İnokulant üretiminde kullanılan kalite kontrol kriterlerinin irdelenmesi ve ülkemiz için model kriterin belirlenmesi
The Comparision of quality control systems of inoculant production and determination of a national model system
- Tez No: 5809
- Danışmanlar: PROF. DR. VELİTTİN GÜRGÜN
- Tez Türü: Yüksek Lisans
- Konular: Gıda Mühendisliği, Food Engineering
- Anahtar Kelimeler: Bradyrhizobium japonicum sayım teknikle rinin karşılaştırılması, damla kültür, dökme kültür, en muhtemel sayı, Breed, Mc-Farland standart sayım yöntemleri, Comparision of counting techniques of Brady rhizobium japonicum, drop count technique, pour plate count, most probable number technique, Breed technique, Mc-Farland standart count tecnique
- Yıl: 1988
- Dil: Türkçe
- Üniversite: Ankara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Tarım Ürünleri Teknolojisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
IX ÖZET Yüksek Lisans Tezi ÎNOKULANT ÜRETİMİNDE KULLANILAN KALİTE KONTROL KRİTERLERİNİN İRDELENMESİ VE ÜLKEMİZ İÇİN MODEL KRİTERİN BELİRLENMESİ H. Fikret DEMİRDÖ?EN Ankara üniversitesi Fen Bilimleri Enstitüsü Tarım Ürünleri Teknolojisi Anabilim Dalı Danışman: Prof.Dr. Velittin GÜRGÜN 1988, Sayfa: 32 Jüri: Prof. Dr. Velittin GÜRGÜN Doç. Dr. Kor ay HAKTANIR Doç. Dr. Mustafa ÖZÎLGEN 1- Sıvı kültürdeki bakteri sayılarının belirlenme sinde Breed, damla kültürü ve Mc-Farland yöntemleri, inoku lantta ise damla kültürü, dökme kültürü ve bitki infeksiyo nuna dayalı EMS yöntemleri kullanılmıştır. 2- Sıvı kültürdeki bakteri sayımında kullanılan yöntemler arasında günlere göre belli bir istatistiki kore lasyon saptanamamıştır. Damla kültür ve Mc-Farland yöntem leri ile elde edilen sayılar birbirine çok yakın bulunmuş olup, çabuk sonuç almada Mc-Farland yönteminin kullanılabi leceği ve bu taktirde de sonucun 1,2 'ye bölünmesi gerekece ği sonucuna varılmıştır. 3- İnokulanttaki canlı Bradyrhizobium sayısının be lirlenmesinde kullanılan 3 yöntem arasında %1 düzeyinde önem li korelasyon saptanmış olup damla kültürü ile elde edilen sayılar diğerlerinden daha yüksek bulunmuştur. Buna göre dök me kültür yöntemiyle elde edilen sayılar, EMS yöntemiyle el de edilen sayılardan 1,83, damla kültürü ile elde edilen sa yılar da 2,1 defa daha fazla bulunmuştur.
Özet (Çeviri)
Ill ABSTRACT Masters Thesis THE COMPARISION OF QUALITY CONTROL SYSTEMS OF INOCULANT PRODUCTION AND DETERMINATION OF A INATIONAL MODEL SYSTEM H. Fikret DEMÎRDÖ?EN Ankara University Graduate School of Natural and Applied Sciences Department of Agricultural Products Technology Supervisor: Assoc. Prof.Dr. Velittin GÜRGÜN 1988, Page: 32 Jury: -Prof.Dr. Velittin GÜRGÜN Assoc. Prof. Koray HAKTANIR Assoc. Prof. Mustafa ÖZÎLGEN 1. To determine the bacterial count in liquid cul tures of Rhizobia, the methods of Breed, Drop count and Mc-Farland and in inoculants Drop count, Pour plate and Most Probable Number (MPN) technique based on plant infec tion test were used. 2. There was no statistical correlation between the methods, which were used to determine the bacterial counts in liquid cultures during the growth period. Though the similarity between the results of drop count and Mc-Farland methods, the second one could be replaced instead of drop count technique, because it is more simple and faster method. In that case, the results of Mc-Farland method must be corrected by dividing to 1,2. 3. There was a significant correlation at 1% level between the viable Bradyrhizobium counts in inoculants which were obtained by 3 different methods. The counts of drop count technique were higher than others. To convert of the results of pour plate and drop count tecniques to MPN, they must be divided by 1,83 and 2,1 respectively.
Benzer Tezler
- Tavşanlarda peritoneal ve plevral kavitelerde deneysel kist hidatik oluşturulması
Başlık çevirisi yok
KADİR KAZEZ
- Alaşım elementlerinin gri dökme demir mikro yapısı ve mekanik özelliklerine etkisi
Effect of alloy elements on the microstructure and mechanical properties of gray cast iron
HOSSAİN ASLANİ
Yüksek Lisans
Türkçe
1989
Metalurji MühendisliğiGazi ÜniversitesiMetal Eğitimi Ana Bilim Dalı
PROF. DR. Ö. ERTUĞRUL ATASOY
- Bakteri (Rhiozobium ssp.) aşılama, azot dozları ve ekim sıklığının nohut (Cicer arietinum L.)un verim ve verim unsurlarına etkileri
The Effects of inoculation (rhizobium ssp.) nitrogen application and plant density on the yield and yield components of chickpea (cicer arietinum L.)
CEVDET AKDAĞ
- Mikrobiyal aşı uygulamasında kullanılan seçilmiş rhizobium japonicum suşlarının nodülasyon rekabet yeteneklerinin serolojik yöntemler kullanılarak belirlenmesi
The Determination of the competitive ability for nodulation of selected rhizobium Japonicum strains that are used in microbial inoculum application, by serological methods
NESİME CEBEL
- Aşılayıcı tane büyüklüğü ve miktarının gri dökme demirde mikro yapı ve mekanik özelliklere etkisi
Effect of size and amount of inoculant on micro structure and mechanical properties in gray iron
MUSTAFA KÖROĞLU
Yüksek Lisans
Türkçe
1989
Metalurji MühendisliğiGazi ÜniversitesiMetalurji Eğitimi Ana Bilim Dalı
PROF. DR. ERTUĞRUL ATASOY