Comparison of shear bond strength and bonding time of metal flash free orthodontic bracket
Başlık çevirisi mevcut değil.
- Tez No: 512326
- Danışmanlar: PROF. MUSTAFA HALUK İŞERİ
- Tez Türü: Yüksek Lisans
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: İngilizce
- Üniversite: İstanbul Yeni Yüzyıl Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Ortodonti Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 72
Özet
Purpose: The purpose of this in vitro study is to compare the shear bond strength and bonding time between metal flash-free brackets and conventional metal brackets. Remaining adhesive following removal of orthodontic brackets was also assessed. Materials and Methods: Forty five intact human premolars (N =45, n = 15 per group) were selected and randomly divided into three groups. Group1: Smart clip brackets used as control group, Group 2: Smart clip APC II flash-free adhesive coated brackets used as first experimental group, Group 3: Smart clip APC plus adhesive coated brackets used as second experimental group. The bonding time was calculated after the teeth were prepared until the brackets placed in the ideal position in seconds. Shear bond strength (SBS) for each sample was measured. Samples were then examined under X 8 magnification light microscopy to assess the remaining adhesive. The shear bond strength, bonding time and remaining adhesive of each group were statistically compared using t-test p
Özet (Çeviri)
Purpose: The purpose of this in vitro study is to compare the shear bond strength and bonding time between metal flash-free brackets and conventional metal brackets. Remaining adhesive following removal of orthodontic brackets was also assessed. Materials and Methods: Forty five intact human premolars (N =45, n = 15 per group) were selected and randomly divided into three groups. Group1: Smart clip brackets used as control group, Group 2: Smart clip APC II flash-free adhesive coated brackets used as first experimental group, Group 3: Smart clip APC plus adhesive coated brackets used as second experimental group. The bonding time was calculated after the teeth were prepared until the brackets placed in the ideal position in seconds. Shear bond strength (SBS) for each sample was measured. Samples were then examined under X 8 magnification light microscopy to assess the remaining adhesive. The shear bond strength, bonding time and remaining adhesive of each group were statistically compared using t-test p
Benzer Tezler
- Işınla sertleşen porselen tamir kompozitleri ile porselen arası bağlantı kuvvetlerinin incelenmesi
An Investigation of bond strength between porcelain and light-cured composite resins which are used in the repair of fractured porcelain restorations
FAZIL İNCEOĞLU
Doktora
Türkçe
1999
Diş HekimliğiGazi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. BÜLENT BEK
- Kron-köprü protezlerinde kıymetsiz metal alaşımı alt yapının rezin materyali ile bağlantısında elektrokimyasal dağlama ve silanla kaplama yöntemlerinin karşılaştırılması
Başlık çevirisi yok
PERVİN İMİRZALIOĞLU
Doktora
Türkçe
1991
Diş HekimliğiGazi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. EROL DEMİREL
- Farklı taban özelliklerine sahip braketlerin bağlanma dayanımlarının in vitro olarak değerlendirilmesi
Evaluation of in vitro the shear bond strength of brackets with different base designs
İPEK CEYLAN AK
Diş Hekimliği Uzmanlık
Türkçe
2017
Diş HekimliğiÇukurova ÜniversitesiOrtodonti Ana Bilim Dalı
YRD. DOÇ. DR. ORUÇ YENER ÇAM
- Braket uygulanmış dişlerin mine yüzeylerinin temizlenmesi için kullanılan yöntemlerin tutuculuk ve yüzey pürüzlülüğü üzerindeki etkisinin incelenmesi.
Evaluation of the effect of enamel surface cleaning methods on shear bond strength and surface roughness of enamel.
AHMET PINAR
Doktora
Türkçe
2009
Diş Hekimliğiİstanbul ÜniversitesiOrtodonti Ana Bilim Dalı
PROF. DR. ELİF FATMA ERBAY
- Farklı üretim teknikleriyle hazırlanmış metal alt yapılar ile üzerlerine pişirilmiş porselenlerin bağ dayanımlarının değerlendirilmesi
Evaluation of bond strength of metal substructures prepared by different production techniques and porcelaines
EBRU NUR IŞIK
Diş Hekimliği Uzmanlık
Türkçe
2017
Diş HekimliğiEge ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. AKIN ALADAĞ