Nano bor katkısının yüksek sıcaklık süperiletken seramiklere etkilerinin incelenmesi
Investigation of nano boron doping effects into high temperature superconductor
- Tez No: 678484
- Danışmanlar: DR. ÖĞR. ÜYESİ SELVA BÜYÜKAKKAŞ
- Tez Türü: Doktora
- Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: Türkçe
- Üniversite: Niğde Ömer Halisdemir Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 158
Özet
Bu tez çalışmasında YBCO (Y123) tabanlı Sm1.75Ca2.20-xBxCu3.4Oy (x = 0, 0,4, 0,8 ve 1,0) başlangıç kompozisyonuna uygun nano-Bor katkılı süperiletken seramik malzemeler katı-hal tepkime yöntemiyle üretildi. Üretilen malzemeler için DTA, EDX, SEM, XRD, Manyetik Kaldırma (Levitasyon) Kuvveti ölçümleri ve Manyetik Duyarlılık (Stiffness) hesaplamaları yapıldı. Üretilen süperiletken seramiklerin XRD ölçümlerindeki piklere ait (hkl) miller indisleri belirlenerek, a,b ve c örgü parametreleri, kristal hacmi, spektrumdaki piklerin FWHM değerleri ve parçacık büyüklüğü gibi parametreler hesaplandı. Belirlenen XRD piklerinden, malzemede artan nano-bor katkısı ile güçlenen ya da zayıflayan piklerin, şiddet yoğunluklarından yola çıkarak, ortorombik fazdan tetragonal faza dönüşümün gerçekleştiği görüldü. Malzemeye ait kristalografik uzay grubunun, tetragonal kristal yapı için P4/mmm ve ortorombik kristal yapı için Pmmm olduğu belirlendi. Manyetik duyarlılık levitasyon eğrilerinin eğiminden hesaplanmıştır. Bu çalışmadan elde edilen manyetik kaldırma kuvveti ve manyetik sertlik ile ilgili verilerin Maglev ve taşıyıcı sistemlerin teknolojik uygulamalarına katkı sağlayacağı muhtemeldir.
Özet (Çeviri)
In this thesis YBCO (Y123) based Sm1.75Ca2.20-xBxCu3.4Oy (x = 0, 0,4, 0,8 and 1,0) suitable nominal composition of nano-boron doped superconducting ceramic materials is produced by solid-state reaction method. DTA, EDX, SEM, XRD, Magnetic Levitation Force measurements and Magnetic Stiffness calculations were made for the produced materials. Parameters such as miller indices (hkl) of the peaks in XRD measurements, a,b and c lattice parameters, crystal volume, FWHM values of the peaks in the spectrum and particle size of the produced superconducting ceramics were calculated. From the determined XRD peaks, it was observed that the transformation from orthorhombic phase to tetragonal phase occurred based on the intensity of the peaks, which were strengthened or weakened by the increasing of the nano-boron doped in the material. It was determined that the crystallographic space group of the material was P4/mmm for tetragonal crystal structure and Pmmm for orthorhombic crystal structure. Magnetic stiffness was calculated from the slope of the levitation curves. It is probable that the magnetic levitation and magnetic stiffness data obtained from this study will contribute to the technological applications of Maglev and carrier systems.
Benzer Tezler
- Bor karbür katkılı PMMA (polimetil metakrilat) polimerkompozitlerin ATRP metodu ile sentezi ve karakterizasyonu
Synthesis and characterization of boron carbide additived PMMA (polymethyl methacrylate) polymer composites by ATRP method
DUYGU TULUK TÜRKMANİ
Yüksek Lisans
Türkçe
2023
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. CÜNEYT ARSLAN
PROF. DR. NİLGÜN BAYDOĞAN
- B4C-TiB2 nanokompozit tozlarının kendiliğinden ilerleyen yüksek sıcaklık sentezi (SHS) ile üretimi, proses optimizasyonu ve spark plazma sinterleme (SPS) prosesine shs nanotozlarının etkisi
Production of B4C-TiB2 nanocomposite powder by self-propagating high temperature synthesis (SHS), process optimization and effect of SHS nanoparticles on spark plasma sintering (SPS) process
OZAN ÇOBAN
Doktora
Türkçe
2023
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MAHMUT ERCAN AÇMA
- Kendiliğinden ilerleyen yüksek sıcaklık sentezi yöntemi ile B4C üretiminde katalizörlerin etkilerinin araştırılması
The investigation of effects of catalysts on the production of B4C via self propagating high temperature synthesis
HASAN ÖZER
Yüksek Lisans
Türkçe
2014
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ONURALP YÜCEL
- Improvement of electrical and photocatalytic properties of boron-doped ZnO nanorods and synthesis design optimization by taguchi approach
Bor-katkılı ZnO nanorodlarinin elektriksel ve fotokatalitik özelliklerinin geliştirilmesi̇ ve taguchi yaklaşımı ile sentez tasarımının optimizasyonu
ERAY TABAK
Yüksek Lisans
Türkçe
2024
Bilim ve Teknolojiİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
DOÇ. DR. BİRGÜL BENLİ
- Development and characterization of ceramic nanofiber membranes for dye removal from textile wastewater
Tekstil atıksularından boya giderimi için seramik nanofiber membranların geliştirilmesi ve karakterizasyonu
NURAY YERLİ SOYLU
Doktora
İngilizce
2024
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. MELEK MÜMİNE EROL TAYGUN