Arsenik(III) tayini için polimerik fluoresans sensör geliştirilmesi
Development of polymer based fluorescent sensor for arsenic(III) determination
- Tez No: 487996
- Danışmanlar: PROF. DR. ECE KÖK YETİMOĞLU, YRD. DOÇ. DR. SONER ÇUBUK
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Analitik Kimya Bilim Dalı
- Sayfa Sayısı: 48
Özet
Çalışmamızda insan sağlığına ve çevre üzerine son derece kötü etkileri olan As(III) iyonu için literatürde ilk defa yer alacak olan polimerik esaslı bir sensör kullanılarak yeni bir fluorimetrik yöntem geliştirilmiştir. Geliştirilen yöntem As(III) tayini alanında bir ilk olmakla birlikte kullanılan sensörün kolay bir şekilde hazırlanması ve aynı zamanda hedef iyona hızlı bir şekilde cevap vermesi ve pratik bir biçimde As(III) iyonunun tayinine imkan tanımasıyla da mevcut yöntemlere üstünlük sağlamaktadır. Öncelikle ATR-FTIR ve SEM kullanılarak karakterizasyonu yapılan membranın daha sonra fluoresans özellikleri incelenmiştir. As(III) iyonu varlığında fluoresans şiddeti üzerine pH, süre, yabancı iyonların etkisi gibi değişkenler sistematik olarak araştırılmıştır. Geliştirilen yöntem ile 376 nm uyarma dalga boyuna karşılık 422 nm emisyon dalga boyu kullanılarak pH: 2'de 20 saniyede As(III) iyonu tayin edilebilmektedir. Yöntemin doğrusal olduğu aralık 6,65×10-9-3,99×10-8 mol L-1 (0,50-2,99 µg L-1) olup tespit sınırı 2,33×10-9 mol L-1 (0,173 µg L-1) olarak hesaplanmıştır.
Özet (Çeviri)
In this work, a new fluorimetric method has been developed using a polymeric based sensor for the first time in the literature for the As(III) ion, which has extremely poor effects on human health and the environment. The developed method carries a feature of being the first in the field of As(III) determination. It also provides superiority over available methods by allowing the sensor used to be easily prepared and at the same time responding rapidly to the target ion and allowing the determination of As(III) ion in a practical manner. Firstly, the fluorescence properties of the membrane characterized by using ATR-FTIR and SEM were investigated. Variables such as pH, time, effect of foreign ions on fluorescence intensity in the presence of As(III) ion have been systematically investigated. With the developed method, the As(III) can be determined at pH 2, in 20 seconds using the 376 nm excitation and the 422 nm emission wavelength. The linear range of the method is calculated as 6,65×10-9-3,99×10-8 mol L-1 (0,50-2,99 µg L-1) and the detection limit of the method is calculated as 2,33×10-9 mol L-1 (0,173 µg L-1).
Benzer Tezler
- Arsenik baskılanmış manyetik nanopartiküllerin üretimi
Production of arsenic imprinted magnetic nanoparticles
MELİKE ÖZKAYA TÜRKMEN
Doktora
Türkçe
2018
Polimer Bilim ve TeknolojisiHacettepe ÜniversitesiNanoteknoloji ve Nanotıp Ana Bilim Dalı
PROF. DR. ADİL DENİZLİ
- Method development for the determination of trace arsenic
Eser düzeyde arsenik tayini için metot geliştirme
YASEMİN İŞLEK
- Katalitik hidrojen dalgası kullanarak eser arsenik tayini
Determination of trace quantities of arsenic using the catalytic
ZİYA ALMAS
- Katodik sıyırma voltametrisi (CSV) ile arsenik tayini, kemometrik yaklaşım ve uygulamaları
Determination of arsenic by cathodic stripping voltammetry (CSV), chemometric approach and applications
ZEKİ TÜNAY
- Hidrür oluşturma-atomik absorpsiyon spektrofotometrisi (HG-AAS) ile arsenik türlemesi
Speciation of arsenic by hydride generati?on atomic absorption spectrometry (HG-AAS)
RECEP DİKİCİOĞLU
Yüksek Lisans
Türkçe
2013
KimyaMuğla Sıtkı Koçman ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. İBRAHİM KULA