Geri Dön

İmplant destekli tam protezlerde kullanılan farklı tutucuların retansiyonlarının değerlendirilmesi

Retention of different attachments on implant supported overdenture

  1. Tez No: 536655
  2. Yazar: SELİN ÜMMÜ ÖZSOY UÇAR
  3. Danışmanlar: DOÇ. DR. DERYA ÖZDEMİR DOĞAN
  4. Tez Türü: Diş Hekimliği Uzmanlık
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Locator, Locator R-tx, Retansiyon
  7. Yıl: 2019
  8. Dil: Türkçe
  9. Üniversite: Cumhuriyet Üniversitesi
  10. Enstitü: Diş Hekimliği Fakültesi
  11. Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 110

Özet

Tam dişsizliğin implant destekli tam protezler ile tedavisi protezin retansiyon ve stabilitesini arttırmak, kemiğe dengesiz kuvvet iletimi ve alveol kret kaybı gibi problemleri engellemek, hastanın hayat kalitesini arttırmak amacıyla tercih edilmektedir. Çalışmamızın amacı implant destekli tam protezlerde sıklıkla kullanılan locator® (Zest Anchors, Escondido, CA, ABD) tutucu ve yeni piyasaya sürülmüş locator R-tx® (Zest Anchors, Escondido, CA, ABD) tutucunun belli kullanım sikluslarından sonra retansiyon değerlerinin karşılaştırılmasıdır. Çalışmamızda Locator® (Zest Anchors, Escondido, CA, ABD) ve Locator R-tx® (Zest Anchors, Escondido, CA, ABD) tutucular bloklara 2'şerli olarak biri dik biri bukkolingual yönde 250 açılı olacak şekilde yerleştirilip, 25 N ile torklanmıştır. İçlerinde laboratuvar lastikleri bulunan metal matriksleri ile bağlanmıştır. Laboratuvar lastikleri pembe lastikler ile değiştirilerek başlangıç retansiyon değerleri Instron test cihazında (Instron® 3300 , Illinois, ABD) ölçülmüştür. Ölçümden sonra örnekler termal sikluslu çiğneme similatorüne (SD Mechatronik CS-4, Westerham, Almanya) bağlanarak takma çıkarma siklusları yapılmıştır. Protezlerin günde 4 kez takılıp çıkarıldığı varsayılarak 120.(1 aylık kullanım),360.(3 aylık kullanım),720.(6 aylık kullanım) ve 1440.(1 yıllık kullanım) sikluslarda Instron test cihazında (Instron® 3300 , Illinois, ABD) retansiyon değerleri ölçülerek veriler karşılaştırılmıştır. 1440 siklus sonunda hem farklı dizaynlardaki dayanaklar hemde lastikler taramalı elektron mikroskobuyla bakılarak aşınmaları değerlendirilmiştir. Sonuç olarak, her iki tutucunun da lastiklerinde retansiyon kaybı ve yıpranma gözlenirken; tutucular arasında ilk retansiyon, 120.siklustaki (1 aylık kullanım) retansiyon, 1440.siklustaki (1 yıllık kullanım) retansiyon değerleri arasında anlamlı bir farklılık olduğu belirlenmiştir (p0,05) Locator tutucuda, Locator R-tx tutucuya göre retansiyon değerleri düşük bulunmuştur.

Özet (Çeviri)

