Geri Dön

İşletmeler için çevik ilkelere dayalı bir ERP uygulama metodunun geliştirilmesi

Developing an agile principles-based ERP implementation method for business

  1. Tez No: 710708
  2. Yazar: GÜLAY EKREN
  3. Danışmanlar: PROF. DR. AYKUT HAMİT TURAN
  4. Tez Türü: Doktora
  5. Konular: İşletme, Business Administration
  6. Anahtar Kelimeler: Kurumsal Kaynak Planlama, Yazılım Geliştirme Yaşam Döngüsü, ERP Yaşam Döngüsü, Süreç Yönetimi, Çeviklik, Enterprise Resource Planning, Software Development Life Cycle, ERP Life Cycle, Process Management, Agility
  7. Yıl: 2021
  8. Dil: Türkçe
  9. Üniversite: Sakarya Üniversitesi
  10. Enstitü: İşletme Enstitüsü
  11. Ana Bilim Dalı: Yönetim Bilişim Sistemleri Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 272

Özet

Kurumsal kaynak planlama (ERP) sistemleri, endüstriyel dünyada çok sayıda firma tarafından yaygın olarak uygulanmaktadır. Bu uygulamaların işletmelerde sayısız başarı öyküleri olsa da önemli bir kısmı başarısızlıkla sonuçlanmaktadır. Bu çalışmanın amacı ERP uygulamaları konusunda deneyimli uzmanların görüşleri doğrultusunda işletmeler için çevik ilkelere dayalı bir ERP uygulama metodu geliştirmektir. Bu bağlamda, öncelikle, uzman görüşleri doğrultusunda ERP uygulama yaşam döngüsünün (uygulama öncesi, uygulama aşaması, uygulama sonrası) her aşamasında Yazılım Geliştirme Yaşam Döngüsü (SDLC) yaklaşımının Planlama, Tasarım, Analiz, Geliştirme, Test & Entegrasyon ve Bakım süreçleri açısından bir ERP uygulamasında yapılması beklenen temel iş uygulamaları değerlendirilmiştir. Araştırmada keşfedici karma yöntem yaklaşımı kullanılmıştır. Araştırmanın ilk bölümünde (nitel), Delphi yöntemi kullanılarak ERP Yaşam Döngüsü boyunca bir işletmede gereksinim duyulan iş uygulamaları ortaya konulmuştur. Bu bölüm fenomenolojik araştırma yaklaşımı ile iç içe geçmiş çoklu durum çalışması şeklinde desenlenmiştir. Araştırmanın ikinci bölümünde (nicel), ERP Yaşam Döngüsünün bütününe ilişkin öngörülerde bulunmak amacıyla SDLC bağlamında yaşam döngüsünün her bir adımı için PLS-SEM yaklaşımıyla üç farklı model geliştirilmiştir. Elde edilen bulgulara göre; ERP uygulama öncesinde, Analiz sürecindeki toplam varyansın %54'ü, Tasarım sürecinde %47'si, Geliştirme sürecinde %44'ü, Test & Entegrasyon“ sürecinde %50'si, Bakım”sürecinde ise %28'i açıklanabilmektedir. Uygulama öncesinde; Planlama süreci Analiz sürecini, Analiz süreci Tasarım sürecini ve Tasarım süreci Bakım sürecini yüksek düzeyde etkileme gücüne sahiptir. Diğer yandan Tasarım süreci Test & Entegrasyon ve Geliştirme süreçlerini orta düzeyde etkilerken, Planlama süreci, Geliştirme sürecini düşük düzeyde etkilemektedir. ERP uygulama aşamasında, Analiz sürecindeki toplam varyansın %26'sı, Tasarım sürecinde %58'i, Geliştirme sürecinde %37'si, Test & Entegrasyon sürecinde %39'u, Bakım sürecinde %22'si açıklanabilmektedir. Uygulama aşamasında Analiz sürecinin Tasarım sürecini, Planlama sürecinin Test & Entegrasyon sürecini ve Analiz sürecini yüksek düzeyde etkileme gücü bulunmaktadır. Diğer yandan Analiz süreci Bakım ve Geliştirme süreçlerini orta düzeyde etkilerken, Planlama süreci, Geliştirme ve Bakım süreçlerini düşük düzeyde etkilemektedir. ERP uygulama sonrasında, Planlama ve Tasarım süreci yer almamaktadır. Modelde, Test & Entegrasyon sürecindeki toplam varyansın %38'i, Geliştirme sürecinde %36'sı, Bakım sürecinde %40'ı açıklanabilmektedir. Uygulama sonrasında Test & Entegrasyon süreci, Bakım sürecini, Tasarım süreci, Geliştirme sürecini yüksek düzeyde etkileme gücü vardır. Diğer yandan Geliştirme süreci, Test & Entegrasyon sürecini orta düzeyde etkilerken, Tasarım süreci, Test & Entegrasyon sürecini düşük düzeyde etkilemektedir. Araştırma kapsamında ERP proje yöneticilerine, MIS uygulayıcılarına rehberlik sağlayabilecek uygulama tasarım önerileri sunulmaktadır.

