Geri Dön

Direkt ve indirekt kompozit yüzeylere metal braketlerin bağlanma dayanıklılığının değerlendirilmesi

Evaluation of shear bond strength of metal brackets on direct and indirect composite surfaces

  1. Tez No: 629822
  2. Yazar: MEHMET DENİZ
  3. Danışmanlar: DR. ÖĞR. ÜYESİ EMİRE AYBÜKE ERDUR
  4. Tez Türü: Diş Hekimliği Uzmanlık
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2020
  8. Dil: Türkçe
  9. Üniversite: Necmettin Erbakan Üniversitesi
  10. Enstitü: Diş Hekimliği Fakültesi
  11. Ana Bilim Dalı: Ortodonti Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 104

Özet

Bu çalışmada, farklı kompozit yüzeylere (direkt ve indirekt) uygulanan pürüzlendirme yöntemleriyle yüzeyde oluşan pürüzlülük ve metal braketlerin bağlanma dayanıklılığı üzerine olan etkisinin değerlendirilmesi amaçlandı. Çalışmamıza direkt ve indirekt olmak üzere 2 farklı tipte kompozit ve alt kesici diş dâhil edildi. Bu amaçla kompozit grupların her birinden 60 adet olmak üzere toplamda 120 örnek disk üretici firmanın talimatlarına göre hazırlandı ve bu örneklere 15 adet alt kesici diş eklendi. Bütün kompozit disklerin yüzey pürüzlülüğü profilometre cihazı ile yüzeyler pürüzlendirilmeden önce ve sonra değerlendirildi. Kompozit yüzeylere ortofosforik (OF) asit, kumlama ve frez, diş yüzeylerine ise OF asit uygulandı. Braketler yapıştırıldıktan sonra, termal siklus işlemi uygulanan yüzeyler, makaslama testine tabi tutuldu. Yüzeyde oluşan değişiklikler stereomikroskop ve SEM analizleri ile incelendi. İstatiksel değerlendirme için, iki yönlü varyans analizi (ANOVA), Tukey HSD ve Bağımlı Örneklem T testleri kullanıldı. Çalışmamızda kullanılan kumlama ile pürüzlendirme yönteminin direkt kompozit pürüzlülük değerlerinin, indirekt gruptaki değerlerden anlamlı derecede daha düşük iken diğer pürüzlendirme teknikleri (OF asit, frez) için direkt ve indirekt kompozit tipleri arasında istatiksel olarak fark bulunamadı (p>0.05). Frezle pürüzlendirme yöntemi, hem bağlanma dayanımı, hem de yüzey pürüzlülüğü değerlerinde en yüksek sonuçları gösterdi (p

Özet (Çeviri)

The aims of the present study were to evaluate the effects of roughening techniques on the shear bond strength of metal brackets and the surface roughness of different composite (direct and indirect) surfaces. In total, 120 composite discs including 60 from each group were prepared according to the manufacturers' instructions and 15 lower incisor teeth were included in these groups. All composite discs were evaluated using a profilometer before and after roughening the surfaces. In each composite group, the following three subgroups were prepared: orthophosphoric acid, sandblasting and diamond burr, teeth group was prepared with orthophosphoric acid. After brackets were bonded, the samples were stored in thermocycled. Shear bond strength testing was performed and failure modes were classified. The surface roughness of the composite discs was evaluated with SEM analysis. Data were analyzed using the paired sample t test (p0.05). The diamond burr was associated with the highest mean roughness value and shear bond strength results. SEM images of the composite surfaces treated confirmed that the diamond burr-treated surfaces had the highest degree of irregularity (p< 0.05). Within the limitations of this study, the diamond burr yielded the highest surface roughness and could be an alternative composite surface treatment to increase bond strength.

Benzer Tezler

  1. Restorasyonların tamirlerinde farklı yüzey hazırlanmasının, materyal ve bağlayıcı sistem kullanımının makas dayanımı üzerine etkisinin in vitro araştırılması.

    The effects of using different surface treatments and bonding systems on shear bond strength of repaired restorations.

    MURAT TİRYAKİ

    Doktora

    Türkçe

    Türkçe

    2010

    Diş Hekimliğiİstanbul Üniversitesi

    Diş Hastalıkları ve Tedavisi Ana Bilim Dalı

    PROF. DR. FATMA KORAY

  2. Self-adeziv rezin simanlarla yapıştırılan seromerlerin dentin yüzeyine bağlantısının incelenmesi

    Evaluation of bond strengths of ceromers luted by self-adhesive resin cements to dentin

    MERAL DURKAN

    Doktora

    Türkçe

    Türkçe

    2007

    Diş HekimliğiMarmara Üniversitesi

    Diş Hastalıkları ve Tedavisi Ana Bilim Dalı

    DOÇ.DR. CAFER TÜRKMEN

  3. Gingival kenar lokasyonunun indirekt kompozit rezin restorasyon ve direkt bulk-fill kompozit rezin restorasyon uygulamalarında mikrosızıntıya etkisi

    The effect of gingival marginal location on microleakage in indirect composite resin and direct bulk-fill composite resin restoration applications

    ESRA EHLİZ

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2017

    Diş HekimliğiAfyon Kocatepe Üniversitesi

    Restoratif Diş Tedavisi Ana Bilim Dalı

    YRD. DOÇ. DR. ÖZGÜR KANIK

  4. İndirekt reçine kompozit materyalleri ile farklı tip yapıştırma sistemleri arasındaki bağlantı kuvvetinin in-vitro olarak incelenmesi

    In-vitro i̇nvestigation of the bond strength between different i̇ndirect resin composite materials and different types of bonding systems

    OYUN ERDENE BATGEREL

    Doktora

    Türkçe

    Türkçe

    2022

    Diş Hekimliğiİstanbul Üniversitesi

    Restoratif Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. OKTAY YAZICIOĞLU

  5. İnley restorasyonların kavite duvarına adaptasyonu ve mikrosızıntısı üzerine kavite preparasyon tekniklerinin ve farklı materyallerinin kullanımının etkisi

    The effect of cavity preparation techniques and different materials on the marginal adaptation and microleakage of inlay restorations

    İLKNUR ÜNLÜ

    Doktora

    Türkçe

    Türkçe

    2006

    Diş HekimliğiGazi Üniversitesi

    Diş Hastalıkları ve Tedavisi Ana Bilim Dalı

    PROF.DR. OYA BALA