eksenel yük taşıma kapasitesini (Nu) hesaplamak için ACI tasarım kodu kullanılmıştır. Ayrıca, karşılaştırma amacıyla, Nu değerlerini hesaplamak için araştırmacılar tarafından önerilen iki yeni deneysel formülasyon kullanılmıştır. Sonuçlar, AC kullanımının dayanımda % 30' a kadar bir azalmaya neden olduğunu, ancak daha az kırılgan davranış gözlendiğini göstermiştir. Çelik tüpün D/t oranının ve fy ' nın artmasıyla, AC katkılı KYB' lara sahip kompozit kolonlar için makul dayanım seviyeleri başarıyla elde edilmiştir.

Özet (Çeviri)

Composite construction including the utilization of steel and concrete has been widely used in structural engineering. Recently, the reuse of the waste products in engineering applications such as concrete production promotes the development of the eco-friendly structures and encourages the concept of sustainable production. In this thesis, firstly, the possible use of green-colored waste glass (WG) in the production of structural self-compacting concrete (SCC) was studied. For this, mechanical and fracture properties in term of compressive, splitting tensile, net flexural strengths and modulus of elasticity were evaluated. The failure characteristics were also measured by means of three-point bending test on the notched beams. In the second part of the thesis, the structural response of the steel tubular members filled with SCCs having WG and subjected to axial loading were investigated numerically. The main parameters of the study were fine/coarse WG aggregate content in SCCs (0 to 100 %), compressive of concrete core (46-67 MPa), diameter to thickness ratio D/t (40 to 100) and yield strength fy (250 to 750 MPa) of the steel tube used. ACI design code was utilized for computation of the axial load carrying capacity (Nu) of the composite columns. Moreover, for comparison purposes, two new empirical formulations proposed by the researchers were employed for calculating Nu values. Results indicated that the use of WG caused a reduction up to 30 % in strength, however less brittle behavior was observed. With increasing D/t ratio and fy of the steel tube, reasonable ultimate strength levels for the composite columns having WG-SCCs were successfully obtained.

Benzer Tezler

  1. Kendiliğinden yerleşen betonlarda beton ile donatı aderansı ilişkisinin araştırılması

    Investigation of the adherence behavior between concrete and reinforcement on self compacting concrete

    AHMET BEYCİOĞLU

    Doktora

    Türkçe

    Türkçe

    2013

    Teknik EğitimGazi Üniversitesi

    Yapı Eğitimi Ana Bilim Dalı

    PROF. DR. HÜSEYİN YILMAZ ARUNTAŞ

  2. Self-compacting geopolymer & concrete filled polymer tubes

    Kendiliğinden yerleşen jeopolimer ve beton dolgulu polimer tüpler

    ALI KHALID HUSSEIN HUSSEIN

    Doktora

    İngilizce

    İngilizce

    2019

    İnşaat MühendisliğiGaziantep Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ABDULKADİR ÇEVİK

    DR. ÖĞR. ÜYESİ AHMET EMİN KURTOĞLU

  3. Concrete filled glass fiber reinforced polymer (gfrp) short column

    Beton yerleştirilmiş cam fibertakviyeli polimer kısa kolonlar

    ABDUL RAZIQ HAKIMI

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    İnşaat MühendisliğiGaziantep Üniversitesi

    Mekanik Ana Bilim Dalı

    PROF. DR. ABDULKADİR ÇEVİK

    YRD. DOÇ. DR. MEHMET EREN GÜLŞAN

  4. Properties of glass fiber reinforced scc and structural performance of short composite columns having such concrete core

    Cam fiber takviyeli kyb'un özellikleri ve bu beton kora sahip kısa kompozit kolonların yapısal performansı

    YAHYA RESAN ATEWI ATEWI

    Doktora

    İngilizce

    İngilizce

    2017

    İnşaat MühendisliğiGaziantep Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ESRA METE GÜNEYİSİ

  5. Mechanical performance of glass textile reinforced cementitious composites

    Cam tekstil donatılı çimentolu kompozitlerin mekanik özellikleri

    HAMED AGHAFAM

    Yüksek Lisans

    İngilizce

    İngilizce

    2016

    Tekstil ve Tekstil Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. BEKİR YILMAZ PEKMEZCİ