A Systematic study to investigate the effect of concentration on flow boiling heat transfer characterisics in water ethylene glycol system
Başlık çevirisi mevcut değil.
- Tez No: 654305
- Danışmanlar: PROF. DR. SATISH G. KANDLIKAR
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1999
- Dil: İngilizce
- Üniversite: Rochester Institute of Technology
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 84
Özet
Özet yok.
Özet (Çeviri)
Mixtures of ethylene glycol and water are employed in cooling engines in automotive applications. To avoid two-phase flow in the engine, the mixture is subcooled in the radiator before entering the engine block. Heat transfer is therefore essentially under subcooled flow boiling conditions. Very little information is available in the literature on the subcooled flow boiling (flow boiling with subcooled liquid) characteristics of this mixture and there are no predictive methods established in this region. In the present investigation heat transfer in the nucleate flow boiling of dilute aqueous binary mixtures was measured and experimental data were compared with available correlating methods developed for binary mixtures. The concentration range from pure water to 40 percent ethylene glycol solution is tested under these conditions. Eighteen different concentrations have been investigated. Liquids were boiled at atmospheric pressure on a rectangular flow channel. The experimental set up consists of a 9.5 mm circular heater placed on the lower wall of a 3 mm x 40 mm horizontal channel. The results indicate that increasing the concentration of ethylene-glycol in water deteriorates the heat transfer coefficients as compared to the case of pure water at the same wall superheat.
Benzer Tezler
- Bor minerallerinin elektrostatik ve elektrokinetik özellikleri
Electrostatic and electrokinetic properties of boron minerals
EMRE YAŞAR
Yüksek Lisans
Türkçe
1994
Maden Mühendisliği ve Madencilikİstanbul Teknik ÜniversitesiPROF.DR. YALÇIN KAYTAZ
- Electrochemical investigations on functionalized 2D graphene, molybdenum disulfide, and nickel sulfide
2 boyutlu işlevselleştirilmiş grafen, molibden disülfit, ve nikel sülfit üzerinde elektrokimyasal araştırmalar
NAVID SOLATI ESKANDAR
Doktora
İngilizce
2022
KimyaKoç ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. SARP KAYA
- Design of biopolymer-based advanced functional materials
Biyopolimer esaslı gelişmiş fonksiyonel malzemelerin tasarımı
SENA ÇİFTBUDAK
Yüksek Lisans
İngilizce
2022
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. NERMİN ORAKDÖĞEN
- Aktif çamurda çoklu substrat gideriminin modellenmesi
Modelling of multiple substrate removal in activated suludge process
GÜLEN EREMEKTAR
Doktora
Türkçe
1997
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. OLCAY TÜNAY
- 6063 aluminyum alaşımlarının korozyon direnci üzerine anodizasyon öncesi yüzey işlemlerinin ve AA anodizasyonla üretilmiş ince oksit filmlerinin etkisi
The Effect of pretreatment and thin layer sulfuric acid a C anodization of 6063 aluminum alloys on its corrosion resistance
FERİHA SERTÇELİK