Geri Dön

Ultra ince taneli (spinor a6) süspansiyon enjeksiyonunun, solüsyon türü kimyasal enjeksiyonlara alternatifliğinin araştırılması

Investigation of alternativeness of the ultrafine particle (spinor a6) suspensions grouting as to the solution type chemical grouting

  1. Tez No: 512569
  2. Yazar: EYÜBHAN AVCI
  3. Danışmanlar: PROF. DR. MURAT MOLLAMAHMUTOĞLU
  4. Tez Türü: Doktora
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2015
  8. Dil: Türkçe
  9. Üniversite: Gazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 150

Özet

Bu tez kapsamındaki deneysel çalışmalarda süspansiyon türü cüruf kökenli Spinor A6 ince taneli çimentosu ile solüsyon türü kimyasal enjeksiyon malzemelerinin farklı rölatif sıkılık ve gradasyondaki ince ve orta kum numunelere enjekte edilebilirlikleri ile enjekte edilen numunelerin mukavemet ve permeabilite özellikleri araştırılmıştır. Deneyler iki aşamada yürütülmüştür. İlk aşamada süspansiyon karışımlara ait deneyler yapılmıştır. Su/Çimento oranı 1,0; 1,2; 1,5; 2,0; 2,5, 3,0; 3,5; 4,0 ve 4,5 olan karışımlara sedimantasyon, vicat iğnesi ve viskozite deneyleri yapılarak reolojik özellikler belirlenmiştir. Enjeksiyon deneyleri için en uygun karışım oranları 1,5; 2,0; 2,5; 3,0 ve 3,5 olarak seçilmiş ve bu oranlarda süspansiyon enjeksiyonu deneyleri yapılmıştır. Bu deneylerin yapılması aşamasında karışımlara herhangi bir dispersif sıvı katılmamıştır. Süspansiyon enjeksiyonu deneyinde başarılı olan numuneler kür ortamında bekletilerek 3, 7, 14, 28, 56 ve 150. günlerde serbest basınç deneylerine tabi tutulmuştur. Enjeksiyon deneyi sonrası numuneler düşen seviyeli permeabilite deney düzeneğine yerleştirilerek permeabilite katsayıları (k) ölçülmüştür. İkinci aşamada ise kimyasal solüsyon karışımlarına ait deneyler yapılmıştır. Kimyasal karışımların reolojik özelliklerinin belirlenmesi amacıyla 59 karışım oranında jelleşme süresi, sinerez ve viskozite deneyleri yapılmıştır. Enjeksiyon deneyleri için en uygun sodyum silikat/çözelti oranları % 27, % 36, % 45, % 55 ve % 64 olarak belirlenmiş ve bu karışım oranlarında enjeksiyon deneyleri yapılmıştır. Kimyasal solüsyon enjeksiyonu deneyinde başarılı olan numuneler kür ortamında bekletilerek 3, 7, 14, 28, 56 ve 150. günlerde serbest basınç deneylerine tabi tutulmuştur. Kimyasal solüsyon enjeksiyonu sonrası numuneler düşen seviyeli permeabilite deney düzeneğine yerleştirilerek permeabilite katsayıları (k) ölçülmüştür. Yapılan tüm deneysel çalışmalar Spinor A6 süspansiyon enjeksiyonunun, solüsyon türü kimyasal enjeksiyonlara alternatif bir malzeme olduğunu göstermiştir.

Özet (Çeviri)

In the scope of this thesis, the groutability of slag based suspension type microfine cement and the solution type chemical injection materials into the fine to medium sand samples with different relative density and gradations were investigated. In addition, the unconfined compressive strength as well as the permeability properties of the injected samples were studied. The experiments were conducted in two stages. In the first stage, the tests were run with the suspension mixtures. The sedimentation, the vicat needle and viscosity tests were performed with the water / cement ratios of 1.0; 1.2; 1.5; 2.0; 2.5, 3.0; 3.5; 4.0 and 4.5 and the rheological properties were determined. The optimum water / cement ratios for injection tests were chosen as 1.5; 2.0; 2.5; 3.0 and 3.5, with which the injection tests were carried out. No dispersive agent was added to the mixtures during these tests. The samples grouted successfully were kept in the curing environment and subjected to unconfined compression test after 3, 7, 14, 28, 56 and 150 days later. After grouting, the samples were also subjected to the falling-head permeability tests and their permeability coefficients (k) were measured. Similar tests related to the chemical solution grouts were preformed at the second stage. The gelation time, syneresis and viscosity tests were conducted on 59 samples with different mixing ratios in order to determine the rheological properties of the chemical grouts. The most suitable ratios of the sodium silicate / reactant solutions were determined as 27%, 36%, 45%, 55% and 64% and all chemical grouting tests were conducted regarding these values. The successfully injected sand samples with the solution type chemical grouts were retained in the curing environment and subjected to unconfined compression tests after 3, 7, 14, 28, 56 and 150 days later. Chemically grouted sand samples were also subjected to the falling-head permeameter tests and their permeability coefficients (k) were measured. As a result of all experimental studies it might be be concluded that the Spinor A6 suspension grouting is a promising alternative material to those of solution type of sodium silicate grouts.

Benzer Tezler

  1. Ultra ince taneli ve mikroalaşımlı TRIP katkılı çeliklerin üretimi ve çok fazlı mikroyapı tasarımı

    Ultra fine grained microalloyed TRIP assisted steels production and multiphase microstructure design

    YUNUS EMRE SÖZER

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Metalurji MühendisliğiKocaeli Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ERSOY ERİŞİR

  2. Ultra ince taneli saf titanyumun farklı yüzey yöntemleri ile oksidasyonu

    The oxidation of ultra-fine grain pure titanium by using different surface processes

    İLHAN ÇELİK

    Yüksek Lisans

    Türkçe

    Türkçe

    2010

    Makine MühendisliğiAtatürk Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AKGÜN ALSARAN

  3. Eşit kanallı açısal presleme yönteminde kanal açılarının deformasyona etkisinin sonlu elemanlar yöntemiyle incelenmesi

    Investigation of the effect of channel angles on deformation in equal channel angle pressing method by finite element method

    FERUDUN DARICI

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Makine MühendisliğiZonguldak Bülent Ecevit Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ OĞUZ KOÇAR

  4. İnce taneli çimentonun jet grout kolonların performansı üzerindeki etkilerinin deneysel olarak araştırılması

    Experimentally investigation of effects on the performance of jet grout columns with fine grained cement

    BEKİR FİDAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    İnşaat MühendisliğiSelçuk Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ÖZCAN TAN

  5. Aşırı plastik deformasyonun seramik parçacık takviyeli alüminyum alaşımının mekanik özelliklerine etkisinin incelenmesi

    Investigation of the effect of severe plastic deformation on the mechanical properties of ceramic particle reinforced aluminium alloy

    SAMAN AHMADZADEH

    Yüksek Lisans

    Türkçe

    Türkçe

    2014

    Makine MühendisliğiGazi Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ÖMER KELEŞ

    PROF. DR. NECİP CAMUŞCU