Geri Dön

Elektrodepozisyon yöntemi ile üretilen ve güneş pili üretimine uygun olan CdSe/PbS hetero yapıların bazı fiziksel özellikleri

Some physcal propecties of the CdSe/PbS hetero structures produced by the electrodeposition method and suitable for solar cell production

  1. Tez No: 666430
  2. Yazar: FERMAN YAVUZ
  3. Danışmanlar: DOÇ. DR. AYÇA KIYAK YILDIRIM
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2021
  8. Dil: Türkçe
  9. Üniversite: Bilecik Şeyh Edebali Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Enerji Sistemleri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 92

Özet

Bu çalışmada, CdSe/ PbS yarıiletken hetero filmleri elektrokimyasal depozisyon yöntemi ile elde edilmiştir. Filmlerin üretimi dört ana grup altında gerçekleştirilmiştir. Birinci grupta, çözelti pH'nın CdSe film üzerindeki etkileri araştırılmıştır. İkinci grupta, deneyler farklı pH değerlerinde ancak depozisyon sıcaklığı 80°𝐶' ayarlanarak gerçekleştirilmiştir. ve manyetik alanın etkileri incelenmiştir. Üçüncü grupta, farklı güce sahip asitler kullanılarak en uygun pH değeri ayarlanarak CdSe ince filmleri üretilmiştir. Dördüncü grupta, farklı katodik potansiyel değerlerinde PbS ince filmleri üretilmiştir. Elde edilen bütün filmlerin optik özellikleri, UV-VIS cihazı kullanılarak dalga boyuna karşı absorbans ölçümlerinden elde edilmiştir. Filmlerin yapısal özellikleri XRD cihazı ile belirlenmiştir. Filmlerin morfolojik ve elementsel analizleri SEM-EDX cihazı ile araştırılmıştır. Güneş pili üretimi için optimum şartları sağlayan CdSe ve PbS ince filmleri üst üste üretilerek hetoro yapı oluşturulmuştur.

Özet (Çeviri)

In this study, CdSe / PbS semiconductor hetero films were obtained by electrochemical deposition method. Films were produced under four main groups. In the first group, the effects of solution pH on the CdSe film were investigated. In the second group, experiments were carried out at different pH values, but by adjusting the deposition temperature to 80 ° C. In the third group, CdSe thin films were produced by using acids with different strengths and adjusting the optimum pH value. In the fourth group, PbS thin films with different cathodic potential values were produced. The optical properties of all films obtained were obtained from the absorbance measurements against wavelength using the UV-VIS device. The structural properties of the films were determined by XRD device. Morphological and elemental analysis of the films were investigated with SEM-EDX device. CdSe and PbS thin films, which provide optimum conditions for solar cell production, were produced on top of each other and a hetero-structure was formed.

Benzer Tezler

  1. CdS filmlerinin elektrodepozisyon ile üretiminde depozisyon potansiyeli ve elektrot pozisyonlarının etkileri

    The effects of deposition potential and electrodeposition positions on the production of CdS films by electrodeposition

    AKIN KENİŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Mühendislik BilimleriBilecik Şeyh Edebali Üniversitesi

    Enerji Sistemleri Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AYÇA KIYAK YILDIRIM

  2. Elektrodepozisyon yoluyla elde edilmiş olan ni/n-GaAs schottky diyotlarının elektriksel ve optik özelliklerinin incelenmesi

    Investigation of the electrical and optical properties of ni/n-GaAs schottky diodes obtained by electrodeposition

    TUĞÇE BATMAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Fizik ve Fizik MühendisliğiBursa Uludağ Üniversitesi

    Fizik Ana Bilim Dalı

    PROF. DR. MUHİTDİN AHMETOĞLU

  3. Improvement of the integrity of self standing nickel nanowire structures produced with AAO template method

    AAO şablon metodu ile üretilen kendi kendini taşıyan nikel nanotellerin bütünlüğünün iyileştirilmesi

    ÖZDEN GÜNEŞ YILDIZ

    Yüksek Lisans

    İngilizce

    İngilizce

    2021

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. MUSTAFA KAMİL ÜRGEN

  4. Elektrobiriktirme yöntemi ile üretilen n-CdTe ve p-CdTe yarıiletkenlerin özelliklerinin incelenmesi

    Investigation of the properties of n-CdTe and p-CdTe semiconductors produced by electrodeposition method

    BENGİ BİNGÖL

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    EnerjiTekirdağ Namık Kemal Üniversitesi

    Fizik Ana Bilim Dalı

    DOÇ. DR. KADİR ERTÜRK

  5. Elektrokimyasal yöntemle indirgenmiş grafen oksit/titanyum dioksit yüzeyinin alüminyum ile doplanması, kapasitif ve fotokatalitik özelliklerinin incelenmesi

    Doping of electrochemically reduced graphene oxide/titanium dioxide surface with aluminum and investigation of its capacitive and photocatalytic properties

    EBRU TURGUT HİM

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    EnerjiGebze Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. ÜMİT DEMİR