Geri Dön

Farklı kayalardan elde edilen yapı taşı ve agregalarda yapay bozunma deneylerinin dayanım üzerindeki etkisinin belirlenmesi

Determination of the effect of freezing and thawing on the resistance of building stone and aggregates obtained from different rocks

  1. Tez No: 484215
  2. Yazar: MESUT BOR
  3. Danışmanlar: YRD. DOÇ. DR. ALİ ÖZVAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Jeoloji Mühendisliği, Geological Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2017
  8. Dil: Türkçe
  9. Üniversite: Yüzüncü Yıl Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Jeoloji Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 118

Özet

Geçmişten günümüze kadar kullanılan yapı malzemelerinin büyük bir çoğunluğu doğal kaya malzemelerden oluşmaktadır. Doğal kaya malzemeler atmosferik koşullar karşısında bozunabilmektedir. Bu nedenle, laboratuvar ortamında bu malzemelere hızlandırılmış bozunma testleri uygulanmakta ve bu test sonuçlarına göre malzeme seçilmektedir. Bu tez çalışmasında, farklı şekil ve boyutlardaki farklı kayaların bozunma testler sonrasındaki performanslarının ölçülmesi amaçlanmıştır. Bu amaçla küp ve agrega şekilli örnekler üzerinde donma-çözülme ve tuz kristallenmesi testleri yapılmıştır. 13 farklı kaya örneğinin hem bozunma öncesi ve hem de sonrasına ait fiziksel ve mekanik özellikleri karşılaştırılmıştır. Deney sonuçlarına göre, yapıtaşı ölçeğinde kayaç için en yıkıcı neden tuz kristallenmesi ile gelişen basınçtır. Testler sonucunda en zayıf kayaların ignimbirit ve killi kireçtaşı olduğu belirlenmiştir. Ayrıca, granit örneğinin küp ve agrega üzerindeki bozunma performansı karşılaştırılmıştır. Granit küp şekilli hali ile bozunmaya karşı en sağlam kayayken agrega boyutunda yüksek bozunmaya uğradığı gözlenmiştir. Sonuç olarak, farklı kayaların fiziksel özelliklerinin, bozunma derecesinin ve parçalanmasının porozite ve mineralojik bileşime bağlı olduğu belirlenmiştir.

Özet (Çeviri)

The majority of the building materials used from the past to the present day are natural rock materials. Natural rock materials can be destroyed because of atmospheric conditions. For this reason, artificial weathering tests are applied to these materials under laboratory conditions, and materials are selected for building use according to these test results. In this thesis study, the aimed was to measure the deterioration mechanism of different rocks which are different in shape and size. For this purpose, freeze-thawing and salt crystallization tests were carried out on cube and aggregate-shaped specimens. Physical and mechanical properties of 13 different rock samples were compared both before and after disintegration. According to the test results, the most destructive cause for rock in building stone scale is the salt crystallization pressures. Also as a result of the tests, the weakest rocks were determined to be ignimbrite and clayey limestone. In addition, the deterioration performance of the granite on cube and aggregate forms is compared. Consequently, it is observed that granite has high deterioration in aggregate size has although it is the strongest rock in the cube shape. Finally, the tests determined that the physical properties of the rocks, the degree of disintegration and fragmentation depend on the porosity and mineralogical composition.

Benzer Tezler

  1. Doğanşehir- Malatya bölgesindeki tektonomagmatik / metamorfik kayaçlardan üretilen suni yapıtaşlarının fiziko-mekanik ve estetik özellikleri

    The physico-mechanical and aesthetical characteristics of the artificial building stones produced from the tectonomagmatic/metamorphic units from Doğanşehir-Malatya region

    OĞUZHAN YAZICI

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Jeoloji MühendisliğiKahramanmaraş Sütçü İmam Üniversitesi

    Jeoloji Mühendisliği Ana Bilim Dalı

    DOÇ. DR. TAMER RIZAOĞLU

  2. Burdur ili mermer sektörünün kurumsal ve ekonomik yapısı

    İnstitutional and economic structure of marble sector in burdur

    AHMET SARITAŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2006

    EkonomiAkdeniz Üniversitesi

    İşletme Ana Bilim Dalı

    PROF.DR. AYŞE KURUÜZÜM

  3. Tuz (NaCl) kristallenmesinin kayaçların mühendislik parametreleri üzerine etkisi

    The effect of salt (NaCl) crystallization on engineering parameters of rocks

    ALİ BOZDAĞ

    Doktora

    Türkçe

    Türkçe

    2013

    Jeoloji MühendisliğiSelçuk Üniversitesi

    Jeoloji Ana Bilim Dalı

    DOÇ. DR. OSMAN GÜNAYDIN

  4. Yapı malzemelerinin tek eksenli sıkışma dayanımının çivi tabancası ile dolaylı olarak tayini

    Determination of the uniaxial compressive strength of construction materials using a nail gun

    İLKNUR KARAASLAN ÖZDEMİR

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Jeoloji MühendisliğiAnkara Üniversitesi

    Jeoloji Mühendisliği Ana Bilim Dalı

    PROF. DR. KAMİL KAYABALI

  5. Beton basınç dayanımına boyut ve cidar etkisi

    Size and wall effects on compressive strength of concretes

    ÖZGÜR ARARAT

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. MUSTAFA HULUSİ ÖZKUL