Termoform makinaları üreten bir firmada yalın altı sigma uygulaması
Lean six sigma application in a company that manufactures thermoforming machines
- Tez No: 672723
- Danışmanlar: DR. ÖĞR. ÜYESİ ZEYNEP GERGİN
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: Türkçe
- Üniversite: İstanbul Kültür Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Mühendislik Yönetimi Bilim Dalı
- Sayfa Sayısı: 145
Özet
Günümüzde işletmelerin en önemli sorunlarından biri başarının sürdürülebilirliğidir. Birçok işletme kendisini kanıtlamasına rağmen kısa süre içerisinde pazardaki yerini kaybedebilmekte veya başarı oranı azalabilmektedir. İşletmelerin başarı oranlarını düşürmeden sürekli olarak yenilikler yaparak pazardaki yerini koruması ve müşteri memnuniyetini sürekli olarak yüksek oranda tutması gerekmektedir. Bu amaç ile işletmeler sürekli olarak süreçlerini iyileştirmeye ve işletme içerisindeki israfları azaltmaya uğraşmaktadırlar. Bu amaç bağlamında israfları azaltmaya yönelik“Yalın Yönetim”felsefesi ve kalitenin de yükseltilmesi için süreçleri analiz etmeye yardımcı olan“Altı Sigma”yöntemleri literatürde yaygın olarak karşımıza çıkmaktadır. Son dönemlerde ise, bu iki yönetim felsefesinin bir arada kullanılması ile“Yalın Altı Sigma”yöntemi geliştirilmiştir. Bu birleşik yöntemin uygulanmasının temel amacı, işletme içerisindeki israfları azaltmak için Altı Sigma uygulama adımları ile Yalın Üretim yöntemlerini uygulamaktır. Bu çalışma sipariş üzerine Termoform makineleri üreten bir işletmede bu bütünleşik yöntemin uygulanması yoluyla süreçlerin iyileştirilmesi amacıyla başlatılmıştır. Son yıllarda termoform makineleri ile üretilen tek kullanımlık plastik kaplara olan talep artmıştır ve makine müşterileri sipariş ettikleri makinalarının ivedilikle sevk edilmesini istemektedirler. Makinelerin arızasız çalışması da yine yatırımcılar için oldukça önemli bir kriterdir. Bu çalışma ile işletmede makinelerin hatasız ve daha kısa terminlerde üretilmesini sağlamak için Yalın Altı Sigma projesi uygulanmıştır. Çalışma kapsamında işletmedeki depolama alanları ve montaj hattı incelenerek, tespit edilen israfların ortadan kaldırılması hedeflenmiştir. Böylece makinenin müşteriye teslim süresinin azalması, üretim kapasitesinin artması ve montaj hatalarının ortadan kalkması bağlamında müşterilerin işletmeye olan güveninin artması sağlanacaktır. Yapılan iyileştirmeler ile üretim hızı %20 arttırılmıştır. Çalışmanın başında 3,4 olarak ölçülen hatasız üretim sigma seviyesi ise %17,5 arttırılarak, 4,0 değerine ulaştırılmıştır.
Özet (Çeviri)
One of the most important problem of enterprises is the sustainability of success. Although many enterprises prove themselves, they can lose their place in the market in a short time or their success rate may decrease. Enterprises need to maintain their place in the market by constantly innovating without decreasing their success rates and to keep customer satisfaction at a high level. Following this purpose, enterprises constantly make an effort to improve their processes and reduce waste within the enterprise. In the context of this purpose, the philosophy of“Lean Management”aimed at reducing waste and“Six Sigma”methods that help to analyze processes to increase quality are common in the literature. Recently, the“Lean Six Sigma”method has been developed by using these two management philosophies together. The main purpose of this combined method is to apply lean production methods with Six Sigma application steps in order to reduce waste within the enterprise. This study was initiated with the aim of applying this integrated method for process improvement in an enterprise which produce thermoforming machines on order. In recent years, the demand of disposable plastic containers which are produced with thermoforming machines has increased. Customers which order thermoforming machines want their machines to be shipped immediately because of the this increase of demand. In addition to fast shipping, smooth functioning machine is a very important criterion for investors. With this study, the Lean Six Sigma project was used in order to ensure the production of the machines in the enterprise without error and in shorter deadlines. Within the scope of the study, aimed to eliminate the detected waste by examining the storage areas and assembly line in the enterprise. Thus, customers confidence will be increased to the enterprise in the context of reducing the delivery time of the machine to the customer, increasing production capacity and eliminating assembly errors. Production speed has been increased by 20% with the improvements made. The error-free production sigma level which was measured as 3.4 at the beginning of the study, was increased by 17.5% and reached reached to 4.0.
Benzer Tezler
- Thermoform kalıplarında itici tasarımları ve uygulama parametrelerinin belirlenmesi
Determining design and application parameters in thermoform molds
EROL BÜKER
Yüksek Lisans
Türkçe
2019
Polimer Bilim ve TeknolojisiSakarya Uygulamalı Bilimler Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MUSTAFA DENKTAŞ
- Buzdolabı sebzeliklerini kontrollü nemlendirme ünitesi tasarımı
Controlled humidifying unit design for refrigerator crispers
OGÜN HIZAR
Yüksek Lisans
Türkçe
2020
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ZEYNEP PARLAR
- Termoform kalıplarının üretim süreçlerinde verimliliğe etki eden faktörler
Factors affecting efficiency in the production process of thermoforming molds
HATİCE KÜBRA KÜRÜMOĞLU
Yüksek Lisans
Türkçe
2024
Makine Mühendisliğiİstanbul Üniversitesi-CerrahpaşaAmbalaj Teknolojileri Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ORHAN SEVİNDİK
- Rezistansla ısıtılan termoform kalıp kurutma sistemlerinin kararlı hal koşullarında ısı dağılımı analizi
Heat distribution analysis under steady state conditions of thermoform mold drying systems heated with resistance
DURMUŞ ÇAKAR
Yüksek Lisans
Türkçe
2021
Mühendislik BilimleriPamukkale ÜniversitesiOtomotiv Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ EYLEM YILMAZ ULU
- Polivinilklorür ve polietilen çift katmanlı ambalaj malzemesinin özelliklerine termoform kalıplama parametrelerinin etkileri
The effects of parameter of thermal moulding process characteristics of polyvinyl chloride and polythene double layer package materials
CAFER ALSAÇ
Yüksek Lisans
Türkçe
2008
Polimer Bilim ve TeknolojisiMarmara ÜniversitesiMetal Eğitimi Ana Bilim Dalı
DOÇ. DR. MUSTAFA ÖKSÜZ