Farklı türde bağlayıcı içeren kompozitlerin elastisite modülünün belirlenmesi
Determination of the elasticity modul of composites containing different kind of binders
- Tez No: 684078
- Danışmanlar: PROF. DR. ADNAN ÇOLAK
- Tez Türü: Yüksek Lisans
- Konular: Mimarlık, Architecture
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: Türkçe
- Üniversite: Trakya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Mimarlık Ana Bilim Dalı
- Bilim Dalı: Mimarlık Bilim Dalı
- Sayfa Sayısı: 35
Özet
Bu tez çalışmasında farklı türde bağlayıcı içeren kompozitlerin elastisite modülleri tahmin edilmeye çalışılmıştır. Bu amaçla alçı – beyaz Portland çimentosu ve kireç – alçı – beyaz Portland çimentosu karışımlarının elastisite modülleri deneysel olarak bulunmuştur. Deneysel sonuçlar literatürde mevcut mikro mekanik ve bu çalışmada önerilen modellerin teorik sonuçlarıyla karşılaştırılmıştır. 𝑅𝑒𝑢𝑠𝑠, 𝐻𝑖𝑟𝑐ℎ ve 𝑃𝑜𝑝𝑜𝑣𝑖𝑐𝑠 modelleri alçı – beyaz Portland çimentosu karışımları için mükemmel sonuçlar vermektedir. Ancak 𝐻𝑖𝑟𝑐ℎ ve 𝑃𝑜𝑝𝑜𝑣𝑖𝑐𝑠 modelleri katsayı içerdiğinden önceden tahmin işlemi zorlaşmaktadır. Öncelikle bu denklemlerin katsayılarının hesaplanması ve tahmin işleminin elde edilen sonuçlara göre yapılması gerekir. Bu nedenle en iyi model katsayı içermeyen 𝑅𝑒𝑢𝑠𝑠 modelidir. Kireç – Alçı – Beyaz Portland çimentosu karışımlarının elastisite modülleri literatürdeki mevcut modellerle tahmin edilemez. Bu modeller daha çok ikili sistemlerin (bağlayıcı-agrega, bağlayıcı lif) elastisite modüllerini tahmin etmek için tasarlanmıştır. Belirli bir agrega ya da lif oranına kadar deneysel sonuçlara mükemmel uyum göstermektedirler. Kireç – Alçı – Beyaz Portland çimentosu karışımından oluşan üçlü sistemler için bu çalışmada bir model önerilmiştir. % 10 kireç + % 40 Alçı + % 50 Beya𝑧 𝑃ortland Çimentosu ve % 10 kireç + % 50 Alçı + % 40 Beyaz Portland Çimentosu v karışımları için başarılı tahminler yapılmıştır. Diğer karışım oranlarında birim hücre modelin yapısı değiştiği için modelin yeniden düzenlenmesi gerekir. Düzenleme işlemi toplam şekil değiştirme prensibine göre yapılır.
Özet (Çeviri)
In this thesis, it has been tried to predict the modulus of elasticity of composites which includes different analysis. Elasticity modules of such gypsum - white Portland cement and lime - gypsum - white Portland cement mixtures are experimentally found. The experimental results are compared with the theoretical results of micro mechanics and these contamination models available in the literature. 𝑅𝑒𝑢𝑠𝑠, 𝐻𝑖𝑟𝑐ℎ and 𝑃𝑜𝑝𝑜𝑣𝑖𝑐𝑠 models give excellent results for plaster - white Portland cement mixes. However, since the Hirch and Popovics models contain coefficients, the prediction process becomes difficult. First of all, the coefficients of these equations should be calculated and the estimation process should be done according to the results obtained. Therefore, the best model is the Reuss model without coefficient. The modulus of elasticity of Lime - Gypsum - White Portland cement mixtures cannot be predicted with models in the literature. These models are mostly used to estimate the modulus of elasticity of binary systems (binder-negotiated binder fiber). They fit perfectly into experimental results up to a unified agreement or survival rate. Such a model has been proposed for triple triads of a mixture of Lime - Gypsum - White Portland cement. 10 % lime + 40 % Gypsum + 50 % White Portland Cement and 10 % lime + 50 % Gypsum + 40 % White Portland Cement vii Successful predictions have been made for mixtures. As the cell model changes with other mixing ratios, the model has to be rearranged. The editing process is done according to the completion change principle.
Benzer Tezler
- Polipropilen ve dolgu maddeleri ile hazırlanan karışımların fiziksel ve kimyasal özelliklerinin incelenmesi
Preparation mixtures which contain polypropylene and fillers, and investigating its physical and mechanical properties
MEHMET KODAL
Yüksek Lisans
Türkçe
2009
Kimya MühendisliğiKocaeli ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. ENVER DEMİRHAN
- Piezomimetic ceramic production for bone biomaterial development
Kemik biyomalzemeleri geliştirme amaçlı piezomimetik seramik üretimi
AYBÜKE ÜRETMEN
Yüksek Lisans
İngilizce
2023
Biyomühendislikİstanbul Teknik ÜniversitesiMoleküler Biyoloji-Genetik ve Biyoteknoloji Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ABDULHALİM KILIÇ
- Effect of cryogenic conditions on the properties of synthetic and biological cryogels
Sentetik ve biyolojik kriyojellerin özelliklerine kriyojenik koşulların etkisi
GAMZE DÖŞER
- Fabrication and characterization of lanthanum manganite based perovskite nanomaterials for electrochemical capacitors
Elektrokimyasal kapasitörler için lantan manganez oksit esaslı perovskit nanomalzemelerin üretimi ve karakterizasyonu
ESRA BİNİCİ
Yüksek Lisans
İngilizce
2019
Kimyaİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ NURİ SOLAK
DR. CEREN YILMAZ AKKAYA
- Ranitidin hidroklorürün toz, granüle ve tablet özelliklerine nemin etkisi
Başlık çevirisi yok
KAMURAN UZUNARSLAN