Geri Dön

İnsan asansörü tasarımındaki parametrelerin irdelenmesi

Başlık çevirisi mevcut değil.

  1. Tez No: 68251
  2. Yazar: YILMAZ ÖZTÜRK
  3. Danışmanlar: YRD. DOÇ. DR. OSMAN ELDOĞAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Eğitim ve Öğretim, Makine Mühendisliği, Education and Training, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1997
  8. Dil: Türkçe
  9. Üniversite: Sakarya Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Eğitimi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 63

Özet

ÖZET

Özet (Çeviri)

SUMMARY KeyAvords: Arlift. Menlift Although the lifts are often come by and used by man in daily life, in this study they are not only taken as vertical transportation machines, but also studied as important machines including very important factors. Therefore there are some important criterions that should be considered when someone is choosing a lift for a bulding or industrial astate. As the purpose of the vertical transportation is to transport, this transportation should be within the shortest time and in the safest way, to be able to fulfill the purpose the desing and the plan parameters must be chosen carefully and be obeyed. As lift trip starts with the press of a button if finishes by passengers stepping out of the lift cabin. To be able to make the journey in the shortest time and the safest way, it is necessary to choose the lift design parameters in the most convenient way and the kind of points that should be paid attention to is explained. The aim is to serve man at the maximum level by calculating lift traffic according to these parameters. Considering the lift assembly is done any once or to replace is very costly; it is necessary to be careful with some lift parameters when choosing them first. Then calculation of lift traffic should be done beforehand to provide a comfortable service. Other wise when there is a traffic jam the lift will became a torturing machine instead of a service machine, or if there is a very seldom usage of the lift there will be an unnecessary financial cost for the lift owner and the national economy. Considering these aspects, so far lifts have been produced disregarding all these parameters which are considered during lift designs. From now on parameters should be chosen according to service conditions and according to the traffic calculation results which were done in the light of these parameters and the lifts should be presented for service in the most convenient conditions. In this study the importance of this subject is emphasized.

Benzer Tezler

  1. Tez No

    600357

    An evaluation of İstanbul high rise building facades due to the main criteria expected from facades design

    İstanbul'da bulunan yüksek bina cephelerinin belirlenen performans kriterlerine göre değerlendirilmesi

    ELAHEH FARBOODNIA

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    DOÇ. DR. SEDEN ACUN ÖZGÜNLER

  2. Tez No

    324484

    Görme engellilerin mekan okumasına etki eden parametrelerin saptanması

    Determination of the parameters that affect the spatial legibility of the visually impaired people

    ÖZLEM BELİR

    Doktora

    Türkçe

    Türkçe

    2012

    MimarlıkYıldız Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. DENİZ ERİNSEL ÖNDER

  3. Tez No

    601260

    Otomatik depolama ve boşaltma sistemleri tasarım parametreleri ve hızlı tüketim ürünleri sektöründe uygulanması

    Automatic storage and retrieval system design parameters and implementation of fast moving consumer goods sector

    YASİN EMRE BURAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Endüstri ve Endüstri Mühendisliğiİstanbul Teknik Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MURAT BASKAK

  4. Tez No

    389293

    A decision support model for elevator system design in tall buildings

    Yüksek binalarda asansör sistemi tasarımı için karar destek modeli

    AYŞE ÇOLAKOĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2015

    Mimarlıkİstanbul Teknik Üniversitesi

    Bilişim Ana Bilim Dalı

    PROF. DR. GÜLEN ÇAĞDAŞ

  5. Tez No

    505954

    Asansör askı halatının belirsizliğe dayalı mukavemet ve ömür analizi

    Uncertainty-based strength and life analysis of the wire rope of a passenger lift

    ALİ ŞAHİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Makine MühendisliğiKaramanoğlu Mehmetbey Üniversitesi

    İleri Teknolojiler Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MURAT MAYDA

Geri Dön