Özet (Çeviri)

Enterprise resource planning (ERP) systems are widely implemented by a large number of companies in the business industry. Although ERP implementations have successful stories in enterprises, a significant part of them either fail or even if they are successful, they would not meet the expected targets of the enterprises. This study aims to develop a method based on agile principles for enterprises by following the opinion of the experts in ERP implementations. In this context, first of all, basic business practices in every phase of the ERP implementation life cycle (pre-implementation, implementation phase, post-implementation) have been evaluated in line with expert opinions, as well as Planning, Design, Analysis, Implementation, Test & Integration, and Maintenance processes of the Software Development Life Cycle (SDLC) approaches. In this research, an exploratory mixed-method approach was employed. In the first part of the research (qualitative), the business applications needed in a business throughout the ERP Life Cycle were revealed by using the Delphi method. This part is designed as an embedded multi-case study with the phenomenological research approach. In the second part of the research (quantitative), three distinct models were developed with the PLS-SEM approach for each step of the life cycle in the context of SDLC in order to make predictions about the whole ERP Life Cycle. According to the findings; during the ERP pre-implementation, 54% of the total variance in the Analysis process, 47% in the Design process, 44% in the Development process, 50% in the Test & Integration process, and 28% in the Maintenance process can be explained. In the pre-implementation phase; the Planning process has the power to influence the Analysis process, the Analysis process to the Design Process, and the Design process to the Maintenance process at a high level. On the other hand, the Design process has a moderate impact on the Test & Integration, and Development processes, while the Planning process has a low impact on the development process. In the ERP implementation phase, 26% of the total variance in the Analysis process, 58% in the Design process, 37% in the Development process, 39% in the Test & Integration process, and 22% in the Maintenance process can be explained. In the implementation phase, the Analysis process has the power to affect the Design process as well as the Planning process, the Test & Integration process, and the Analysis process at a high level. On the other hand, the Analysis process affects the Maintenance and Development processes at a moderate level, while the Planning process affects the Development and Maintenance processes at a low level. During the ERP post-implementation, there is no need for the Planning or Design process. In the model, 38% of the total variance in the Test & Integration process, 36% in the Development process, and 40% in the Maintenance process can be explained. During this phase, the Test & Integration process has the power to influence the Maintenance process, Design process as well as Development process at a high level. On the other hand, the Development process affects the Test & Integration process moderately, while the Design process has a low impact on the Test & Integration process. Within the scope of the research, implementation design suggestions that can provide guidance to ERP project managers and MIS practitioners are presented.

Benzer Tezler

  1. Döviz kuru değişmelerinin finansal tablolara etkileri ve Türkiye

    The Effects of foreign exchange rates changes on financial statements and applications of Turkey

    ORHAN ÇELİK

    Doktora

    Türkçe

    Türkçe

    2001

    İşletmeAnkara Üniversitesi

    İşletme Ana Bilim Dalı

    PROF. DR. YÜKSEL KOÇ YALKIN

  2. Türkiye'de kamu iktisadi teşebbüsleri gelişimi-hukuki yapısı özelleştirme çalışmaları

    Başlık çevirisi yok

    MİNE ÖZAYDINLIK

    Yüksek Lisans

    Türkçe

    Türkçe

    1987

    Ekonomiİstanbul Üniversitesi

    İktisat Ana Bilim Dalı

    PROF. DR. TÜRKAN ÖNCEL

  3. İşletmelerdeki dijital dönüşümün işletmenin müşteri, maliyet, kalite ve zaman performansına etkisinde çevik dönüşümün düzenleyici rolü

    The moderator role of the agile transformation on the digital transformation in order to increase the business performance measured by customer satisfaction, cost, quality and time to market dimensions

    ALİ ÇÖPLÜ

    Doktora

    Türkçe

    Türkçe

    2023

    Bankacılıkİstanbul Okan Üniversitesi

    Bankacılık ve Finans Ana Bilim Dalı

    PROF. DR. UĞUR YOZGAT

  4. Yalın üretim ve dijitalizasyon (endüstri 4.0 + endüstri 5.0): Çok boyutlu etkileşim matrisi ve üretim firmaları için kurulum, geliştirme stratejileri ve değerlendirme modeli

    Lean+digitalization (Industry 4.0 + industry 5.0): Multi-domain matrix as a reference implementation and improvement strategies for manufacturing companies and assessment model

    HASAN OKTAY GÖKTAŞ

    Doktora

    Türkçe

    Türkçe

    2024

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolSakarya Üniversitesi

    Bilgisayar Mühendisliği Ana Bilim Dalı

    PROF. DR. NEJAT YUMUŞAK