For years, the quality of edentulous patients' life rehabilitated with complete removable prostheses has been compromised by the overdenture's lack of stability and retention on the alveolar process, particularly in the mandibular arch. A first-choice standard of care for treating edentulous patients: overdentures supported by two osseointegrated implants placed in canine position and retained by an attachment system. The performance of the implant-retained overdentures depends on prosthesis stability and the retentive capacity of attachment system. In this study, we evaluated the retention of the locator® (Zest Anchors, Escondido, CA, ABD) which is frequently used and the locator R-tx® (Zest Anchors, Escondido, CA, ABD) which is newly put on the market. We placed the locator's and locator R-tx's as it will be a pair on each block, one is vertical the other is angulated at 250. The abutments were torqued with 25 N. Each of the acrylic blocks with the abutments were coupled to the other acrylic resin blocks for housings. First retention was measured using Instron testing machine (Instron® 3300 , Illinois, ABD). Then, the blocks mounted in a chewing simulator (SD Mechatronik CS-4, Westerham, Almanya) with thermal cycling for insertion-removal cycles at 1440 cycles for simulating for one-year usage. Retention also was measured at 120.cycles which equals 1 month usage and its corresponded by 4 times a day ,360.cycles(3 month usage),720.cycles(6 month usage) and 1440(1 year usage) with the Instron testing machine (Instron® 3300 , Illinois, ABD). The data was analyzed statiscally. Also the most eroded abutments and males were examined by scanning electron microscopy. According to the results, retention decreased in all groups during the insertion-removal cycles and the difference between groups in 3.month and 6.month were not significant (p>0,05). The difference between groups on first retention, in 1.month and 1.year were significant (p

Benzer Tezler

  1. İmplant destekli hareketli protezlerin retansiyonunda kullanılan top başlı ve locator özellikli non-splint overdenture ataşmanların mekanik ve fiziksel özelliklerinin yapay yaşlandırma altındaki değişimine etkilerinin in-vitro değerlendirmesi

    In-vitro evaluation of the effects of mechanical and physical properties of ball-head and locator nonspinning overdenture attachments used in the retention of implant-supported removable prostheses on the change of their mechanical and physical properties under artificial aging

    EGEMEN SEZEN

    Doktora

    Türkçe

    Türkçe

    2023

    Diş Hekimliğiİstanbul Aydın Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. HÜSEYİN MEHMET KURTULMUŞ

  2. İmplant destekli hareketli protezlerde kullanılan farklı yüzey özelliklerine sahip locator tutucuların aşınmalarının ve tutuculuk kuvvetlerinin değerlendirilmesi

    Evaluation of wear and retention forces of locator attachments with different surface properties used in implant supported overdenture

    MERVE DEDE

    Doktora

    Türkçe

    Türkçe

    2020

    Diş Hekimliğiİstanbul Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. FATMA ÜNALAN

  3. İki farklı implant yüzeyinin kemik içi stabilite ve krestal kemik kayıpları uzerine etkilerinin; iki farklı abutment tipinin hasta memnuniyetlerinin karşılaştırılması

    Comparison of the effects of two different dental implant surfaces on stability and crestal bone resorption and comparison of patient satisfaction of two different abutment types

    ONUR GEÇKİLİ

    Doktora

    Türkçe

    Türkçe

    2007

    Diş Hekimliğiİstanbul Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. TAYFUN BİLGİN

  4. Mandibuler implant tutuculu overdenture uygulamalarında, kısa implantların ve tutucu tiplerinin farklı kemik dansiteleri üzerinde oluşturacağı streslerin üç boyutlu sonlu elemanlar stres analiz yöntemi ile biyomekanik olarak incelenmesi

    Biomechanical investigation of stress caused by short implants and retainer types on different bone densities in mandibular implant retained overdenture applications by THREE-dimensional finite element stress analysis method

    GİZEM KILIÇ

    Doktora

    Türkçe

    Türkçe

    2022

    Diş HekimliğiAnkara Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. SEMİH BERKSUN

  5. İmplant destekli hareketli protezlerde kullanılan 3 farklı hassas tutucunun tutuculuk kuvvetlerinin ve aşınma derecelerinin değerlendirilmesi

    The evaluation of the retentional forces and weardegrees of 3 different precision attachments used forimplant supported removable dentures

    VOLKAN SOYLU

    Doktora

    Türkçe

    Türkçe

    2023

    Diş Hekimliğiİstanbul Medipol Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. HANEFİ KURT