Gerçek zamanlı hibrit montaj hattı dengeleme ve imalat sektöründe bir uygulama
Real time hybrid installation line balancing and manufacturing application
- Tez No: 620667
- Danışmanlar: DR. ÖĞR. ÜYESİ ALPER GÖKSU
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Montaj hattı dengeleme, yapay sinir ağı, benzetim İmalat sistemindeki çeşitli zorluklar ele alınmıştır. Makinaların bozulması
- Yıl: 2020
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 67
Özet
Özet yok.
Özet (Çeviri)
Keywords – Line balancing, neural network, simulation. Variations, in the manufacturing system, are hard tackle. Breakdowns of machines, variable labour time, poor quality production, and labour mistakes can cause the variation of manufacturing time. The variation of time may change the cycle time, and increase the loss of balance in manufacturing line. To avoid the problem, a dynamic line-balancing method should be applied. The time the line-balancing method intervenes the manufacturing line is crucial for prevention against loss of balance. If the re-balancing process is preformed at the time when a problem occurs, only slack-time of next stations can be used. However, when the problem is predicted, the total slack-time of the manufacturing line can be taken advantage of. If the method can achieve to complete manufacturing in slack-time, which makes the method real-time, there will be no loss. In the study, a real-time assembly line balancing method is developed. An artificial intelligence model and statistical estimations are integrated to the model for prediction of the problem occurrence and duration.
Benzer Tezler
- Paint shop scheduling in a bus plant: Re-entrant hybrid flow shop model with zero buffer and no-wait stations
Otobüs fabrikasında boyahane çizelgelemesi: Sıfır ara depolama ve beklemesiz istasyon; döngülü hibrit akış tipi modeli
EBRU VEYSEL
Yüksek Lisans
İngilizce
2019
Endüstri ve Endüstri MühendisliğiBoğaziçi ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALİ TAMER ÜNAL
- Montaj operasyonlarında operatör verimliliğinin yapay zekâ temelli görüntü izleme ile iyileştirilmesine yönelik bir endüstri 4.0 yaklaşımı
An Industry 4.0 Approach to Improve Operator Efficiency in Assembly Operations with AI-Based Image Tracking
ÖZNUR AY CEYLAN
Doktora
Türkçe
2025
Endüstri ve Endüstri MühendisliğiBursa Uludağ ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. ERDAL EMEL
- Hatalı yerleştirilen araç sigortalarının şablon eşleştirme yöntemiyle tespiti
Detection of misplaced vehicle fuses using template matching method
MUSTAFA KARAKURT
Yüksek Lisans
Türkçe
2024
Elektrik ve Elektronik MühendisliğiSakarya ÜniversitesiElektrik ve Elektronik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ AHMET KÜÇÜKER
- Bir e-ticaret sağlayıcısının topla-dağıt araç rotalama problemi için çözüm yaklaşımları
Solution approaches for the simultaneous pickup and delivery vehicle routing problem of an e-commerce provider
GÖKHAN ABİK
Yüksek Lisans
Türkçe
2025
Endüstri ve Endüstri MühendisliğiErciyes ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. BANU SOYLU
- Force control of Stäubli RX-160 manipulator
Stäubli RX-160 manipülatörünün kuvvet kontrolü
SERHAT AKBAŞ
Yüksek Lisans
İngilizce
2015
Mekatronik Mühendisliğiİstanbul Teknik ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. ZEKİ YAĞIZ BAYRAKTAROĞLU