Yüksek frekans indüksiyon boru üretiminde proses parametrelerinin kaynak kalitesi üzerindeki etkileri
The Effect of process parameters on welding quality in the high frequency induction pipe welding process
- Tez No: 67052
- Danışmanlar: DOÇ. DR. ERDİNÇ KALUÇ
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Yüksek Frekans (YF), îndüksiyon Boru Kaynağı
- Yıl: 1997
- Dil: Türkçe
- Üniversite: Kocaeli Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Konstrüksiyon ve İmalat Bilim Dalı
- Sayfa Sayısı: 87
Özet
YÜKSEK FREKANS İNDÜKSİYON BORU ÜRETİMİNDE PROSES PARAMETRELERİNİN KAYNAK KALİTESİ ÜZERİNDEKİ ETKİLERİ Kahraman ŞİRİN
Özet (Çeviri)
THE EFFECT OF PROCESS PARAMETERS ON WELDING QUALITY IN THE HIGH FREQUENCY INDUCTION PIPE WELDING PROCESS Kahraman ŞİRİN Keywords : High Frequency (HF), Induction Pipe Welding Abstract ; Because of the technological development, expectations from the performance of steel pipes is greatly increasing. Since high frequency ERW tubes are excellent in dimensional accuracy, surface quality and low in production cost, they have been easily matched with this increasing demand and also used various purposes. Nowadays, high frequency induction welding allows to produce pipes, until 650 mm in diameter and 25 mm wall thickness. In that process, firstly the tube is formed, called as open pipe from metal strip in a continuos roll-forming mill and than enters the weld area. Before welding, HF alternating current, around 400 kHZ is induced to open pipe by means of a coil, called inductor. This induced current tends to flow open pipe edges and to concentrate convergence point, because of two physical phenomena, skin effect and proximity effect. By this way, open pipe edges heated up to welding temperature. After that, edges are forced by squeezing rollers and welding is completed. In high frequency pipe welding process, to know and control welding conditions is essential to obtain high welding reliability. In this thesis, welding parameters such as geometry of V-opening, the distance between convergence point and welding point, inductive energy input, inductor and impeder design and locations, oxide formation and other foreign impurities, welding temperature and its control system are examined. The welded zone is also investigated in order to determine heat affected zone properties. Addition to that, formability of characteristics of welded pipes as a function of above parameters are also investigated by some technological and metallographicai examination.
Benzer Tezler
- İki farklı metodla üretilen yapısal çelik profillerin mikroyapı ve mekanik özelliklerinin incelenmesi
Examination of microstructure and mechanical properties of structural steel profiles produced by two di̇fferent methods
MURAT DÖKMECİ
Yüksek Lisans
Türkçe
2024
Metalurji MühendisliğiDüzce Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERKAN APAY
- Profil boru üretiminin yaşam döngüsü değerlendirmesi
Life cycle assessment of profile pipe production
İREM ŞANAL
Yüksek Lisans
Türkçe
2020
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Bilimleri Ana Bilim Dalı
PROF. DR. FATOŞ GERMİRLİ BABUNA
- Demir esaslı toz metal parçalarının yüksek frekanslı indüksiyon cihazı ile kaynağının yapılması
Başlık çevirisi yok
İBRAHİM GÜLŞAHİN
Yüksek Lisans
Türkçe
2014
Makine MühendisliğiCelal Bayar ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. UĞUR ÇAVDAR
- Manganlı çelik borularda kaynak parametrelerinin kaynak akışına, mikroyapıya ve mekanik özelliklere etkisinin araştırılması
Effect of welding parameters on welding flow, microstructure and mechanical properties in manganese steel
GÜLBAHAR ALKUŞ
Yüksek Lisans
Türkçe
2023
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ HAKAN YILMAZER
- Yüksek frekans indüksiyon kaynaklı borularda kaynak parametrelerindeki değişimin mekanik özelliklere ve kaynak dikişi geometrisine etkisinin incelenmesi
Investigation of the effect of welding parameters to the mechanical properties and weld seam geometry of high frequency induction welded tubes
İSMAİL AYKUT AVCI
Yüksek Lisans
Türkçe
2010
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. MURAT VURAL