Geri Dön

Isı pompasında ejektör yardımı ile ısıtma kapasitesi ve etkinliğinin artırılması

Heating capacity and efficiency increasing with ejector assembly in heat pump

  1. Tez No: 521835
  2. Yazar: İSMAİL GÜNDÜ
  3. Danışmanlar: DR. ÖĞR. ÜYESİ ERTUĞRUL CİHAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2018
  8. Dil: Türkçe
  9. Üniversite: Osmaniye Korkut Ata Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 63

Özet

Bu çalışmada, bilinen ve mahal ısıtmasında yaygın olarak kullanılan ters Carnot prensibine göre çalışan buhar sıkıştırmalı klasik bir ısı pompasına ilave edilen bir sıvı pompası ve ejektör ilavesi ile ısıtma kapasitesi ve ısıtma etkinliğinin artırılması araştırılmıştır. Hesaplamalarda tek ve çift ejektör ile çalışan iki farklı sistem modellenmiştir. Sıvı pompası ile akışkan basıncı artırılırken ejektör kompresör çıkış basıncını alt seviyelerde tutmakta böylece kompresörün klasik sisteme göre harcadığı enerjiyi azaltabilmektedir. Böylece ısıtma etkinlik katsayısı artmakta olup, ısıtma kapasitesi ve etkinliğin artırılması ile daha az enerji harcayan ve klasik sistemlere göre cihaz boyutlarının küçülmesinden dolayısıyla maliyet avantajının da sağlaması gerçekleştirilebilecektir.

Özet (Çeviri)

In this study, the effect of heating capacity and heating efficiency were investigated with the help of a liquid pump and an ejector added to a conventional condensing heat pump operating according to the inverse Carnot principle commonly used in room heating. Two different systems working with single and double ejectors are modeled in the calculations. With the fluid pump increasing the fluid pressure, the ejector keeps the compressor outlet pressure at the lower levels, thus reducing the compressor's energy consumption compared to the conventional system. Thus, the heating efficiency coefficient is increased, the heating capacity and the efficiency can be increased so that the cost advantage can be realized by using less energy and reducing the size of the device according to the conventional systems.

Benzer Tezler

  1. Enjektörlü ısı pompasının incelenmesi

    Investigation of an ejector heat pump

    H. KÜRŞAT ERSOY

    Yüksek Lisans

    Türkçe

    Türkçe

    1991

    Makine MühendisliğiSelçuk Üniversitesi

    Makine Ana Bilim Dalı

    DOÇ. DR. KEMAL ALTINIŞIK

  2. Türkiye'nin farklı iklim bölgeleri için güneş ve genleştirici-kompresör destekli iki kaynaklı ısıtma çevriminin uygulanabilirliğinin araştırılması

    Investigation of performance of a solar and expander-compressor enhanced dual-source heat pump for different climate zones of Turkey

    MEHMET CAN TOPAK

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Makine MühendisliğiTarsus Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MEHMET TAHİR ERDİNÇ

  3. Güneş enerjili ısı pompasında grafenli faz değiştiren madde ve nanoakışkan kullanımının deneysel olarak araştırılması

    Experimental investigation of solar assisted heat pump using phase change material and nanofluid with graphene

    SERCAN GÜLCE GÜNGÖR

    Doktora

    Türkçe

    Türkçe

    2024

    EnerjiFırat Üniversitesi

    Enerji Sistemleri Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET ESEN

    PROF. DR. LUISA F. CABEZA

  4. Isı borulu güneş kollektörü destekli ısı pompası

    Heat pump supported by heat pipe solar collector

    HÜSEYİN USTA

    Yüksek Lisans

    Türkçe

    Türkçe

    1988

    Makine MühendisliğiGazi Üniversitesi

    Makine Eğitimi Ana Bilim Dalı

    Y.DOÇ.DR. ALİ Y. UYAREL

  5. Buzda enerji depolama sistemlerinin ısı pompasında ısı kaynağı olarak kullanılmasının termodinamik ve ekonomik açıdan incelenmesi

    Thermodynamic and economic investigation of the use of ice energy storage systems as a heat source in heat pump

    MERVE BULUT

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    EnerjiErciyes Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ DOĞAN ERDEMİR